You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Antibodies for the Detection of the Toxin Anatoxin-by Immunoassay

    SBC: Abraxis, Inc.            Topic: N/A

    Fresh water cyanobacteria harmful algal blooms (HAB), have potentially many adverse environmental impacts. For instance, bloom mats of filamentous algae are believed to reduce ambient light levels below those required for submerged aquatic vegetation to survive. Blue-green algae, form blooms that make a surface scum and have been associated with low levels of dissolved oxygen that can be lethal ...

    SBIR Phase I 2006 Environmental Protection Agency
  2. Development of Monoclonal and Polyclonal Antibodies Suitable for a Commercial Perfluorooctanoic Acid (PFOA) ELISA

    SBC: Abraxis, Inc.            Topic: N/A

    Perfluorooctanoic acid (PFOA) is a synthetic chemical which does not occur naturally in the environment,it has been used in many commercial applications. A number of scientific findings since the late 1990's have elevated PFOAs to the category of great environmental concern beacuse of its persistence, and the potential for bioaccumulation and biomagnification. Effective environmental and health pr ...

    SBIR Phase I 2006 Department of Agriculture
  3. Improved Manufacturing Technologies for Polymer Matrix Composite Engine Components

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: AF06115

    This proposal addresses the development and use of lightweight, low thermal-capacity reformable tooling materials for high-temperature composite processing evaluation, parts prototyping, trial production and full-rate production of PMC engine components. The weight-saving promise of high-temperature polymer matrix composites (PMCs) for engine components is offset by the very high costs of parts m ...

    SBIR Phase I 2006 Department of DefenseAir Force
  4. Seamless Non-Line-Of-Sight Communications for Urban Warfare

    SBC: ADAPTIVE DIGITAL TECHNOLOGIES            Topic: AF05T022

    This project will investigate candidate space-time coding schemes to be incorporated in a multiple-input multiple output two-way communication system that operates within an urban warfare environment. The main objective is to increase channel capacity to achieve high-quality video transmission using narrow signal bandwidths, typically deployed for voice channels. The investigation will determine t ...

    STTR Phase I 2006 Department of DefenseAir Force
  5. Vinyl Ester Compatible High-Modulus Fiber System for Composite Laminates

    SBC: Adherent Technologies, Inc.            Topic: N04094

    An aqueous-based finish (sizing) was developed in Phase I to improve the carbon/vinyl ester interfacial bond. The finish is composed of a reactive coupling agent, a low viscosity vinyl ester resin, a free radical inhibitor, and a surfactant. The reactive finishes substantially improved the carbon/vinyl ester interface compared to unsized or FOE sized materials. Failure mode analysis shows that ...

    SBIR Phase II 2006 Department of DefenseNavy
  6. High Temperature Finishes/Sizings for Polyimide Matrix Composites

    SBC: Adherent Technologies, Inc.            Topic: N04251

    New high-temperature sizings are needed to improve the properties and durability of carbon/polyimide composites. Compatibility with weaving and braiding operations and improved wetting during prepregging or resin infusing polyimide resin is also needed. Achieving these characteristics will result in reducing life cycle costs for jet engine composites through better property translation, reduced ...

    SBIR Phase II 2006 Department of DefenseNavy
  7. Finishing Process to Improve Interfacial Bonding in SiC/BMI Composites

    SBC: Adherent Technologies, Inc.            Topic: N05025

    High-temperature (HT) polymer matrix composites (PMCs) are desired for many aerospace and military applications. Silicon carbide (SiC) fibers provide a potentially attractive reinforcement for HT PMCs for applications ranging from propulsion systems to structures for the orbiting space plane. The sizings routinely added to commercial SiC fibers are not compatible with the new HT matrix resins. ...

    SBIR Phase II 2006 Department of DefenseNavy
  8. Surface Modification of Exfoliated Graphite Nano-Reinforcements

    SBC: Adherent Technologies, Inc.            Topic: A205

    Phase I results showed that two surface treatments, oxidative plasma and reactive finishes, are effective means of modifying the surface chemistry of exfoliated graphite nanoflakes. The surface modifications provide a more compatible surface energy for dispersion in polymers and create well-bonded interfaces with the polymer matrix. In order to be cost effective for NASA and commercial applicati ...

    SBIR Phase II 2006 National Aeronautics and Space Administration
  9. Light-Curing Structural Tape for In-Space Repair

    SBC: Adherent Technologies, Inc.            Topic: X1203

    NASA has numerous requirements for in-space repair capabilities to aid future missions beyond earth orbit. A subset of these requirements is adhesive patch materials that provide permanent or temporary repair of a wide variety of surfaces with minimal surface preparation. Prior work on light (UV and visible) curing composite matrix resins for rigidizing inflatable spacecraft shows that there is ...

    SBIR Phase I 2006 National Aeronautics and Space Administration
  10. Phosphorous-Containing Epoxy Resins for Room Temperature VARTM

    SBC: Adherent Technologies, Inc.            Topic: N06T017

    The Navy intends to start using a significant quantity of composite structures in surface ship construction in an effort to decrease costs as well as to reduce the visibility of the ships to radar. The large size of the target structures necessitates the use of low temperature, non-autoclave processing techniques such as Vacuum Assisted Resin Transfer Molding (VARTM). In the recent past, most m ...

    STTR Phase I 2006 Department of DefenseNavy
US Flag An Official Website of the United States Government