You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Innovative improvements to High-Frequency Simulation Methods for Installed Antenna Performance

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103197

    Delcross proposes to systematically validate the Savant and Savant-Hybrid ray tracing solvers for a wide variety of installed antenna configurations, including far-field patterns, near-field distributions, and antenna-to-antenna coupling. Reference benchmarks will be developed from full-wave solvers, measurements, and analytic solutions. When shortcomings in existing methods/algorithms are identif ...

    SBIR Phase II 2011 Department of DefenseNavy
  2. Novel Methods to Monitor Health Status and Clinical Laboratory Data: Portable Acquisition, Assessment, and Reporting

    SBC: Mimosa Acoustics Inc.            Topic: OSD09H26

    Mimosa Acoustics will develop a portable binaural audiological device, based on our successful HearID system. HearID is a clinical system for otoacoustic emission and middle-ear power analysis testing; it is FDA and CE-marked. The new system will have the ability to conduct a variety of audiological tests especially for use in hearing-conservation programs, including: flexible otoacoustic emission ...

    SBIR Phase II 2011 Department of DefenseDefense Health Agency
  3. Metrology for Optically Precise Conformal Sensor Window

    SBC: APPLIED SCIENCE INNOVATIONS, INC            Topic: N102165

    To meet the need of the Navy in fabrication and measurement of conformal windows, such as toroidal made of spinel, to precise optical tolerances, Applied Science Innovations (ASI) proposes Phase II development of the Interferometric Tomography metrology system, building directly on the Phase I success. The proposed metrology tool is a modular attachment for integrating a standard commercial interf ...

    SBIR Phase II 2011 Department of DefenseNavy
  4. Advanced Modular, Energy Storage Technology

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N091053

    The overall objective of the Phase I and Phase II proposed effort is to design, test and demonstrate the ability of a 500 kW test bed prototype energy storage module to withstand a shipboard environment. The Phase I tradeoff design studies sized and identified a shock tolerant flywheel energy storage modular system configuration that will yield the desired power and energy densities while also hav ...

    SBIR Phase II 2011 Department of DefenseNavy
  5. Radio Frequency (RF) System Performance and Electromagnetic Interference (EMI) in Dynamic Environments

    SBC: DELCROSS TECHNOLOGIES, LLC            Topic: N103202

    For manned and unmanned vehicles in current military operating environments, many adversary and civilian platforms exist that can be considered non-traditional, unconventional, or otherwise unaccounted for in the design of these vehicles. These unconventional and nontraditional aircraft, ship, and boat targets pose unique challenges to radar system designers, analysts, and operators. To aid in the ...

    SBIR Phase II 2011 Department of DefenseNavy
  6. Low Light, Short Wave Infrared, Solid State Photodetector

    SBC: Amplification Technologies, Inc.            Topic: N111032

    The objective of this proposal is to demonstrate the feasibility of the breakthrough technology of internal Discrete Amplification to design and develop low light level single photon sensitive short wave infrared photodetector. These short wave infrared photodetectors will have very high gain, ultra low noise, high detection efficiency and low reset time in the spectral range of 1 m to 2.2 m. The ...

    SBIR Phase I 2011 Department of DefenseNavy
  7. Low Cost, High Reliability Proximity Switches

    SBC: B H TECHNOLOGY LLC            Topic: N111038

    a novel family of proximity switchs is proposed based on EM technology field perturbation.This technology enables the proximity switch to be low cost, light weight, highly accurate and meets all MIL_PRF_24711B requirements. The prposed switch can be used in new NAVY vessel design as well as retrofit for end-of-life mechanical limit switches.

    SBIR Phase I 2011 Department of DefenseNavy
  8. Development of an Advanced Severe Service Valve Actuator

    SBC: INGENIUM TECHNOLOGIES CORP            Topic: N111043

    A development program is proposed to address failures experienced on Navy actuators exposed to severe vibration levels. A failure investigation and root cause analysis will be performed to help determine the best approach to improving the design. New design concepts will be built and actual vibration tests will be performed using a Curtiss Wright actuator assembly. Ingenium will leverage experienc ...

    SBIR Phase I 2011 Department of DefenseNavy
  9. High Load Roller Bearing (HLRB)

    SBC: HY-TEK MANUFACTURING CO., INC.            Topic: N111047

    The High Load Roller Bearing (HLRB) roller for severe service offers a zero-maintenance reliable replacement for bearing sets currently utilized on DDG-51 helicopter bay hanger doors. Enhanced seal design prevents the ingress of liquids and particulates even under extreme environmental conditions and extreme off axis loading. Intended as a direct replacement, modifications to ship doors or structu ...

    SBIR Phase I 2011 Department of DefenseNavy
  10. Innovative Bearing Concepts For High Speed Rotating Machines

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N093184

    Based on the successful analytical and experimental Phase I effort, the MiTi Phase II effort will establish the detailed design of a high damping, high load capacity and robust debris tolerant compliant foil bearing technology for application to high speed rotating machinery including air cycle machines for use in modern military aircraft. The novel sealed, high capacity thrust and journal foil be ...

    SBIR Phase II 2011 Department of DefenseNavy
US Flag An Official Website of the United States Government