Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Insert ear-probe assembly for high-quality otoacoustic-emission (OAE) measurements in adults

    SBC: Mimosa Acoustics Inc.            Topic: N10AT032

    OAE has proved to be an important measurement for hearing conservation programs. OAEs are sounds made by healthy inner ears in response to acoustic stimulation and are measured in the ear canal with a miniature microphone. One impediment to OAE testing on a large scale, such as in military hearing conservation programs, is the lack of a high-quality, reliable ear-probes which house the miniature m ...

    STTR Phase II 2011 Department of DefenseNavy
  2. Innovative improvements to High-Frequency Simulation Methods for Installed Antenna Performance

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103197

    Delcross proposes to systematically validate the Savant and Savant-Hybrid ray tracing solvers for a wide variety of installed antenna configurations, including far-field patterns, near-field distributions, and antenna-to-antenna coupling. Reference benchmarks will be developed from full-wave solvers, measurements, and analytic solutions. When shortcomings in existing methods/algorithms are identif ...

    SBIR Phase II 2011 Department of DefenseNavy
  3. Integrated Communications System-Next

    SBC: Rite-solutions, Inc.            Topic: N101047

    Rite-Solutions proposes continued development of a new generation of Interior Communications System (ICS-Next) to reduce Total Ownership Costs (TOC) by lowering acquisition, installation, and maintenance cost while moving shipboard communications functionality into the 21"st century. To accomplish these goals, this proposal describes how the ICS-Next network, announcing, and information assuranc ...

    SBIR Phase II 2011 Department of DefenseNavy
  4. Improved Safety in Large Format Lithium-Ion Cells and Batteries

    SBC: Yardney Technical Products, Inc.            Topic: N093197

    Li-ion batteries are attractive candidates for use as power sources in military, aerospace, commercial, and vehicular applications. Outstanding properties of Li-ion include longer battery life, reduced weight and size, lower maintenance costs, higher power capacity and higher energy densities. However, there are issues with making a truly safe Li-ion battery. For this project, Yardney has approach ...

    SBIR Phase II 2011 Department of DefenseNavy
  5. Novel Methods to Monitor Health Status and Clinical Laboratory Data: Portable Acquisition, Assessment, and Reporting

    SBC: Mimosa Acoustics Inc.            Topic: OSD09H26

    Mimosa Acoustics will develop a portable binaural audiological device, based on our successful HearID system. HearID is a clinical system for otoacoustic emission and middle-ear power analysis testing; it is FDA and CE-marked. The new system will have the ability to conduct a variety of audiological tests especially for use in hearing-conservation programs, including: flexible otoacoustic emission ...

    SBIR Phase II 2011 Department of DefenseDefense Health Program
  6. Development of Electronic Controlled Fuel Injector and Pump Suitable for 5-20 Horsepower Diesel Cycle Engines

    SBC: KINETIC BEI LLC            Topic: N10AT033

    Phase II will enable KBEI to demonstrate a complete high pressure Micro Injection System on a Navy UAV engine in a laboratory environment. While the Micro Injectors and Micro Pump have been successfully proven at lower pressures, this STTR program has facilitated research and development of a higher pressure injection system designed for use with heavy fuels. At the conclusion of the Phase II ST ...

    STTR Phase II 2011 Department of DefenseNavy
  7. Fracture Evaluation and Design Tool for Welded Aluminum Ship Structures Subjected to Impulsive Dynamic Loading

    SBC: Global Engineering and Materials, Inc.            Topic: N10AT041

    A software toolkit for Abaqus (XSHELL) will be developed for fracture evaluation and load deflection prediction of welded aluminum ship structures subjected to impulsive loading. The mesh independent crack description and fracture energy dissipation will be achieved in XSHELL through the implementation of two overlay elements with an embedded cohesive interaction along an arbitrary crack segment w ...

    STTR Phase II 2011 Department of DefenseNavy
  8. Radio Frequency (RF) System Performance and Electromagnetic Interference (EMI) in Dynamic Environments

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103202

    For manned and unmanned vehicles in current military operating environments, many adversary and civilian platforms exist that can be considered non-traditional, unconventional, or otherwise unaccounted for in the design of these vehicles. These unconventional and nontraditional aircraft, ship, and boat targets pose unique challenges to radar system designers, analysts, and operators. To aid in the ...

    SBIR Phase II 2011 Department of DefenseNavy
  9. High Fidelity Helicopter Lag Damper Model for Comprehensive Rotor Analysis

    SBC: Materials Technologies Corporation            Topic: N11AT010

    Helicopters with articulated rotor blades are subject to the well-known ground resonance where the rotor lag mode interacts, in an unstable fashion, with fuselage roll. To eliminate this ground resonance, both lag dampers and fuselage roll dampers are required. The Sikorsky UH-60 helicopter platform, which comprises the vast majority of utility rotorcraft used by the US Army and the Navy, relies u ...

    STTR Phase I 2011 Department of DefenseNavy
  10. Development of an Advanced Severe Service Valve Actuator

    SBC: Ingenium Technologies Corporation            Topic: N111043

    A development program is proposed to address failures experienced on Navy actuators exposed to severe vibration levels. A failure investigation and root cause analysis will be performed to help determine the best approach to improving the design. New design concepts will be built and actual vibration tests will be performed using a Curtiss Wright actuator assembly. Ingenium will leverage experienc ...

    SBIR Phase I 2011 Department of DefenseNavy
US Flag An Official Website of the United States Government