You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Real Time Wireless Network for Avionics Applications

    SBC: Epsilon Lambda Electronics Corp.            Topic: N05142

    The US Navy in this Topic identified the need to develop and demonstrate innovative technologies that leverage existing and emerging commercial real-time wireless circuitry by upconversion of frequency to 60 GHz (V-band) for short range, high security applications. This topic was originated by the NavAir F/A-18 Program Office to research the possibility of using a millimeter wave wireless local a ...

    SBIR Phase II 2007 Department of DefenseNavy
  2. Autonomous Operation of UAVs from USVs

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: N05055

    Accurate Automation Corporation (AAC) proposes a unique Unmanned Aerial Vehicle Launch and Recovery system for a U.S. Navy Unmanned Surface Vessel (USV). AAC proposes an innovative concept for repeatedly stowing, launching, guiding, recovering, and restoring one or more UAVs without sacrificing operational tempo. While UAV’s have been used extensively in-theater to support the troops, USVs are ...

    SBIR Phase II 2007 Department of DefenseNavy
  3. Digital Electronics Health Prognosis

    SBC: VEXTEC Corporation            Topic: N05093

    A comprehensive Air System PHM approach will be developed for avionics digital circuits. As a mission is flown, temperature and vibration data indicate the stresses imposed on the electronics. This technology translates global stresses onto individual circuit board components and even the materials that make up those components. Based on VEXTEC proprietary material degradation physics modeling com ...

    SBIR Phase II 2007 Department of DefenseNavy
  4. Multifunctional, Low-Cost, Inorganic Seal Coatings for Radomes

    SBC: APPLIED THIN FILMS, INC            Topic: N05124

    The US Navy and other Department of Defense agencies are facing an urgent need for new and improved radome materials for advanced missile systems. High temperature sealants on radome structures of advanced missile systems is a critical need, since ingress of moisture during missile storage can degrade the electronic components housed within the missile radome. Inorganic coatings are preferred for ...

    SBIR Phase II 2007 Department of DefenseNavy
  5. High Power Quantum Cascade Lasers for Infrared Countermeasure Applications

    SBC: MP Technologies, LLC            Topic: N06014

    Current infrared countermeasure (IRCM) systems are limited by the size and weight of their jamming transmitter. Laser systems based on nonlinear conversion are intrinsically large and inefficient compared to diode lasers. For current, as well as future, countermeasure systems, mid-infrared diode lasers need to be produced which can satisfy the power needs for IRCM while minimizing the system siz ...

    SBIR Phase II 2007 Department of DefenseNavy
  6. Qualitative Network Visualization for Improved Situational Awareness

    SBC: VISUALYTICS, LLC            Topic: OSD05NC8

    Conventional network visualization systems are primarily focused on showing networks with fixed topologies and do not scale well for the types of dynamic ad-hoc mobile networks that are increasingly prevalent in the net-centric military. Visualytics is developing a suite of next-generation visualization techniques that are specialized for showing this type of network with constantly evolving topo ...

    SBIR Phase II 2007 Department of DefenseNavy
  7. Processing Methods to Fabricate Reliable Device Elements of PMN-PT Piezoelectric Single Crystals

    SBC: H. C. Materials Corporation            Topic: N06083

    The reliability of PMN-PT piezo crystal elements operating under high drive is vitally important for Navy sonar transducers and other high-power acoustic devices. The goals of the proposed tasks are to enhance the reliability of the PMN-PT crystal elements by resolving the challenges that exist in the machining, processing and assembling of PMN-PT crystal elements, and to make it ready for the uti ...

    SBIR Phase II 2007 Department of DefenseNavy
  8. Sonobuoy – Electronic Function Selector (EFS) Replacement

    SBC: SEACORP, LLC            Topic: N06010

    Present sonobuoys require manual selection and verification of functions such as RF Channel, Depth, etc. with selection and verification impossible while the sonobuoys are loaded in the launcher or in the storage racks onboard. The capability to select and verify functions while the sonobuoys are loaded in the launcher or in onboard storage racks would save time and permit more operational flexib ...

    SBIR Phase II 2007 Department of DefenseNavy
  9. New Material Compositions That Expand the Operating Domain of Piezoelectric Single Crystals

    SBC: H. C. Materials Corporation            Topic: N06T034

    High-drive applications for new PMN-PT piezoelectric crystals require additional bias fields due to the relatively low coercivity (EC, ~ 2 kV/cm). However, this complicates the design of Navy devices, increases the cost, and makes the devices more susceptible to electrical failure. Thus, the goals of the proposed project are to increase EC, and extend the thermal stability of PMN-PT based transdu ...

    STTR Phase II 2007 Department of DefenseNavy
  10. Computational Materials Design of a High-Strength Copper Alloy for Replacing BeCu Alloys

    SBC: QUESTEK INNOVATIONS LLC            Topic: N05009

    The overall objective of this SBIR program is to design, develop, and qualify an environmentally-benign, Be-free replacement alloy for BeCu bearing alloy AMS 4534 that is used in sliding, load-bearing components of the Joint Strike Fighter (JSF) using QuesTek’s computational materials design technology. Due to their low inherent coefficient of sliding friction, high-strength BeCu alloys are wide ...

    SBIR Phase II 2007 Department of DefenseNavy
US Flag An Official Website of the United States Government