For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Automated Warhead Characterization System (AWCS)


    To advance the Automated Warhead Characterization System (AWCS), an innovative yet practical technology solution for NAVAIR, MSI proposes to perform Phase II of the AWCS SBIR project. By providing expanded and enhanced data acquisition capability, significantly reduced turnaround time, and streamlined operation for the end user, MSIs AWCS technology will improve the current arena testing process s ...

    SBIR Phase II 2015 Department of DefenseNavy
  2. Infrared-Transparent Electromagnetic Shield Coatings


    In this SBIR program, Structured Materials Industries, Inc. (SMI) is developing infrared-transparent, electromagnetic shield coatings which can be applied to electro-optic sensor windows and domes. The coatings will be deposited by metal organic chemical vapor deposition (MOCVD), which can deposit high quality films with very low stress and excellent uniformity on 3-dim ...

    SBIR Phase II 2015 Department of DefenseNavy
  3. Atmospheric Infra-red Transmittance Calculator (AIRTraC)

    SBC: SCITEC INC            Topic: N132090

    The Naval Air Warfare Center (NAWC) needs accurate, autonomous techniques for atmospheric correction of airborne imaging sensors to support flight testing, specifically validation of Noise-Equivalent Differential Temperature (NEDT) capabilities of Electro-Optical/Infrared (EO/IR) sensors used for Intelligence, Surveillance and Reconnaissance (ISR) applications. A key aspect of validating NEDT spec ...

    SBIR Phase II 2015 Department of DefenseNavy
  4. Improved Reliability Laser Based Ignition System

    SBC: Princeton Optronics            Topic: N141021

    Navy needs improved reliability ignition systems for aerospace engines to reduce flameouts at high altitudes as well as reduce maintenance cost because of the need to frequently replace the conventional spark plug igniters for fuel ignition in the engines. Laser ignition, whose feasibility has been demonstrated in the past decade for conventional natural gas and gasoline engines is very well suite ...

    SBIR Phase II 2015 Department of DefenseNavy
  5. Subsea Long Haul Optical Transponder

    SBC: David Ross Group Inc, The            Topic: N131060

    The SBIR Phase I effort demonstrated that a successful Subsea Long Haul Optical Transponder (SLOT) design for transmitting data from a branched sensor node onto a trunk cable and back to a shore terminus must consider the overall trunk cable system transmission characteristics. The SBIR Phase I study resulted in a viable SLOT concept. The Phase II effort develops the Core Transponder Module (CTM) ...

    SBIR Phase II 2015 Department of DefenseNavy
  6. Multi-ship Sonar Bistatic Automatic Active Localization

    SBC: Marine Acoustics, Inc.            Topic: N151055

    The opportunity of interest is the introduction and application of a bistatic tool set for both surface and submarine Mid-Frequency (MF) active sonar systems to enhance anti-submarine warfare (ASW) capability in strike group or coordinated surface and submarine ASW operations. The ability to localize threat submarine forces in a battlefield scenario by judicious application of bistatic capability ...

    SBIR Phase I 2015 Department of DefenseNavy
  7. Advanced Wake Turbulence Modelling for Naval CFD Applications

    SBC: Continuum Dynamics Inc            Topic: N15AT002

    Predicting the high Reynolds number viscous turbulent flow around realistic aircraft, rotorcraft and ship geometries with CFD is time consuming and computationally expensive, with the number of cells required to resolve the flow driving the computational cost. Even with modern CFD methods, the cost of adequately resolved solutions is prohibitive for most engineering tasks. The team of Continuum Dy ...

    STTR Phase I 2015 Department of DefenseNavy
  8. Novel Isogeometric Analysis Based Automation of High-Fidelity Finite Element Analysis Model Creation from Computer Aided Design

    SBC: Global Engineering and Materials, Inc.            Topic: N151009

    Global Engineering and Materials, Inc. (GEM) along with its team member Carnegie Mellon University (CMU) propose to develop an isogeometric finite element model creation and analysis toolkit for Abaqus. The isogeometric analysis toolkit for Abaqus (IGAFA) will be developed by integrating existing computer aided design (CAD) software with a customized Abaqus toolkit for automatic model generation a ...

    SBIR Phase I 2015 Department of DefenseNavy
  9. Identification and Optimization of Advanced Wireless Textiles

    SBC: PROPEL, LLC            Topic: N143127

    Propel will research, investigate, evaluate and rank fiber, yarn and textile technologies with the potential to be embedded into uniform items in order to design and develop a sailor garment system that enables linkage of ship systems to the human in the near, mid and long term.

    SBIR Phase I 2015 Department of DefenseNavy
  10. Experimental Noise Measurement System for Ship Sonar Design

    SBC: Btech Acoustics, LLC            Topic: N15AT015

    We propose to develop an acoustic and vibration noise monitoring system for investigating navy ship noise. BTech will explore the different vector sensor technologies, packaging, data recording, mounting, and noise software analysis.

    STTR Phase I 2015 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government