You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
A COMPACT, LOW-POWER SUBMERSIBLE CHEMICAL ANALYZER PAYLOAD FOR AUTONOMOUS UNDERWATER VEHICLES
SBC: SUBCHEM SYSTEMS, INC. Topic: N03223SubChem Systems proposes to design and develop a compact, low power submersible chemical analyzer payload for deployment on autonomous underwater vehicles (AUV). The primary objective of this proposal is to demonstrate the feasibility of developing a Micro AUV Ready Chemical (MARCHEM) Analyzer. This device will be capable of performing real-time, rapid response measurements of trace chemicals in ...
SBIR Phase I 2004 Department of DefenseNavy -
A Compact Submersible Trace Chemical Analyzer for Tracking Plumes of Chemical Explosives with Autonomous Underwater Vehicles
SBC: SUBCHEM SYSTEMS, INC. Topic: N/A"This SBIR Phase II project involves the development, testing and integration of a submersible solvent extraction module (SubSEM), tested in an SBIR Phase I feasibility study, with a miniature optical analytical detection system for the continuous sampling,pre-concentration, and chemical analysis of TNT present at ultra-trace concentration levels in seawater. The integrated underwater sampling and ...
SBIR Phase II 2002 Department of DefenseNavy -
Acoustically Transparent Mid-Frequency SONAR Projector
SBC: Btech Acoustics, LLC Topic: N201066Develop a concept for an innovative acoustically transparent mid-frequency SONAR projector. Demonstrate that the concept can feasibly meet requirements in the Description through modeling and simulation or analysis. The Phase I Option, if exercised, shall include the initial system specifications, models and capabilities description to build a prototype solution in Phase II
SBIR Phase I 2020 Department of DefenseNavy -
Acoustic Bandgap Materials and Devices
SBC: LASER FARE ADVANCED TECHNOLOGY GROUP Topic: N/AN/A
SBIR Phase I 1999 Department of DefenseDefense Advanced Research Projects Agency -
Acoustic Band Gap Materials and Devices
SBC: LASER FARE ADVANCED TECHNOLOGY GROUP Topic: N/ALaser Fare, working with Triton Systems, the Naval Undersea Weapons Center, and the Electric Boat Division of General Dynamics, recently completed the DARPA
SBIR Phase II 2001 Department of DefenseDefense Advanced Research Projects Agency -
Acoustic Band Gap Materials and Devices
SBC: LASER FARE ADVANCED TECHNOLOGY GROUP Topic: N/ALaser Fare, working with Triton Systems, the Naval Undersea Weapons Center, and the Electric Boat Division of General Dynamics, recently completed the DARPA
SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency -
Acoustic Buoy Release for Locating Underwater Instruments
SBC: KVH INDUSTRIES, INC. Topic: N/AKVH Industries proposes to design and demonstrate a low cost short range acoustic buoy release system designed to locate and retrieve underwater instruments. The proposed design effort will address the problems of search rate, identification, homing, slant range measurement, localization and buoy acknowledgement. The focus of the Phase I effort will be optimization of correct response to address a ...
SBIR Phase II 1993 Department of DefenseArmy -
Acoustic Buoy Release for Locating Underwater Instruments
SBC: KVH INDUSTRIES, INC. Topic: N/AN/A
SBIR Phase I 1992 Department of DefenseArmy -
ActiveApproach: On-orbit inspection of space-based targets
SBC: VISION SYSTEMS INC Topic: AF21STCSO1Accurate 3D models are vital for the inspection and characterization of orbiting spacecraft. 3D models of a target spacecraft can be generated from a set of images captured by an approaching platform, but the accuracy and completeness of the generated 3D model is highly dependent on the geometry of the captured viewpoints and illumination conditions; if navigation is planned without consideration ...
STTR Phase I 2022 Department of DefenseAir Force -
Active RF Circulators
SBC: Applied Radar, Inc. Topic: SB052016Applied Radar Inc. proposes the development of active MMIC-based circulators in order to achieve high isolation between transmit and receive paths for simultaneous transmit and receive (STAR) phased-array radar system architectures. This technology will enable increased persistence in intelligence, surveillance and reconnaissance (ISR) systems and allow multiple simultaneous radar modes including ...
SBIR Phase I 2005 Department of DefenseDefense Advanced Research Projects Agency