You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Environmental Chambers for and Integrating Sphere-based Weathering Device
SBC: MEASUREMENT ANALYSIS CORPORATION Topic: 9060173TTUsing a new concept for humidity control, based on a proprietary saturated air source, MAC will develop a design for an environmental chamber for use with NIST’s SPHERE UV source, in weathering or other UV degradation studies. The chamber will interface to the exit port of the SPHERE, maintaining the material coupons, mounted in a standardized sample holder, at a programmed temperature and relat ...
SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology -
Using Automated Abstractions to Classify System States for Software Health Monitoring
SBC: ARIES DESIGN AUTOMATION, LLC Topic: 9040477In most critical software systems, a state that is partially visible through values passed across interfaces contains information that could determine the health of the software system, and whether a failure is likely in the future. Some of this information behaves in a continuous fashion, e.g., the available memory or disk space is easily interpreted to monitor system health. Other values are nom ...
SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology -
Interferometric Angle Measurement
SBC: Optical Physics Company Topic: 9060263ROptical Physics Company is proposing to implement an interferometric angle sensor for the purpose of determining the relative angle between the two diffracting crystals. Two approaches can be pursued, namely (1) the dual grating interferometer, and (2) the angle interferometer. The estimated cost of materials for building the angle sensor in quantity ranges between $2K and $12K. The expected accur ...
SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology -
Microfabrication and Micromaching- correct DUN# 142425888
SBC: Atometric, Inc. Topic: N/ABiotechnology, aerospace, automotive and communications industries need small ultra-precise, three dimensional parts for component miniaturization. Present metal cutting technology is rapidly reaching its limits. A new technology is required to accelerate this trend. Atometric will pursue innovations in ultra-precision multi-axis machine tools. The machining capacity will be within a cube of 50 mm ...
SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology -
Realizaiton of Large Area Imaging Magnetic Analyzer
SBC: Synchrotron Research, Inc. Topic: N/ATwo distinct designs with performance characteristics for analyzers consistent with the solicitation requirements were delivered in Phase 1. The Phase 1 research and modeling results have been sufficiently conclusive to indicate feasibility of both designs. The more novel of the two designs is proposed: a hybrid magnetic/electrostatic analyzer that features very high collection and transmission ef ...
SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology -
Realizaiton of Large Area Imaging Magnetic Analyzer
SBC: Synchrotron Research, Inc. Topic: N/ATwo distinct designs with performance characteristics for analyzers consistent with the solicitation requirements were delivered in Phase 1. The Phase 1 research and modeling results have been sufficiently conclusive to indicate feasibility of both designs. The more novel of the two designs is proposed: a hybrid magnetic/electrostatic analyzer that features very high collection and transmission ef ...
SBIR Phase II 2004 Department of CommerceNational Institute of Standards and Technology -
ErAs:GaAs Photomixers for High-Resolution THz Spectroscopy
SBC: Physical Domains Topic: N/AA new type of THz photomixer will be developed using a submicron interdigitated-electrode structure fabricated on an Eras:GaAs ultrafast photoconductive layer, an AIAs heat spreader and an AIGas/AIAs dielecric mirror. The Eras:GaAs-based photomixer will provide extremely wide tuning bandwidth (>1 decade) and a continuous-wave output power of roughly 10 microwatt around 100 GHz, at least 1 microwat ...
SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology -
UHV Solid State Detector for Wavelength Dispersive X-Ray Spectrometer
SBC: Radiant Detector Technologies, Llc Topic: N/AWavelength dispersive spectrometers (WDS) are widely used in both scanning electron microscopes and scanning transmission electron microscopes for x-ray elemental analysis and mapping. The WDS systems are typically used to detect x-rays in the 100 eV - 2000 eV energy range, for chemical analysis of elements Be through P. Despite the excellent energy resolution of the WDS systems, they rely on gas ...
SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology -
Intelligent Fire Information System
SBC: INTELLIGENT AUTOMATION CORP. Topic: N/AModern technology has significantly impacted advanced fire alarm systems. As the sophistication of new devices increases, so has the quantity of data they are capable of collecting. However in current alarm systems only a small portion of the available information is used. Without the continuous utilization of data from each detector it is difficult to gain an accurate view on the fire's progressi ...
SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology