You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics

    SBC: Orora Design Technologies, Inc.            Topic: DTRA07005

    Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  2. Novel Methods to Measure Penetrator Dynamics in Multi-Layer Geometries

    SBC: Thornton Tomasetti, Inc.            Topic: DTRA07011

    In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  3. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: Modumetal, Inc.            Topic: DLA07001

    The purpose of this SBIR effort is to commercialize an innovative method for the production of Modumetal™ discrete parts. The Phase I effort has demonstrated: (1) The low-cost production of monolithic parts of various scales using a net-shape (additive) manufacturing process, (2) An new production process in which cost and production volume are decoupled, and (3) Significant improvement in pr ...

    SBIR Phase II 2008 Department of DefenseDefense Logistics Agency
  4. Enhanced Stability and Penetration Depth of Deep Earth Penetrators

    SBC: GENERAL SCIENCES INC            Topic: DTRA06009

    DTRA and other DoD agencies are currently seeking earth penetrators with higher efficiency for reaching deeply buried targets. Current penetrator materials and designs suffer from high levels of frictional drag, unbalanced resistance due to lateral forces and localized melting of the warhead leading to shape change and further instability. General Sciences, Inc. (GSI) has developed a method for en ...

    SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency
  5. Engineering Models for Damage to Structural Components Subjected to Internal Blast Loading

    SBC: Thornton Tomasetti, Inc.            Topic: DTRA08006

    Predicting the response of building components to internal detonations is more complex than the corresponding task for external loads because of the more complex loading waveforms which include multiple reflections in the shock phase followed by a long duration pseudostatic loading that depends upon room venting. Add the possibility of additional impulsive loading from primary debris. We propose t ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  6. Agent Defeat using a DWA Accelerator

    SBC: Brookhaven Technology Group, Inc.            Topic: DTRA08008

    A new type of compact induction accelerator currently under development at the Lawrence Livermore National Laboratory (LLNL) promises to increase the average accelerating gradient by at least an order of magnitude over that of existing induction machines. The machine is based on the use of high gradient vacuum insulators and advanced dielectric materials and switches. The system, called the Diel ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  7. Portable Time of Flight Mass Spectrometer for Nuclear Forensics

    SBC: CREARE LLC            Topic: DTRA08004

    Analysis of nuclear material samples in the field has many advantages over laboratory analysis. Laboratory analyses can be slow, involve increased expense, lead to additional waste generation and disposal problems, and may introduce errors due to sample degradation or mishandling. In situ analysis mitigates all of these problems. The specific aim of this project is the development of a truly por ...

    SBIR Phase I 2008 Department of DefenseDefense Threat Reduction Agency
  8. Low Noise, InGaAs Dual Photodiodes for Precise Timing

    SBC: DISCOVERY SEMICONDUCTORS, INC.            Topic: N/A

    Conversion of highly stable optical clocks into electrical clocks through photodetection introduces excess phase noise and degrades the frequency stability by two to three orders of magnitude.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  9. Extended Refreshable Tactile Graphic Display (with Linear Actuation Array)

    SBC: E L I A Life Technology Inc            Topic: N/A

    New innovative technology for the visually impaired has been developed by NIST. If commercialized, it would provide refreshable tactile graphical information to the visually impaired, enabling them to compete on a more equal footing in the workplace and the education system.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  10. Innovative Fire Measurements Using Thermal Imaging

    SBC: CRITICAL IMAGING, LLC            Topic: N/A

    The most practical arrangement for investigating moving fires within a restricted space is to use a high- resolution stand off technique. One such method that fits this description is the use of a staring infrared (IR) sensing device (i.e. imager).

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government