Award Data

IISI Corporation proposes to develop a Small Team Command, Control Communications and Situational Awareness (C3SA) product to improve situational awareness while maintaining a Low Probability of Detection (LPD) for Special Operations teams in/under the water and on land. Phase I of the SBIR 08-001solicitation is limited to a Feasibility Study of the C3SA technology. IISI Corporation has assembl ...

This project addresses the specific need for an improved method for cleaning insulators that electrically isolate the third rail. Current methods are labor intensive and expensive, but the insulators should be cleaned regularly to avoid even greater expense. This project is to adapt an innovative photolytic paint stripper to cleaning insulators for the third rail. The overall objective is to de ...

An optical, non-contact roof deformation monitoring system will be designed based on an existing multi-point, non-contact, multi-axis optical sensor-based measurement system that is currently used to measure chest deflection in crash-test dummies. The research involves determining suitable components to be used in the optical path, from high-power LED arrays through lenses and optical sensors. T ...

Positioning and navigation have become a mainstay of everyday life in the U.S.; applications of interest include navigation of vehicles of all kinds, infrastructure mapping, and safety of life systems. Many of these recent applications have become possible through the GPS. With the recognized vulnerabilities of GPS, it is evident that equivalent backup systems must be developed. One possible so ...

The FRA has identified cab car end door kick panels as possible emergency egress panels. They could be used in circumstances where the convential emergency exits are unusable. The industry has operational and maintenance concerns. The objectives of this SBIR are to define the requirements for end door emergency egress panels and identify alternative design approaches and assess their effectiven ...

Railroad freight car safety and maintenance cost is directly related to knowledge of the actual braking force provided by a brake shoe. If the brake force is too low, safety is at risk. If the brake shoe is replaced before the end of it's lifetime to ensure safety, maintenance and thus operating costs are increased. Currently there is no system in place to monitor brake shoe force during train ...

WE PROPOSE THE INVESTIGATION OF NUCLEATION PROCESSES CAPABLEOF CAUSING THE FREEZING OF SUPERCOOLED WATER DROPLETS IN FRONT OF A MOVING SUBSONIC AIRCRAFT. THE GOAL IS TO DEVELOPA NUCLEATION MECHANISM CAPABLE OF FREEZING THE WATER DROPLETS FAR ENOUGH IN FRONT OF THE MOVING PLANE SO THAT BY THE TIME THE PLANE REACHES THE DROPLETS THEY ARE FROZEN AND BOUNCE FROM THE LEADING EDGES AND THE IMPENAGE, WIT ...

KVH INDUSTRIES PROPOSES TO THOROUGHLY INVESTIGATE BOTH CONVENTIONAL AND INNOVATIVE USES FOR THE SELF POWERED VEHICLE DETECTOR (SPVD) AND TO MODIFY THE EXISTING DESIGN, IF REQUIRED, TO MEET THE SPECIFICATIONS OF THE NEW APPLICATIONS. THE OVERALL GOAL OF THE PROPOSED SBIR PHASE IEFFORT CAN BE SUBDIVIDED INTO THREE FUNDAMENTAL OBJECTIVES: RESEARCH INTO THE VARIOUS APPLICATIONS OF SPVD TECHNOLOGY AND ...

THE OVERALL OBJECTIVE OF THIS PROJECT, INCLUDING PHASES I AND II, IS TO DEVELOP A DGPS RECEIVER FOR THE RECEPTION OF CODED MSK MODULATION USING VLSI TECHNOLOGY TO IMPLEMENT SIGNAL DEMODULATION AND DECODING. DURING PHASE I, THE FOLLOWING ISSUES WILL BE ADDRESSED: 1) SELECTION OF APPROPRIATE ATOMSPHERIC NOISE MITIGATION TECHNIQUES 2) SELECTION OF APPROPRIATE ALTERNATE DEMODULATION/ DECODING TECHNIQU ...

N/A