List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Nickel Aluminum Bronze for Additive Manufacturing Alloy Development

    SBC: QUESTEK INNOVATIONS LLC            Topic: N171088

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to design and optimize a new Nickel Aluminum Bronze (NAB) alloy for use as feedstock material in directed energy deposition (DED)-based additive manufacturing (AM) in order to enable the development of AM technologies for quicker, cheaper, and more reliable production and repair of NAB ...

    SBIR Phase II 2018 Department of DefenseNavy
  2. Computational Tools to Enable Development of Alloys and Coatings for Advanced Gas Turbine Engines

    SBC: QUESTEK INNOVATIONS LLC            Topic: N162128

    QuesTek Innovations LLC, a leader in the field of Integrated Computational Materials Engineering (ICME), proposes to develop an ICME analysis tools involving Bayesian analysis, variance analysis, uncertainty management and database comparison and assessment functionalities to address the issue of database and model quality. QuesTek will apply the computational tool to improve databases and models ...

    SBIR Phase II 2018 Department of DefenseNavy
  3. Novel, High-Efficiency, Light-weight, Flexible Solar Cells as Electrical Power Generation Source

    SBC: MicroLink Devices            Topic: N16AT006

    MicroLink Devices proposes to integrate its high-efficiency, lightweight, and flexible solar sheets to the Puma UAS platform to significantly extend the flight endurance of the aircraft. The Navy has a growing fleet of small unmanned aerial system (UAS) vehicles that enable tactical intelligence, surveillance and reconnaissance (ISR) capabilities not possible before, and a need to extended mission ...

    STTR Phase II 2018 Department of DefenseNavy
  4. Reduced Cost Fabrication of Optical Sapphire Hyper-hemispheres for Submarine Masts

    SBC: ADOLF MELLER COMPANY            Topic: N161036

    The objective of the proposal is to reduce the cost of fabrication of sapphire optical hyper-hemispheres for submarine masts. Due to the nature of sapphire, deriving complex geometries from grown boules using current conventional fabrication techniques is one of the major contributors to cost. Removing excess material requires long diamond tool grinding cycles. New advances in ultrasonic technolog ...

    SBIR Phase II 2018 Department of DefenseNavy
  5. Innovative Materials for Highly Loaded Wear Application in Arresting Gear Tailhook Components

    SBC: QUESTEK INNOVATIONS LLC            Topic: N093175

    Ferrium M54 is an ultrahigh-strength, high, toughness steel with high resistance to grinding burn damage, and stress corrosion cracking, which provides many technical and commercial benefits for use in the F-18 E/F/G hook point application over the incumbent 4330V steel. The technical advantages for risk mitigation, while extending the component life at approximately the same cost makes for a good ...

    SBIR Phase II 2018 Department of DefenseNavy
  6. Application of a Low-Cost, Flame-Resistant Treatment to the Marine Corps Combat Utility Uniform that Provides Durable, Flame-Resistant Properties

    SBC: PROPEL, LLC            Topic: N181004

    Propel LLC will develop novel and innovative low cost fire resistant (FR) polymers and yarns. These FR materials will be spun with cotton, and new innovative low cost FR NYCO textiles produced. The performance objective will be to meet the physical performance requirements for the USMCs Marine Corps Combat Utility Uniform, with FR properties based on those for the USMCs Fire Resistant Organization ...

    SBIR Phase I 2018 Department of DefenseNavy
  7. Affordable Manufacturing of Refractory Metal Components

    SBC: SCIAKY, INC.            Topic: N142125

    The primary objective of this SBIR initiative is to develop, demonstrate, and validate new manufacturing technologies. The focus is complex parts made from refractory metals manufactured at reduced costs and increased fabrication rates. The target components are for use in post-boost control system (PBCS) hot-gas valves and manifolds. Emphasis on and addressing scale up for fabrication of full-sca ...

    SBIR Phase II 2018 Department of DefenseNavy
  8. Low-Density, Low-Volume Explosion Suppression Material for Aircraft Fuel Tanks

    SBC: Response Technologies, LLC            Topic: N182121

    Response Technologies (RT) seeks to determine the technical feasibility of a: scalable, economical, repeatable, and optimized polymeric matrix (RTPM). RTPM shall have universal fuel compatibility and could replace incumbent reticulated polyurethane foams in explosion suppression fuel tanks. RTs process utilizes additive manufacturing to produce polymeric parts from 0.5 to 20 PCF. This will be furt ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. Low-density Multifunctional Graphene Foam as an Explosion Suppression Material

    SBC: DIGITAL MATERIALS LLC            Topic: N182121

    Aircraft fuel tanks use explosion suppression foams to mitigate the explosion effects as part of the protection system. However, considering technical challenges in maintenance protocols and relatively high fuel displacement/retention volume percentages coming along with current material solutions, the target application segment requires lightweight and high-performance innovative explosion suppre ...

    SBIR Phase I 2018 Department of DefenseNavy
  10. Shallow Water Communications for Mine Warfare

    SBC: Btech Acoustics, LLC            Topic: N161027

    A system to covertly communicate in underwater acoustic shallow water environment for Naval applications is described. Techniques for clandescent and directional communication are evaluated. Broadband underwater communications are developed.

    SBIR Phase II 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government