You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Green, Safe, Dual-Pulse Solid Motor for CubeSat Orbit Changing

    SBC: Digital Solid State Propulsion, Inc            Topic: S302

    Small satellites such as CubeSats are in need of responsive propulsion, but are limited due to their size. Though single pulse, AP/HTPB fueled solid rocket motors exist in the market, greater mission flexibility is to be had from a motor with the capability of a second ignition in the same volume constraints. Digital Solid State Propulsion (DSSP) proposes research into the technology to not only t ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  2. Discrete Geometry Toolkit for Shape Optimization

    SBC: Optimal, LLC            Topic: A208

    Simulation-based design optimization has been steadily maturing over the past two decades, but not without its own unique and persistent challenges. The proposed project will develop a novel solution to one of the long-standing bottlenecks in simulation-based design optimization. Particularly, we will develop a flexible geometry toolkit for shape parameterization and modification as required for d ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  3. Scramjet Combustion Stability Behavior Modeling

    SBC: GLOYER-TAYLOR LABORATORIES INC            Topic: N/A

    A recent breakthrough in combustion stability analysis (UCDS) offers the means to accurately predict the combustion stability of a scramjet. This capability is very important due to the extreme scramjet operational environment, which makes cut-and-try development approaches impractical. With UCDS, it is now possible to accurately predict the scramjet pressure oscillation amplitudes, along with c ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  4. Public Rights-of-Way Assessment Instrumentation to Determine Accessibility

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    Cities must perform detailed assessments of sidewalks and streets, including curb ramps, pedestrian signals, crosswalks, street furniture, and other components to determine compliance with the Public Rights-of-Way Accessibility Guidelines. However, current assessment methods are inadequate or unreasonable due to time and resources required. The objectives of this project are to: 1) develop elect ...

    SBIR Phase I 2008 Department of Transportation
  5. Microscopic Traffic Flow Simulation Models- An Open Source Approach

    SBC: NEW GLOBAL SYSTEMS FOR INTELLIGENT TRANSPORTATION MANAGEMENT CORPORATION            Topic: 081FH5

    In the Open-source microscopic traffic simulation models project, a component based software framework is proposed to re-engineer CORISM data struture and CORISM interface. Under the architecture combing the innovative framework and the legacy CORISM, prototype of the open source traffic flow simulation models will be developed and demonstrated in the Phase I. In addition, areas identified by th ...

    SBIR Phase I 2008 Department of Transportation
  6. THE PRIMARY PURPOSE OF THIS PROJECT IS TO REDUCE THE REQUIREMENTS FOR INITIAL ALIGNMENT ACCURACY WHEN BRINGING A PAIR OF CONNECTORS TOGETHER PRIOR TO MATING THEM.

    SBC: Arbus, Inc.            Topic: N/A

    THE PRIMARY PURPOSE OF THIS PROJECT IS TO REDUCE THE REQUIREMENTS FOR INITIAL ALIGNMENT ACCURACY WHEN BRINGING A PAIR OF CONNECTORS TOGETHER PRIOR TO MATING THEM. THIS WILL BE ACCOMPLISHED BY INVESTIGATING THE USE OF A TAPERED OR CONICAL DESIGN TO INCLUDE A PRELIMINARY LATCHING FEATURE TO CAPTURE AND TO CAUSE ALIGNMENT OF A PAIR OF COMPLEMENTARY CONNECTORS. THE INVESTIGATION WILL TAKE INTO CONSIDE ...

    SBIR Phase I 1984 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government