List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Millimeter Thick, Periodically Oscillating Polarity GaN Grown via HVPE

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N131068

    Gallium Nitride is a wide bandgap, highly transparent material with a second order non-linear susceptibility similar to that of LiNbO3 with high thermal conductivity. As such, it is of interest for use as a quasi-phase matching material for several high power nonlinear devices. Kyma Technologies will grow thick (~1mm) periodically oriented GaN crystals using hydride vapor phase epitaxy (HVPE) and ...

    SBIR Phase II 2015 Department of DefenseNavy
  2. Cost Effective GaN on Diamond Template Manufacturing

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N151046

    Kyma Technologies proposes an innovative approach to grow device-quality single crystal GaN on polycrystalline diamond substrates. The result is a GaN-on-diamond template that can be inserted directly into a GaN FET epi process.

    SBIR Phase I 2015 Department of DefenseNavy
  3. Multi-ship Sonar Bistatic Automatic Active Localization

    SBC: Marine Acoustics, Inc.            Topic: N151055

    The opportunity of interest is the introduction and application of a bistatic tool set for both surface and submarine Mid-Frequency (MF) active sonar systems to enhance anti-submarine warfare (ASW) capability in strike group or coordinated surface and submarine ASW operations. The ability to localize threat submarine forces in a battlefield scenario by judicious application of bistatic capability ...

    SBIR Phase I 2015 Department of DefenseNavy
  4. Atmospheric Plasma Removal of Airfield Paint Markings and Aircraft Tire Rubber Build-up from Installed AM2 Mat Surfaces

    SBC: ATMOSPHERIC PLASMA SOLUTIONS            Topic: N151022

    While the benefits of utilizing of Expeditionary Airfields (EAFs) by the US military are numerous, there are several challenges regarding maintenance for which there is currently no suitable solution, such as the removal of unwanted paint markings from a previous airfield installation or tire rubber build-up which can adversely impact the nonskid performance. There is an urgent need for a process ...

    SBIR Phase I 2015 Department of DefenseNavy
  5. Identification and Optimization of Advanced Wireless Textiles

    SBC: PROPEL, LLC            Topic: N143127

    Propel will research, investigate, evaluate and rank fiber, yarn and textile technologies with the potential to be embedded into uniform items in order to design and develop a sailor garment system that enables linkage of ship systems to the human in the near, mid and long term.

    SBIR Phase I 2015 Department of DefenseNavy
  6. Experimental Noise Measurement System for Ship Sonar Design

    SBC: Btech Acoustics, LLC            Topic: N15AT015

    We propose to develop an acoustic and vibration noise monitoring system for investigating navy ship noise. BTech will explore the different vector sensor technologies, packaging, data recording, mounting, and noise software analysis.

    STTR Phase I 2015 Department of DefenseNavy
  7. GaN for High Rep Rate Pulsed Power

    SBC: KYMA TECHNOLOGIES, INC.            Topic: N15AT023

    Kyma will develop and model a modular high rep rate (>100kHz) photoconductive switch using GaN and commercial-off-the-shelf laser diodes. The switch will be designed to switch >1.5kV at >150A in 5-10ns.

    STTR Phase I 2015 Department of DefenseNavy
  8. Resin Infusible Carbon Uni Broadgood Stabilized by Un-Catalyzed Epoxy Resin Binder

    SBC: T.E.A.M., INC.            Topic: N151072

    Numerous carbon fiber uni products are widely used in the composites industry. These various products vary in cost, processing method, and final composite properties obtained. For example, previous studies suggest that crimp and/or thermoplastic stitch sites in traditional woven uni and stitch-bonded fabrics, respectively, lead to limited fatigue properties relative to composites derived from auto ...

    SBIR Phase I 2015 Department of DefenseNavy
  9. Automated Acoustic Monitoring System

    SBC: High Rez Consulting, LLC            Topic: N151030

    Navy combat systems employ many underwater acoustic sensors to detect submerged threats. The performance of these sensors must be maintained at high levels for the combat system to perform effectively. These sensors are exposed to harsh environments and operating conditions that, over time, compromise sensor health resulting in degraded detection performance. Additionally, excessive radiated noise ...

    SBIR Phase I 2015 Department of DefenseNavy
  10. Low Frequency Acoustic Transducers for ASW Training Targets

    SBC: Btech Acoustics, LLC            Topic: N151050

    The design and development of compact, low frequency, broadband acoustic source technology is considered for the Mobile ASW Training Targets. The Phase I effort considers evaluation of several novel low frequency transducer designs and exploration of the associated trade space, including performance, size and cost. Design feasibility is supported with calculations of expected performance and by pr ...

    SBIR Phase I 2015 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government