You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Minimizing Fuel Assembly Distortion in LWRs to Prolong Life and Increase LWR Sustainability

    SBC: CERAMIC TUBULAR PRODUCTS, LLC            Topic: 20c

    Topic 20c of DOEs SBIR solicitation seeks grant applications to develop technologies for the assessment and mitigation of materials degradation in Light Water Reactors in order to extend the service life including methods that can mitigate or predict irradiation and aging effects An important degradation phenomenon that limits the service life and energy production of Light Water Reactor (LWR) ...

    SBIR Phase I 2011 Department of Energy
  2. Computational Design of Weldable High-Cr Ferritic Steel

    SBC: QUESTEK INNOVATIONS LLC            Topic: 22c

    Increasing the steam temperature of supercritical boilers from 1,000F to 1,400F can raise the operating efficiency of next-generation AUSC coal-fired power plants from about 32% to about 42% and address compelling environmental issues, while also enhancing national security, domestic employment, economic stability, balance of trade and U.S. GDP through increased use of domestic coal. Low Cr conten ...

    SBIR Phase I 2011 Department of Energy
  3. High Energy Density Li-ion Battery with Enhanced Safety, Durability, and Sustainability

    SBC: INVENTEK CORP            Topic: 10e

    Conventional Li-ion cells/batteries for hybrid and electric vehicles have difficulty meeting USABC goals for performance/cost that are required for commercially-viable EV. The prevailing large format pouch/prismatic has the advantage of low packaging weight/volume, 10% at cell level, but is doubled (100% increase) in transitioning to the battery. Aside from the reduced energy density (accommodatio ...

    SBIR Phase I 2011 Department of Energy
  4. High-Power High-Eefficiency Amplifiers for Ssynchrotron Light Sources

    SBC: Green Mountain Radio Research Company            Topic: 13d

    Accelerators used in synchrotron light sources require megawatts of radio-frequency energy. They currently employ vacuum-tube power amplifiers or conventional solid-state amplifiers that are inefficient and therefore consume a great deal of prime electrical power. We will review available transistors, analyze high-efficiency power-amplifier techniques, and experimentally evaluate candidate amplifi ...

    SBIR Phase I 2011 Department of Energy
  5. Ultra High Power NSOM Probe Based on Low Loss High Refractive Index Contrast Nanoscale Tip Integrated with Laser and Detector

    SBC: Optonet, Inc            Topic: 16b

    Near-field scanning optical microscope (NSOM) offers the use of a nano-dimension light energy source with a diameter much smaller than the wavelength of light to achieve resolutions significantly (around 10 times) better than that of the usual optical microscope. NSOM has found wide usages and become an important measurement instrument for nano-technologies, nano-manufacturing, optical technologie ...

    SBIR Phase I 2011 Department of Energy
  6. Self-Powered Wireless Sensing and Control of Intelligent Facilities

    SBC: NANOSONIC INC.            Topic: 35a

    Measurement and efficient control of power consumption of High Performance Computing (HPC) and HVAC subsystems within facilities are less than adequate for meeting newly developing and improving efficiency standards. Energy management systems, including sensors, signal processing, feedback and control are needed to increase efficiency, operational cost and intelligence of facilities. Additionall ...

    SBIR Phase I 2011 Department of Energy
  7. Method for the Nondestructive Detection of Cracking in Cast Stainless Steel Components

    SBC: Interwav, Inc.            Topic: 58a

    Cast austenitic stainless steel (CASS) can be found in every light water reactor primary coolant loop system in both boiling water and pressure water nuclear reactors. To date, no effective in-service volumetric nondestructive method exists for the inspection of this material even though some components fabricated from CASS are subject to inspection requirements described in the American Society o ...

    SBIR Phase I 2011 Department of Energy
  8. High Radiation Fluence Tolerant Temperature Sensors for In-Core Use

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: 58a

    The need for high stability measurement of temperature is essential for monitoring incore reactor use in planned Gen-IV reactor designs, especially the next generation nuclear plants (NGNP) such as the SFR (Sodium-cooled Fast Reactors). These reactors are planned to operate by means of fast neutron reactions with neutron fluence up to 1025cm-2. These operating conditions lead to material damage by ...

    SBIR Phase I 2011 Department of Energy
  9. High-Efficiency Power Amplifiers for 325 and 650 MHz

    SBC: Green Mountain Radio Research Company            Topic: 60c

    Accelerators used for nuclear-physics research require megawatts of radio-frequency energy. They currently employ vacuum-tube power amplifiers or conventional solid-state amplifiers that are inefficient and therefore consume a great deal of prime electrical power. We will review available transistors, analyze high-efficiency power-amplifier techniques, and experimentally evaluate candidate amplifi ...

    SBIR Phase I 2011 Department of Energy
  10. High-Efficiency Power Amplifiers for 80, 161, and 322 MHz

    SBC: Green Mountain Radio Research Company            Topic: 44b

    Accelerators used for nuclear-physics research require megawatts of radio-frequency energy. They currently employ vacuum-tube power amplifiers or conventional solid-state amplifiers that are inefficient and therefore consume a great deal of prime electrical power. We will review available transistors, analyze high-efficiency power-amplifier techniques, and experimentally evaluate candidate amplifi ...

    SBIR Phase I 2011 Department of Energy
US Flag An Official Website of the United States Government