You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Accurate Position Location Information in GPS-Denied Forests and Jungle Environments

    SBC: CREARE LLC            Topic: A16031

    Maintaining accurate position location information (PLI) during operational missions is a critical requirement for the dismounted soldier.This requirement is unmet in heavily forested and jungle environments where GPS reception is unavailable due to dense canopy cover.In such environments, soldiers must determine their location by using visual landmarks, or by seeking open clearings where GPS rece ...

    SBIR Phase I 2016 Department of DefenseArmy
  2. Adaptable Pediatric Neurocognitive Assessment

    SBC: CREARE LLC            Topic: NICHD

    DESCRIPTION provided by applicant Millions of children around the globe are afflicted with conditions that can alter neuropsychological development including human immunodeficiency virus HIV traumatic brain injury TBI cerebral malaria and a host of other developmental and acquired diseases and disorders Early assessment and intervention are critical in overcoming cognitive and deve ...

    SBIR Phase I 2016 Department of Health and Human ServicesNational Institutes of Health
  3. Advanced Carbon Nanotube Flywheel for Pulsed Power Applications

    SBC: CREARE LLC            Topic: N152118

    The advancement of systems requiring high power (megawatt level) in a short amount of time (seconds to minutes) is increasing, and there is currently no reliable energy storage and release system to complement these technologies on the Navys ships. Traditional flywheels are heavy with low tip speeds and often have to be built in place. Creare proposes an advanced carbon nanotube (CNT) flywheel for ...

    SBIR Phase I 2016 Department of DefenseNavy
  4. A High Efficiency Cryocooler for In-Space Cryogenic Propellant Storage

    SBC: CREARE LLC            Topic: H204

    NASA is considering multiple missions involving long-term cryogen storage in space. Liquid hydrogen and liquid oxygen are the typical cryogens as they provide the highest specific impulse of practical chemical propellants. These cryogens are stored at temperatures of nominally 20 K for hydrogen and 90 K for oxygen. Due to the large size of these tanks, refrigeration loads to maintain zero-boil- ...

    SBIR Phase I 2016 National Aeronautics and Space Administration
  5. A 10 K Multistage Cryocooler with Very Low Vibration

    SBC: CREARE LLC            Topic: S109

    Advanced space-borne instruments require cooling at temperatures of 10 K and below. These coolers will be used for as upper-stage cryocoolers for sub-Kelvin cryocoolers and instruments or the primary cooler for electro-optical instruments. Cooling loads for these detectors will range from 0.25 W to 1.0 W at the primary load site, with additional loads at higher temperatures for other subsystems. ...

    SBIR Phase I 2016 National Aeronautics and Space Administration
  6. An Efficient, Reliable, Vibration-Free Refrigerant Pump for Space Applications

    SBC: CREARE LLC            Topic: S307

    NASA's future remote sensing science missions require advanced thermal management technologies to provide effective cooling for multiple instruments and reject heat through multiple radiators. Two-phase pumped loops are an ideal solution for these applications. A critical need for these pumped loops is a refrigerant pump that reliably circulates very slightly subcooled liquid refrigerant in the ...

    SBIR Phase I 2016 National Aeronautics and Space Administration
  7. A Novel System for Ship Structure Crack Arrest and Repair

    SBC: CREARE LLC            Topic: N161069

    The new high-speed aluminum vessels in use by the Navy are designed to preclude crack initiation; however, experience with aluminum structures has demonstrated that plate cracking will occur and grow at an accelerated pace compared to other metals. Permanent repairs are expensive, time consuming, and hence, not feasible for the shipboard environment. The processes that represent the state-of-the-a ...

    SBIR Phase I 2016 Department of DefenseNavy
  8. A Reconfigurable Machining Center for Depot Productivity Enhancement

    SBC: CREARE LLC            Topic: AF161019

    Current depot-level manufacturing systems are not responsive to changing requirements and flexible specifications.The serial arrangement of individual work cells results in a lengthy timeline to complete the critically needed part; thus, critical assets are out of service for an extended period of time.The Reconfigurable Manufacturing System (RMS) is a new approach used by mass manufacturers to re ...

    SBIR Phase I 2016 Department of DefenseAir Force
  9. A Small Passively Cooled Inverter

    SBC: CREARE LLC            Topic: A16088

    While many DC AC inverters are available on the market, inefficiency and legacy semiconductor technologies require active thermal management and large package sizes.Creare proposes to develop a very small and passively cooled inverter that reduces size while improving efficiency and reliability.During Phase I, we will develop a conceptual design and demonstrate key aspects with targeted laboratory ...

    SBIR Phase I 2016 Department of DefenseArmy
  10. Automated Blade Repair System

    SBC: CREARE LLC            Topic: AF161117

    ABSTRACT: High pressure compressor blades are subject to damage on the leading and trailing edges of the blades due to foreign objects.Repair of this damage is currently performed manually using grinding to blend out the damaged regions.Reliance on manual grinding operations requires highly skilled operators, is time consuming, and does not permit collection of data characterizing the nature of th ...

    SBIR Phase I 2016 Department of DefenseAir Force
US Flag An Official Website of the United States Government