You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Reverse Engineering TDPs for Development of Alternate Sources of Supply for DLA NSNs
SBC: PARTS LIFE INC Topic: DLA171002Parts Life Incorporated (PLI) has completed the SAR Process and Reverse Engineering Risk Avoidance Process (RERAP) to demonstrate its ability to replicate the Seal Asy Hub, 2530-00-736-4672 through quality management programs. The DLA will have a competitive approved source for procurement of the Seal by utilizing PLI's method of manufacturing. The Materials, Equipment, Management, Measurements, E ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency -
Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs
SBC: Brighton Cromwell, LLC Topic: DLA171002This proposal introduces an approach from Brighton Cromwell to Improve product availability and increase competition through the development of Small Business eligible manufacturing utilizing the DLA’s Land and Maritime (L&M) Limited Source National Stock Number (NSN) List. The list contains NSNs with an Annual Demand Value (ADV) >$10K currently sourced with only 1-2 manufacturers. We are offeri ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency -
Reverse Engineering Technical Data Packages for Development of Alternate Sources of Supply for DLA NSNs
SBC: Brighton Cromwell, LLC Topic: DLA171002In Phase 1, we obtained samples through the RPPOB process, performed due diligence, reverse engineered, created engineering drawings, performed positive material identifications, assigned proper quality control documentation, and all pertinent technical activities to complete a technical data package in accordance with the DLA requirements and submit a SAR for evaluation and acceptance. In this pr ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency -
Tamper Resistant/Anti-Counterfeit Package Labeling
SBC: UTILITY DEVELOPMENT CORP Topic: DLA163003The objective will becontinue the progress made in Phase I program for anti-counterfeiting label/tape solutions which are easy to deploy through the existing DLA supply chain. We willdemonstratethe technologies withtamper and counterfeit detection capabilities. A comprehensive report will be submitted that will include the results of the demonstration, describes how the technology might be impleme ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency -
The Characterization and Mitigation of Single Event Effects in Ultra-Deep Submicron (< 90nm) Microelectronics
SBC: Orora Design Technologies, Inc. Topic: DTRA07005Orora Design Technologies proposes to develop electronic design automation (EDA) tools employing minimally invasive circuit design-based methods to mitigate single event effects (SEEs) for next generation Ultra-DSM CMOS (
SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency -
Novel Methods to Measure Penetrator Dynamics in Multi-Layer Geometries
SBC: Thornton Tomasetti, Inc. Topic: DTRA07011In Phase I of this effort we analyzed the structural response of a BLU 109 during typical penetration events. Based on these finite element results, we proposed and demsonstrated a simple robust concept for a passive penetrator sensor that identifies the material being penetrated and also correlates strongly with its underground trajectory. Such a sensor would obviously provide valuable informatio ...
SBIR Phase II 2008 Department of DefenseDefense Threat Reduction Agency -
Advanced Technologies for Discrete-Parts Manufacturing
SBC: Modumetal, Inc. Topic: DLA07001The purpose of this SBIR effort is to commercialize an innovative method for the production of Modumetal™ discrete parts. The Phase I effort has demonstrated: (1) The low-cost production of monolithic parts of various scales using a net-shape (additive) manufacturing process, (2) An new production process in which cost and production volume are decoupled, and (3) Significant improvement in pr ...
SBIR Phase II 2008 Department of DefenseDefense Logistics Agency -
Reverse Engineering and Source Approval for Aerospace Components
SBC: MENTIS SCIENCES INC Topic: DLA171002Mentis Sciences Inc. proposes to develop Technical Data Packages and generate Source Approval Requests for critically needed components for the Air Launched Cruise Missile engine platform, the F107, which is no longer supported by the OEM. The supply of some spare parts may be exhausted as early as Oct 2018, on a system that is scheduled to remain in service through at least 2030.Mentis will work ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency -
SOURCE APPROVAL REQUEST (SAR) FOR MULTIPLE ITEMS and First Article
SBC: NDI ENGINEERING COMPANY Topic: DLA171002This proposal seeks NDI Engineering Company (CAGE code: 4X596) to become approved as apotential source of supply to DLA for the MK 2 Nose Gear Launch Shaft Assembly, NAVAIRpart number 511224-1; Shaft, Shouldered, NSN 3040-00-224-9019. In Phase I, NDIEngineering Company submitted one a Source Approval Request (SAR) for the manufacturingof the Shaft Assembly defined as NAVAIR part number 511224-1. I ...
SBIR Phase II 2018 Department of DefenseDefense Logistics Agency