You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. THE PRIMARY PURPOSE OF THIS PROJECT IS TO REDUCE THE REQUIREMENTS FOR INITIAL ALIGNMENT ACCURACY WHEN BRINGING A PAIR OF CONNECTORS TOGETHER PRIOR TO MATING THEM.

    SBC: Arbus, Inc.            Topic: N/A

    THE PRIMARY PURPOSE OF THIS PROJECT IS TO REDUCE THE REQUIREMENTS FOR INITIAL ALIGNMENT ACCURACY WHEN BRINGING A PAIR OF CONNECTORS TOGETHER PRIOR TO MATING THEM. THIS WILL BE ACCOMPLISHED BY INVESTIGATING THE USE OF A TAPERED OR CONICAL DESIGN TO INCLUDE A PRELIMINARY LATCHING FEATURE TO CAPTURE AND TO CAUSE ALIGNMENT OF A PAIR OF COMPLEMENTARY CONNECTORS. THE INVESTIGATION WILL TAKE INTO CONSIDE ...

    SBIR Phase I 1984 National Aeronautics and Space Administration
  2. A High Reliability Frequency Stabilized Semiconductor Laser Source

    SBC: Princeton Optronics            Topic: S101

    NASA needs high stability laser source of 1W output power for Lidar applications. Princeton Optronics has developed ultra-stable, narrow linewidth diode pumped solid state lasers using stable packaging and high performance locker. We have also developed high power Vertical Cavity Surface Emitting Laser (VCSEL) semiconductor laser sources. We propose to develop a high reliability master oscillator ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  3. Miniature, Rugged, Pulsed Laser Source for LIDAR Application

    SBC: Princeton Optronics            Topic: S101

    Princeton Optronics proposes to develop a high energy pulsed laser source based on a novel approach. The approach consists of a technique to combine a large number of diode pumped solid state lasers. The resulting laser can be packaged in a very small package. We will develop the laser and package it into a laser welded package which can be space qualified. We can achieve 50mJ or higher level of e ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  4. Novel Photonic RF Spectrometer

    SBC: SPECTRUM MAGNETICS LLC            Topic: S104

    Leveraging on recent breakthroughs in broadband photonic devices and components for RF and microwave applications, SML proposes a new type of broadband microwave spectrometer with performance and affordability that were not attainable before. The photonic microwave spectrometer overcomes the constrains associated with microwave electronics, linearly and simultaneously offering 6-18 GHz (potential ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  5. Enhanced Membrane System for Recovery of Water from Gas-Liquid Mixtures

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: H303

    Gas-Liquid separation is an acute microgravity problem. Existing devices use centrifugal motion on microporous membranes to separate the two phases. Centrifugal devices consume electricity and are prone to failure. The microporous membranes easily foul and have significant water loss. Novel membrane devices are proposed. Membranes can simultaneously disengage gases from gas-liquid dispersion and d ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  6. R3DO: A Plastic Recycling System For Creating 3D Printer Feedstock On-Orbit

    SBC: Made In Space, Inc.            Topic: H1001

    An automated in-space recycling system for 3D printer feedstock will provide game-changing resupply benefits including but not limited to launch mass reduction, mission reliability increases, and decreased reliance on resupply from Earth. To bring these benefits to ISS in the near term, Made In Space proposes the further development of their unique recycling system, called R3DO, for transforming ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  7. A Green, Safe, Dual-Pulse Solid Motor for CubeSat Orbit Changing

    SBC: Digital Solid State Propulsion, Inc            Topic: S302

    Small satellites such as CubeSats are in need of responsive propulsion, but are limited due to their size. Though single pulse, AP/HTPB fueled solid rocket motors exist in the market, greater mission flexibility is to be had from a motor with the capability of a second ignition in the same volume constraints. Digital Solid State Propulsion (DSSP) proposes research into the technology to not only t ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  8. Atomic Interferometry

    SBC: Princeton Optronics            Topic: S109

    Vertical cavity surface emitting lasers (VCSELs) is a new technology which can be used for developing high performance laser components for atom-based sensors technology. The narrow linewidth of VCSEL emission combined with good polarization extinction ratio and large spacing between the longitudinal modes, which makes them relatively immune to mode hopping, and their high reliability make them un ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government