You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Liquid Rocket Engine Combustion Components Fabricated from ZrB2/BN Composite Using Electroconsolidation (TM) Rapid Densification Technique

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to design and fabricate selected liquid rocket engine combustion components. This goal will be accomplished by developing a low-cost, near net-shape technology for fabrication and rapid densification of ablation and oxidation-resistant LRE components for a wide variety of Air Force missions. The material which will be used for this purpose is zirconium diboride/boron ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Miniature Unmanned Aerial Vehicle (MUAV)

    SBC: Sensintel Inc.            Topic: SOCOM05011

    This proposal will design, develop, and demonstrate a self-contained probe that will provide sensor videos on-demand to aircraft operators. A Miniature Unmanned Aerial Vehicle (MUAV) is proposed to meet this requirement. The MUAV will be capable of being launched from existing airborne aircraft platforms, including helicopters, and will be capable of being controlled by the aircraft operator in fl ...

    SBIR Phase I 2006 Department of DefenseSpecial Operations Command
  3. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  4. DEVELOPMENT OF AN ADVANCED FAN BLADE CONTAINMENT SYSTEM

    SBC: Advanced Structures Technology            Topic: N/A

    AN ADVANCED TURBINE ENGINE FAN BLADE CONTAINMENT SYSTEM USING CERAMIC TILES ON A POLYMER FIBER BACKING RING IS PRO- POSED. THE PROPOSED CERAMIC/POLYMER-FIBER SYSTEM HAS PROVEN MORE WEIGHT EFFECTIVE THAN MONOLITHIC METALLIC OR POLYMER MATERIALS FOR STOPPING PENETRATION OF BALLISTIC MUNITIONS PROJECTILES. IT IS EXPECTED THAT THIS TECHNOLOGY, ORIGINAL-LY DEVELOPED FOR AIRCRAFT ARMOR SYSTEMS, WILL DEC ...

    SBIR Phase II 1989 Department of Transportation
  5. DEVELOPMENT OF AN ADVANCED FAN BLADE CONTAINMENT SYSTEM

    SBC: Advanced Structures Technology            Topic: N/A

    N/A

    SBIR Phase I 1988 Department of Transportation
  6. Helmsman's Recording Accelerometer (HRA)

    SBC: Applied Measurement Systems,            Topic: N/A

    Special Operations Forces (SOF) require a real time display of appr opriate data to allow the helmsman to access the damage potential to his cargo (equipment/personnel) and support his decision relative to speed and course selection when operating in rough water. Furthermore, maintenance support personnel need quantitative data to support design decisions and maintenance activities. This proposa ...

    SBIR Phase I 1997 Department of DefenseSpecial Operations Command
  7. VERIFICATION OF STEEL PLACEMENT IN PORTLAND CEMENT CONCRETE USING SHORT-PULSE RADAR TECHNIQUES

    SBC: Bomar Associates Inc.            Topic: N/A

    THERE IS A NEED FOR A RAPID, NON-DESTRUCTIVE METHOD TO TEST FOR PROPER STEEL PLACEMENT IN PORTLAND CEMENT PAVEMENTS. ISTHE GOAL OF THIS PROPOSED PROGRAM TO DEMONSTRATE THE FEASIBILITY OF USING SHORT-PULSE, GROUND-PENETRATING RADAR AS A MEANS OF RAPID STEEL LOCATION IN CONCRETE PAVEMENT. A GENERAL BACKGROUND IN GROUND-PENETRATING RADAR THEORY IS PRESENTED. LABORATORY AND FIELD MEASUREMENTS USING A ...

    SBIR Phase II 1990 Department of Transportation
  8. VERIFICATION OF STEEL PLACEMENT IN PORTLAND CEMENT CONCRETE USING SHORT-PULSE RADAR TECHNIQUES

    SBC: Bomar Associates Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of Transportation
  9. Image Intensified Lightweight Lens Development

    SBC: Breault Research Organization, Inc.            Topic: SOCOM04009

    In recent engagements, the military has employed unconventional methods to gain a tactical advantage. One of these methods is increased night patrols and night combat operations using night vision goggles. Even though the capabilities of these devices have increased, they are still large and heavy, which reduces individual mobility and increases soldier fatigue. The classical approach at reduci ...

    SBIR Phase I 2004 Department of DefenseSpecial Operations Command
  10. Highway Capacity Software in Portable Graphical User Interface (GUI) Format

    SBC: Catalina Engineering, Inc.            Topic: N/A

    The Highway Capacity Software (HCS) has, for the past 10 years, been the principal tool for applying the analysis methods of the Highway Capacity Manual (HCM). The HCS has been DOS-based with a very limited user interface. With a number of new research materials being produced, and an approved plan in place which leads to publication of an HCM 2000 and accompanying software, there is a strong op ...

    SBIR Phase II 1998 Department of Transportation
US Flag An Official Website of the United States Government