You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. On Demand Oil Supply

    SBC: Turnkey Design Services, LLC            Topic: N112096

    State-of-the-art oil pumps in aircraft engines deliver a volumetric flow rate proportional to the rotor speed of the high-pressure engine core, which drive the pump via the engine gearbox. In emerging aircraft platforms, the fuel and oil systems are used to cool a variety of engine and airframe systems. The undesirable oil heating accumulates and reduces the fuels heat-sink reserve at critical fli ...

    SBIR Phase II 2013 Department of DefenseNavy
  2. Robotic Eddy Current Condenser Inspection Equipment Capability

    SBC: WOLF TECHNICAL SERVICES INC            Topic: N111059

    The purpose of this multi-phase program is to develop an autonomous system that is capable of aligning probes for eddy current inspections on steam condensers. The system aligns the eddy current inspection probe over the appropriate condenser tube based on a provided positional information and visually signals the operator to continue with inspection following a prior obstruction detection check. ...

    SBIR Phase II 2013 Department of DefenseNavy
  3. High Density, High Efficiency Electrical Power Generation

    SBC: PC KRAUSE & ASSOCIATES INC            Topic: N103207

    State-of-the-art electrical starter/generator (ES/G) systems have become increasingly complex in design and integration due to significant power-demand increase in more electric aircraft initiatives such as the Joint Strike Fighter (JSF). They must provide high performance and high efficiency with limited active cooling availability. In order to satisfy the power demands and harsher environments a ...

    SBIR Phase II 2013 Department of DefenseNavy
  4. Tunable Bandstop Filters for Suppression of Co-site Interference and Jamming Sources

    SBC: INDIANA MICROELECTRONICS, LLC            Topic: N11AT016

    This project will develop tunable notch filter for the mitigation of co-site interference and jamming sources. The novel filter technology explored in the Phase I program has displayed excellent potential to provide wide tuning capability, low out-of-band insertion losses, deep notch depths, compact form factors and low power consumption. Furthermore, by using novel MEMS tuning membranes, high fil ...

    STTR Phase II 2013 Department of DefenseNavy
  5. High Load Roller Bearing (HLRB)

    SBC: HY-TEK MANUFACTURING CO., INC.            Topic: N111047

    HMCs approach to Phase I HLRB roller bearing design was to achieve separation of the radial and axial functions of the bearing so as to enable axial bearing movement independent of bearing rotation. HMCs rationale for this approach was that the delineation of axial and radial loads will ensure that each load bearing member can withstand the static and dynamic force vectors to which it will be expo ...

    SBIR Phase II 2013 Department of DefenseNavy
  6. Computational Design and Development of Advanced Stainless Steel for Aircraft Engine and Lift Fan Gearbox Bearings

    SBC: QUESTEK INNOVATIONS LLC            Topic: N121022

    The overall goal of the Phase II program is to move QuesTeks new stainless bearing steel alloy development efforts from the Phase I prototype scale, to intermediate- and full-scale alloy production. The Phase II program will culminate with a demonstration of the new alloys properties at full (production) scale, with data suitable for alloy qualification and specification development.

    SBIR Phase II 2013 Department of DefenseNavy
  7. Sonobuoy Electronic Function Selector (EFS) Replacement

    SBC: SEACORP, LLC            Topic: N06010

    Present sonobuoys allow for the selection of functions such as RF Channel, Depth, etc. by use of a single selector button and LED display along with a second button used for verification located on the side of the sonobuoy. Selection or verification requires access to the buttons and cannot be accomplished once the sonobuoy is loaded into the launcher. The capability to select and verify functions ...

    SBIR Phase II 2013 Department of DefenseNavy
  8. Autonomous Maintenance and Health Monitoring of Rechargeable Batteries

    SBC: TECHSHOT, INC.            Topic: N102107

    Rechargeable batteries self discharge while in storage, and when allowed to remain at an extremely low state of charge for a long period of time, can be damaged permanently and then must be discarded. The USMC finds it far too costly and impractical to perform manual maintenance recharges every 3 to 6 months on the millions of rechargeable batteries in its inventory. In response to their requireme ...

    SBIR Phase II 2013 Department of DefenseNavy
  9. Modular Anthropomorphic Test Device (ATD)

    SBC: WOLF TECHNICAL SERVICES INC            Topic: N111002

    Wolf Technical Services, Inc. (Wolf) is developing a Modular Anthropomorphic Test Device (ATD) that is specifically designed for use in blast and ballistic testing. The ATD offers improved biofidelity compared to existing ATDs, with a frangible skeletal system and soft-tissue covering that simulates the human form. Sensors are provided to document loads experienced during impact events.

    SBIR Phase II 2013 Department of DefenseNavy
  10. Affordable CMAS-Resistant Thermal Barrier Coatings

    SBC: QUESTEK INNOVATIONS LLC            Topic: N12AT019

    In this STTR program, QuesTek Innovations LLC, a leader in the field of computational materials design, proposes to expand its computational Materials by Design technology by developing a thermodynamics-based design toolkit that enables the subsequent design and development of novel calcium-magnesium-alumino-silicate (CMAS)-resistant, high performance thermal barrier coatings (TBCs) for aeroengine ...

    STTR Phase II 2013 Department of DefenseNavy
US Flag An Official Website of the United States Government