You are here

Award Data

For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: Sensigma Llc            Topic: N18AT005

    Naval aircraft components are routinely made of 7000 series aluminum alloys due to their strength, weight and fatigue properties. Present Additive Manufacturing (AM) processes fall short of producing 7000 series Al alloys successfully due to lack of porosity, and thermal and composition control. In-situ methods implemented to date largely only yield information about the component surface and othe ...

    STTR Phase II 2020 Department of DefenseNavy
  2. Data Analytics for Navy Aircraft Component Fatigue Life Management

    SBC: avnik defense solutions inc            Topic: N182100

    Many components and structural parts on military aircraft can experience fatigue-induced failure modes, the likelihood of which typically depend on the historical aircraft usage regimes. AVNIK Defense Solutions, Inc. is leading this NAVAIR SBIR project to develop new automated methods for managing fatigue life of aircraft components, considering the actual usage and historical field experience, to ...

    SBIR Phase II 2020 Department of DefenseNavy
  3. SC2RAM for Information Operations (SC2RAM-IO)

    SBC: SOAR TECHNOLOGY, INC.            Topic: N132132

    Manipulation of online social media is an acute national security issue. We propose development of synthetic actors in support of training and experimentation to recognize and to counter threats to social-cyber security.

    SBIR Phase II 2020 Department of DefenseNavy
  4. Method for Locally Measuring Strength of a Polymer-Inorganic Interface During Cure and Aging

    SBC: METNA CO            Topic: A17AT016

    A nondestructive test system is under development for thorough, rapid and economical evaluation of the structure and properties of polymer-inorganic interfaces during curing and in service. The system is capable of in-situ, real-time and spatially resolved monitoring of the molecular structure and properties. It employs (single-sided) NMR relaxometry principles to detect and quantify defects and d ...

    STTR Phase II 2020 Department of DefenseArmy
  5. Data Analytics and Machine Learning Toolkit to Accelerate Materials Design and Processing Development

    SBC: CFD Research Corporation            Topic: N19AT020

    The US Navy has identified refractory high entropy alloys (RHEAs) and metal additive manufacturing (AM) as enabling technologies to meet performance and sustainability targets for shipboard and aircraft systems. Key challenges include designing RHEAs and optimizing metal AM to achieve desired material properties for Navy propulsion applications. Developing materials and processes via traditional e ...

    STTR Phase II 2020 Department of DefenseNavy
  6. Dynamic Near-Field Radar Target Modeling in Scene Generator Systems

    SBC: Signature Solutions, Inc.            Topic: A18005

    High fidelity scene generators utilize radar target models over the entire flight profile of a weapon system or sensor under test. As such, radar signatures generated from these models must encompass the entire simulation flight path to include a continuum of engagement conditions ranging from the far-field to very near-field. Signature Solutions, Inc. proposes a technical approach for dynamic and ...

    SBIR Phase II 2020 Department of DefenseArmy
  7. Icephobic Coatings or Surface Treatments for Turbomachinery Ice Protection Applications

    SBC: HygraTek LLC            Topic: N182115

    Icing conditions create significant safety concerns within the aircraft turbomachinery, and in surrounding nacelles, stators, and thrust vectoring surfaces. Icephobic surfaces could significantly reduce the accretion of ice within these components, allowing for safer operation. In our Phase I effort, HygraTek developed extremely durable elastomeric coatings, that display some of the lowest ice adh ...

    SBIR Phase II 2020 Department of DefenseNavy
  8. Seamless Knitting for Military Protective Clothing

    SBC: PROPEL, LLC            Topic: N182124

    The objective of this efforts is to introduce new, improved knit technology to provide more comfortable knitwear for the Sailor by improving fit, increasing air permeability, wicking away moisture, reducing seams and chafing, reducing bulk, and providing the potential for increased protection (Flame Resistant (FR) and No Melt/No Drip) while reducing waste and saving time and money for the Governme ...

    SBIR Phase II 2020 Department of DefenseNavy
  9. Automated, Drone-Based Grade Crossing Inspection

    SBC: MTRI, Inc.            Topic: 190FR6

    Drone–based assessment of rail grade crossings offers a great potential for rapid assessment of hang-up condition, visual sight line analysis, and crossing infrastructure. Through the Phase I SBIR, a proof-of-concept system was demonstrated at highway-rail crossings near Chelsea, MI with partner review. The collected imagery was processed through 3D photogrammetric software to produce high resol ...

    SBIR Phase II 2020 Department of Transportation
  10. Real Time Automated Multi-Sensor Target Classification Algorithm

    SBC: Archarithms, Inc            Topic: A18095

    This research develops an algorithm capable of reliable target classification for a wide range of targets, including, but not limited to, Rockets, Artillery and Mortars (RAM); Unmanned Aerial Vehicles (UAVs); and cruise missiles. For defensive High Energy Laser (HEL) missions, the engagement timeline can be very short. Thus, it is highly desirable to have a robust target classification system that ...

    SBIR Phase II 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government