Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Individualized Fatigue Management Program Technology for Trucking Operations

    SBC: PULSAR INFORMATICS, INC.            Topic: 091FM1

    Individual differences in vulnerability to sleep loss and fatigue from extended work hours and night work are a substantial problem in transportation work schedule development, fatigue risk management strategies, and prediction of performance impairment in real-world operations.  This project will deliver an individualized Fatigue Management Program (FMP) technology for trucking operations th ...

    SBIR Phase I 2009 Department of Transportation
  2. Lightweight, Compact Atmospheric Gas Sensor

    SBC: SYNKERA TECHNOLOGIES INC            Topic: SOCOM08005

    The objective of the SBIR project is to develop a lightweight and compact atmospheric and trace gas sensors that can be safely used within the Scope of Certification boundary to provide real-time monitoring of CO2, O2 and trace contaminant levels in manned compartments or within piping systems onboard submersibles. .Synkera has extensive experience at development of sensor technologies for indust ...

    SBIR Phase II 2009 Department of DefenseSpecial Operations Command
  3. Series Resistance Reduction in Tunable Radio Frequency (RF) Capacitors

    SBC: PARATEK MICROWAVE, INC.            Topic: DMEA092001

    By attention to lattice parameter matching, thermal expansion coefficient mismatch reduction and composition of conducting epitaxial detemined.

    SBIR Phase I 2009 Department of DefenseDefense Microelectronics Activity
  4. Novel Nanomaterials for Environmental Protection of Special Operations Divers

    SBC: TDA Research, Inc.            Topic: SOCOM09001

    Environmental protection is a critical need for special operations forces which dive in cold water during their missions. Thermally protective diving suit must be able to provide significant thermal barriers as well as withstand high compressive loads when underwater. Current diver wet suits and dry suits are limited by their materials of construction in the degree of thermal protection they can ...

    SBIR Phase I 2009 Department of DefenseSpecial Operations Command
  5. Low Visibility Decoy Flare

    SBC: GENERAL SCIENCES INC            Topic: SOCOM09002

    Low visibility rotary aircraft decoys are needed to protect vehicles against heat seeking missile attacks without illuminating the target which exposes the aircraft to small arms fire and potentially compromising the mission. The novel approach to this challenge is to produce a decoy which emits only in the bands of interest utilizing techniques such as containment and composition selection to op ...

    SBIR Phase I 2009 Department of DefenseSpecial Operations Command
  6. FABRICATING STRUCTURAL ELEMENTS, SUCH AS I-BEAMS, FROM FIBERREINFORCED COMPOSITE MATERIALS.

    SBC: The Cumagna Corpon            Topic: N/A

    FABRICATING STRUCTURAL ELEMENTS, SUCH AS I-BEAMS, FROM FIBERREINFORCED COMPOSITE MATERIALS. THESE ELEMENTS ARE EXPECTEDTO BE EXTREMELY STRONG, ONE-FOURTH THE DENSITY OF STEEL, ANDTO PERMIT CONSIDERABLE SAVINGS IN THE COST OF ERECTION, MAINTENANCE, AND REPLACEMENT OF BRIDGES, ETC. PHASE I WILL PRODUCE, TEST, AND ANALYZE I-BEAMS FABRICATED FROM SEVERAL MAGNAWEAVE CONSTRUCTIONS (WEAVE GEOMETRIES); TH ...

    SBIR Phase I 1983 Department of Transportation
  7. N/A

    SBC: Raymond & Lae Engineering,            Topic: N/A

    N/A

    SBIR Phase II 1999 Department of Transportation
  8. Rapid-Scan Noninvasive Stress Measurement Technology

    SBC: Stress Sensors, Inc.            Topic: N/A

    Not Available A number of shortcomings in current active control systems preclude their widespread use: 1) need for higher actuator authority, 2) need for robust compact actuators with ease of implementation, and 3) need for improved power handling and driving electronics. The innovation proposed is a new approach to active material and electronic systems for the control of vibrations in aeroelas ...

    SBIR Phase I 1999 Department of Transportation
  9. Visible Hyperspectral Image Projector Based on Spatial Light Modulators

    SBC: Boulder Nonlinear Systems, Inc.            Topic: N/A

    There are many applications for hyperspectral image detectors, but for the detectors to be widely accepted standardized calibration protocols must be developed. This research aims to bridge this gap through the development of a commercially available hyperspectral image projector (HIP) system. The proposed effort is to build a prototype visible HIP system to generate calibrated, realistic imagery ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
  10. Kilopixel Array Cryostat (KPAC) System for Mulit-kilogram Transition Edge Sensor (TES) Arrays

    SBC: High Precision Devices, Inc.            Topic: N/A

    Transition Edge Sensor (TES) detector development at NIST has reached a level where arrays containing several thousand pixels (kilopixels) are practical and , indeed, necessary for fielding systems required for many industrial, research, and homeland security applications. Current easily deployable cryostat technology required to reach the ultra-cold operating temperatures of TES arrays (50 to 100 ...

    SBIR Phase II 2009 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government