Award Data

In the Phase I effort, GTL will demonstrate the feasibility of the SMFB technology for fusion bonding of thermoplastic matrix composites. GTL will perform a series of experiments to quantify the effectiveness of various SMFB configurations. The effort will also explore several options for introducing the required heat to melt the thermoplastic around the SMFB. Once these data are known, GTL will f ...

ABSTRACT: In order to significantly advance the fidelity and capability of current computational engineering tools, algorithms, techniques, and software which map effectively to emerging massively parallel hardware architectures must be developed. The objective of this project is to investigate and demonstrate specific techniques for enhancing the scalability of computational fluid dynamics (CFD) ...

Bridger Photonics and the University of Arizona will develop a passive multi-band compressive sensor for imaging and object recognition applications. The Army has identified a need for multi-band imagery for intelligence, surveillance and reconnaissance missions among others. Multi-band systems offer enhanced discrimination capability and the ability to perform in adverse conditions (at night, smo ...

ABSTRACT: Alces Technology has developed a novel 1D scanned linear array MEMS microdisplay capable of 8 megapixel images and beyond. In combination with recent developments in semiconductor laser light sources, the Alces Microdisplay provides a low-cost, scalable approach to fulfilling existing and future requirements for UDMs in HMD systems. Combining the Alces Microdisplay with waveguide optics ...

The most significant hardware costs on a missile interceptor propulsion system are associated with the thrusters, for which there are typically four divert thrusters and four, six, or eight attitude control thrusters per interceptor. The largest contributor to the thruster cost is the integrated valve/injector. Integration of the valve and injector into a single body provides the benefits of low d ...

Accurate Automation Corporation (AAC) proposes to develop two useful software tools for the Distributed Common Ground Control Station (DCGS). These tools will help the analyst build more useful products for her customers. AAC will address opportunities for growth within the spectrum of DCGS capabilities. First, AAC will develop a software tool to aid multi-intelligence Verification and Validation ...

Dynamic Structures and Materials, LLC (DSM) proposes the design and development of a high power rotary piezoelectric driven actuator for optical assemblies for kinetic energy weapons. The proposed design uses an ultrasonic piezo ring motor to provide torque and speed. The simplicity of the design allows for very high actuation frequencies without excitation of undesirable modes, producing smooth ...

In response to the proposal solicitation of''Wideband Scalable Multi-channel Digital Receiver/Exciter (DREX)', this proposal presents a phase-I research plan committing to provide a set of study and experiment results, and conceptual design of a scalable coherence method. A new framework for wideband DREX with digitalized channel mismatch compensation is proposed. In the proposed ar ...

Applications for ultrasound are expanding beyond medical imaging to include new functionality, with the potential to halt internal bleeding or provide an alternative to manual suturing. These types of functions are suited to a surgical robot, offering the potential for tele-operation or even autonomous functionality. However, the requirements for positioning an ultrasound device are different th ...

Accurate Automation Corporation will develop a carbon nanotube based microstrip plasma limiter suitable for inclusion on RF printed circuit boards used on the front-end of an X-Band phased-array receiver. This device will capitalize on the ability to use carbon nanotubes to reduce the size and cost of an RF limiter while dramatically increasing the performance. Specific attention will be focused o ...