List

Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Nanomembrane Interactive Forward Osmosis (FO) Polymers for Desalination and Remediation

    SBC: Covalent            Topic: 15a

    Supported by DOE and NSF SBIR grants for nanomembrane manufacturing and Quality Assurance, Covalent LLC is developing manufacturing methods and materials for a new class of ultra low energy, single atomic layer nanomembranes for Desalination and water purification operating at the lowest possible energy (Topic 15A). The completed membranes are expected to reduce desalination energy requirements b ...

    SBIR Phase I 2017 Department of Energy
  2. Ultra Low Energy, Low Cost Industrial Nanomembrane Substrate for Desalination, Water Purification, and Remediation.

    SBC: Covalent            Topic: 15a

    Supported by DOE and NSF SBIR grants for nanomembrane manufacturing and Quality Assurance, Covalent LLC is developing manufacturing methods for a new class of ultra low energy, single atomic layer nanomembranes for Desalination and water Purification operating at the lowest possible energy (Topic 15A). The completed membranes are expected to reduce desalination energy requirements by 66% over cur ...

    SBIR Phase I 2017 Department of Energy
  3. Broad Spectrum Electromagnetic Sensing Using Passive and Active Fraction Injection Transient Responses and the Feasibility of Uniquely Separating Fracture and Proppant Distributions

    SBC: Multi-Phase Technologies LLC            Topic: 18b

    Tracking both the extent of the induced fracture and the distribution of the proppant within the fracture are critical in understanding and optimizing the hydraulic fracture processes. Several groups are studying the use of electromagnetic methods and electrically conductive proppants to image the post-fracture proppant distribution. Interpreting these large-scale electromagnetic surveys will like ...

    SBIR Phase I 2017 Department of Energy
  4. A Field Deployable Electrochemical Sensor to Nondestructively Evaluate De-alloying in Gray Cast Iron

    SBC: MFS Technovation Corp            Topic: 29e

    Gray cast iron piping is the most common pipe material in North America. Based on the high carbon content, graphitic needles or flakes are a common feature in these alloys. As a result, these areas of super-saturated carbon will consistently establish galvanic attack of the adjacent iron matrix, especially when in the presence of most ionic liquids. The localized galvanic potentials create microsc ...

    STTR Phase I 2017 Department of Energy
  5. Biocatalytic production of precursors to lutein and zeaxanthin to address age-related macular degeneration

    SBC: ESCAZYME BIOCHEMICALS, LLC            Topic: N

    Project Summary Atrophic dry age related macular degeneration AMD is the leading cause of severe loss of vision for those over age Dietary supplements containing lutein and zeaxanthin are recommended by the NEI for those at risk of late AMD There has been a corresponding growth in demand for these two xanthophylls Lutein and zeaxanthin are currently sourced from marigolds grown mostl ...

    STTR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  6. Developing, Testing and Validating a Wearable Alcohol Biosensor

    SBC: CLINITECH, LLC            Topic: 450

    PROJECT SUMMARY This application for a Phase I SBIR award represents a collaboration between Clinitech LLC and McLean Hospital Harvard Medical School to develop a wearable biosensor for detecting alcohol in the interstitial fluid of humans who have consumed alcohol Excessive use of alcohol accounts for much of the public health burden related to alcohol use disorders including fetal ...

    SBIR Phase I 2017 Department of Health and Human ServicesNational Institutes of Health
  7. Point-of-care immunoassay for early diagnosis of pertussis

    SBC: DXDISCOVERY, INC.            Topic: R

    Project Summary Pertussis is rapidly re emerging as a serious public health threat in the United States Despite high vaccine coverage nationally annual reported cases in the U S have been increasing recently with a year high of in Moreover reported cases represent a large underestimate of pertussis infections Diagnosis of early pertussis catarrhal stage prior to paroxysmal ...

    SBIR Phase II 2016 Department of Health and Human ServicesNational Institutes of Health
  8. Multi Source E-Beam kV X-Ray Tube for Image-Guided Radiotheraphy

    SBC: TELESECURITY SCIENCES, INC.            Topic: 102

    DESCRIPTION provided by applicant This project will develop a commercial product that will enable for the first time realtime tumor tracking during radiotherapy at an attractive price point and with minimal interference with standard clinical practice The key novel technology is an optimized multi source X ray tube with focal spots that is placed below the multi leaf collimator MLC of a r ...

    SBIR Phase II 2016 Department of Health and Human ServicesNational Institutes of Health
  9. STTR Phase I: Piezoelectric Fatigue Fuse Based Wireless Sensor Network

    SBC: Metal Fatigue Solutions            Topic: EW

    The broader impact/commercial potential of this project is to establish a precedence for remote, real time assessment of the safety and serviceability of infrastructural assets through the development of a self-powered structural health monitoring system. This piezoelectric fatigue fuse (PFF) will enable the establishment of quantifiable metrics to discern the current state of life as well as proj ...

    STTR Phase I 2016 National Science Foundation
  10. Reduced Cost, Repeatable, Improved Property Washout Tooling for Composite Fabrication

    SBC: Nevada Composites, Inc.            Topic: N16A-T015

    Nevada Composites has developed Green-Aero(sm) toolinglightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to 370C (700F). Tools, whether single-sided or washout, have a composite-compatible CTE, provide tight tolerances, are reproducible, are stable to storage under ambient conditions, and are of affordable cost. ...

    STTR Phase I 2016 Department of DefenseNavy

Agency Micro-sites

US Flag An Official Website of the United States Government