You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique

    SBC: T.E.A.M., INC.            Topic: H701

    Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating a potential weak spots at the panel joints. ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  2. Advancing High Energy Lithium-Sulfur Batteries

    SBC: Yardney Technical Products, Inc.            Topic: Z102

    Lithium-Ion batteries have been a main source of energy for many aerospace applications over the past decade. Future space missions are facing a number of challenging requirements, including significant increase in specific energy, approaching 500 Wh/kg, and energy density of 700 Wh/l at cell level. Compared to state-of-the-art technology today, a reduction in mass and volume are necessary, along ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  3. A Green, Safe, Dual-Pulse Solid Motor for CubeSat Orbit Changing

    SBC: Digital Solid State Propulsion, Inc            Topic: S302

    Small satellites such as CubeSats are in need of responsive propulsion, but are limited due to their size. Though single pulse, AP/HTPB fueled solid rocket motors exist in the market, greater mission flexibility is to be had from a motor with the capability of a second ignition in the same volume constraints. Digital Solid State Propulsion (DSSP) proposes research into the technology to not only t ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  4. Public Rights-of-Way Assessment Instrumentation to Determine Accessibility

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    Cities must perform detailed assessments of sidewalks and streets, including curb ramps, pedestrian signals, crosswalks, street furniture, and other components to determine compliance with the Public Rights-of-Way Accessibility Guidelines. However, current assessment methods are inadequate or unreasonable due to time and resources required. The objectives of this project are to: 1) develop elect ...

    SBIR Phase I 2008 Department of Transportation
  5. DGPS-Based Trilateration Positioning Receiver

    SBC: Swaszek Peter            Topic: 07FH1

    Positioning and navigation have become a mainstay of everyday life in the U.S.; applications of interest include navigation of vehicles of all kinds, infrastructure mapping, and safety of life systems. Many of these recent applications have become possible through the GPS. With the recognized vulnerabilities of GPS, it is evident that equivalent backup systems must be developed. One possible so ...

    SBIR Phase I 2008 Department of Transportation
  6. Calibration of an Autonomous Navigation System Using GPS and Machine Learning

    SBC: Sierra Nevada Corporation            Topic: N/A

    GPS receivers are heavily used in aviation for both visual and instrument flights. There is a need for a backup system so that enroute and non-precision approaches can be flown without reliance on ground based systems should GPS be unavailable. We propose to use barometric pressure, airspeed, low-cost inertial sensors, three-axis magnetometer along with high-fidelity geomagnetic models, and an ...

    SBIR Phase I 2001 Department of Transportation
  7. THE PRIMARY PURPOSE OF THIS PROJECT IS TO REDUCE THE REQUIREMENTS FOR INITIAL ALIGNMENT ACCURACY WHEN BRINGING A PAIR OF CONNECTORS TOGETHER PRIOR TO MATING THEM.

    SBC: Arbus, Inc.            Topic: N/A

    THE PRIMARY PURPOSE OF THIS PROJECT IS TO REDUCE THE REQUIREMENTS FOR INITIAL ALIGNMENT ACCURACY WHEN BRINGING A PAIR OF CONNECTORS TOGETHER PRIOR TO MATING THEM. THIS WILL BE ACCOMPLISHED BY INVESTIGATING THE USE OF A TAPERED OR CONICAL DESIGN TO INCLUDE A PRELIMINARY LATCHING FEATURE TO CAPTURE AND TO CAUSE ALIGNMENT OF A PAIR OF COMPLEMENTARY CONNECTORS. THE INVESTIGATION WILL TAKE INTO CONSIDE ...

    SBIR Phase I 1984 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government