You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Functional Graded Conductor Rails for Electromagnetic Launchers

    SBC: Plasma Processes, LLC            Topic: N101086

    The US Navy is pursuing the development of an electromagnetic rail gun (EMRG), which promises to extend naval fire support and increase ship safety. Such guns have been built and operated successfully, however several obstacles prevent them from widespread usage in the field. One specific obstacle is the development of suitable interface between the armature and conductor rails. Abrasion, arcs, mo ...

    SBIR Phase II 2011 Department of DefenseNavy
  2. Improved Stability of Double Base Propellants

    SBC: Analytical Services, Inc.            Topic: N092109

    In the proposed effort, ASI will be teaming with a major propulsion contractor to develop next generation thermal stabilizers for double base propellants. The scope includes chemical synthesis, propellant development and testing, and accelerated aging.

    SBIR Phase II 2011 Department of DefenseNavy
  3. Prognostic Sensor Microsystem

    SBC: EVIGIA SYSTEMS INC            Topic: N092100

    The proposed SBIR Phase II project is to develop miniature light-weight high-functionality multi-sensor systems that meet the requirements for prognostics and health management of military equipment, and their life cycle management and condition-based maintenance. The systems integrate temperature, shock/vibration, and strain sensors with low-power CMOS circuit for sensor data management, data pro ...

    SBIR Phase II 2011 Department of DefenseNavy
  4. Belt Shift Interlock Delay/Deaccelerator with Learning Curve Software to Increase Seatbelt Usage on Commercial Vehicles

    SBC: The Tenik Group Inc.            Topic: 07FM1

    Various methods for increasing seat belt usage have been investigated over the last several years including visual and audible warnings currently installed in today’s vehicles. In spite of these attempts, FMCSA research has shown that drivers of about 59% of commercial motor vehicles (those weighing 10,000 pounds or more that operate in interstate commerce) buckle their safety belts as compared ...

    SBIR Phase II 2011 Department of Transportation
  5. Active Laser Protection System

    SBC: Aegis Technologies Group, LLC, The            Topic: N111001

    Rugged and compact laser systems operating in the visible and infrared spectrum with output powers sufficient to damage the eye are becoming increasingly more accessible. In addition, ultra-short (femtosecond) laser systems with peak powers in the terawatts are now commercially available. Laser eye protection (LEP) for a wide range of laser wavelengths and pulse duration is important. Passive devi ...

    SBIR Phase I 2011 Department of DefenseNavy
  6. TAC PROPOSES TO CONDUCT A STUDY TO EVALUATE THE COMPARATIVE EFFECTIVENESS OF VARIOUS FORWARD-LOOKING AUTONOMOUS SENSORS AND ALGORITHMS FOR TLAM-C.

    SBC: The Associated Corp            Topic: N/A

    TAC PROPOSES TO CONDUCT A STUDY TO EVALUATE THE COMPARATIVE EFFECTIVENESS OF VARIOUS FORWARD-LOOKING AUTONOMOUS SENSORS AND ALGORITHMS FOR TLAM-C. THE CURRENT TLAM-C USES A TERRAIN MAPPING RADAR ALTIMETER AND CORRELATES THE SENSED AREA AT KEY WAYPOINTS WITH A STORED DIGITAL REPRESENTATION OF THE TERRAIN AREA AT THE WAYPOINTS TO PROVIDE MID-COURSE AND TERMINAL GUIDANCE CORRECTION TO THE INERTIAL NA ...

    SBIR Phase I 1984 Department of DefenseNavy
  7. THE OBJECTIVE OF THIS DEVELOPMENTAL EFFORT IS TO DETERMINE THE FEASIBILITY OF DEVELOPING A COMPUTER INTEGRATED ROBOT WORK CELL GAGING FINISHED PARTS OR OTHER ASSEMBLY/MACHINING OPERATIONS.

    SBC: Autoflex, Inc.            Topic: N/A

    THE OBJECTIVE OF THIS DEVELOPMENTAL EFFORT IS TO DETERMINE THE FEASIBILITY OF DEVELOPING A COMPUTER INTEGRATED ROBOT WORK CELL GAGING FINISHED PARTS OR OTHER ASSEMBLY/MACHINING OPERATIONS. THE FOCUS OF THE RESEARCH IS TO CONTROL THE ROBOT TOOL CONTROL POINT (TCP) THROUGH AN ADAPTIVE FEEDBACK CONTROL SYSTEM. THE ROLE OF THE FEEDBACK CONTROL SYSTEM IS TO CONTROL AND MODIFY THE PATH OF THE TCP TO WIT ...

    SBIR Phase I 1984 Department of DefenseNavy
  8. THE OBJECTIVE OF THIS DEVELOPMENT IS TO DETERMINE THE TECHNICAL FEASIBILITY OF DEVELOPING A THREE DIMENSIONAL VISION BASED PASSIVE OBJECT RECOGNITION SYSTEM CAPABLE OF GENERATING THREE DIMENSIONAL COORDINATE LOCATION INFORMATION IN REAL TIME AT VIDEO

    SBC: Autoflex, Inc.            Topic: N/A

    THE OBJECTIVE OF THIS DEVELOPMENT IS TO DETERMINE THE TECHNICAL FEASIBILITY OF DEVELOPING A THREE DIMENSIONAL VISION BASED PASSIVE OBJECT RECOGNITION SYSTEM CAPABLE OF GENERATING THREE DIMENSIONAL COORDINATE LOCATION INFORMATION IN REAL TIME AT VIDEO FRAME RATES OF 30 FRAMES PER SECOND. THE SYSTEM CONFIGURATION UNDER INVESTIGATION WILL UTILIZE PARALLEL PROCESSING OF RAW VIDEO INPUT FROM MULTIPLE C ...

    SBIR Phase I 1984 Department of DefenseNavy
  9. DEVELOPMENT OF A RUGGEDIZED LOW COST MICROCOMPUTER

    SBC: Kms Fusion Inc            Topic: N/A

    N/A

    SBIR Phase I 1984 Department of DefenseNavy
  10. NON-METALLIC MATERIALS

    SBC: Patel Engineers            Topic: N/A

    THE ARRHENIUS METHODOLOGY IS CURRENTLY ACCEPTED AS STATE-OF-THE-ART IN THE REALM OF PREDICTING THERMAL LIFE ON NON-METALLIC MATERIALS. APPLICATION OF THE ARRHENIUS METHODOLOGY REQUIRES THE AVAILABILITY OF EMPIRICAL LIFE TESTING DATA, WHICH MAY BE GENERATED FOR A VARIETY OF PHYSICAL/ELECTRICAL PROPERTIES FOR ANY GIVEN MATERIAL. A LARGE QUANTITY OF SUCH DATA HAS BEEN GENERATED BY A MULTITUDE OF SOUR ...

    SBIR Phase I 1984 Department of DefenseNavy
US Flag An Official Website of the United States Government