You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Novel Methods to Monitor Health Status and Clinical Laboratory Data: Portable Acquisition, Assessment, and Reporting

    SBC: Mimosa Acoustics Inc.            Topic: OSD09H26

    Mimosa Acoustics will develop a portable binaural audiological device, based on our successful HearID system. HearID is a clinical system for otoacoustic emission and middle-ear power analysis testing; it is FDA and CE-marked. The new system will have the ability to conduct a variety of audiological tests especially for use in hearing-conservation programs, including: flexible otoacoustic emission ...

    SBIR Phase II 2011 Department of DefenseDefense Health Agency
  2. Keratin Biomaterials for Cranio-facial Tissue Engineering

    SBC: Keranetics, LLC            Topic: OSD09H10

    The majority of personnel injured in OIF/OEF have suffered blast injuries from IEDs. Blasts often cause cranio-facial trauma that is difficult to repair surgically. The current standard of care involves the placement of fixation devices and off label use of growth factor carriers. These strategies often require multiple surgical interventions creating a significant need for better technologies ...

    SBIR Phase II 2011 Department of DefenseDefense Health Agency
  3. Using Automated Abstractions to Classify System States for Software Health Monitoring

    SBC: ARIES DESIGN AUTOMATION, LLC            Topic: 9040477

    In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  4. Production Methods and Software for NIST Calibration Phantoms

    SBC: SIGMA K CORP            Topic: 9050868TT

    Currently, there are over 10,000 MRI scanners used in the US alone. US citizens today are mobile and many times medical treatments may require MRI scans from several different facilities. Images from MRI scanners can also drift over time. There is a tremendous need for all medical imaging scanners to be on the same level. Sigma-K will develop the commercialization of the ISMRM/NIST MRI Calibration ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  5. Spatiotemporally Controlled Keratin Biomaterial Delivery System for Functional Tissue Regeneration

    SBC: Keranetics, LLC            Topic: OSD10H03

    A principal approach in regenerative medicine is to stimulate or augment endogenous repair mechanisms that promote functional restoration of damaged or diseased tissues. When loss of significant volumes of multiple functionally integrated tissues occurs,

    SBIR Phase I 2011 Department of DefenseDefense Health Agency
  6. Metal Deposition for Microelectronics Using CO2 as a Solvent

    SBC: MiCell Technologies, Inc.            Topic: C3NCERA1

    MiCell Technologies, Inc., proposes a new process for the deposition of metallic thin films of copper, ruthenium, titanium, and other metals used as barrier layers, seed layers, and interconnects. This process would replace the current electroplating approach used in filling deep trenches and forming thin films in microelectronic circuit manufacturing. The electroplating process genera ...

    SBIR Phase I 2004 Environmental Protection Agency
  7. Wireless Underwater Telemetry System for Surface Water Quality Monitoring

    SBC: VORTANT TECHNOLOGIES LLC            Topic: C3NCERB1

    The goal of this Phase I research project is to create a product to revolutionize the planning, installation, damage resistance, and cost effectiveness of in situ, real-time water quality monitoring systems. The proposed project will develop a water quality telemetry system that eliminates the wires, cables, and above-water electronics currently needed for real-time monitoring. Using ...

    SBIR Phase I 2004 Environmental Protection Agency
  8. A Novel Acoustic Biodiesel Production Process from Animal Fats and Waste Grease

    SBC: RESODYN CORPORATION            Topic: C3NCERB3

    The goal of this Phase I research project is to demonstrate the feasibility of an innovative Acoustic Biodiesel Synthesis Reactor (ABSR) with a biodiesel production cost of less than $0.30 per gallon over the cost of feedstock. The target feedstocks are brown, yellow, tallow, restaurant recycled, and trapped grease with high free fatty acid (FFA). The final target biodiesel costs will ...

    SBIR Phase I 2004 Environmental Protection Agency
  9. Microdischarge-Based Multi-Metal Emission Monitoring System

    SBC: Cavition, Inc.            Topic: C3NCERC2

    Caviton, Inc., has developed an ideal microsensor for the continuous monitoring of multiple metals. These detection systems rely on microdischarge technology (patent pending), utilizing the power of emission spectroscopy for parts per billion-level sensitivity and laboratory instrument-level selectivity. Microdischarge sensors provide real-time continuous monitoring of metals (and othe ...

    SBIR Phase I 2004 Environmental Protection Agency
  10. Microfabrication and Micromaching- correct DUN# 142425888

    SBC: Atometric, Inc.            Topic: N/A

    Biotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government