List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Through-the-Hull Data Transfer

    SBC: Btech Acoustics, LLC            Topic: N191038

    This Phase I proposal to Topic N191-038 describes BTechs approach to transferring data through a submarine hull with a data capacity in excess of 10k bit/sec (bps) using piezoelectric ultrasonic transducers. Some of the communication techniques include signaling to increase data packet detection at lower power levels. The Phase I baseline design of the signal schemes and the transducer system will ...

    SBIR Phase I 2019 Department of DefenseNavy
  2. Rapid Prototype Portable Combat and Launch System

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N95053

    SEA CORP will leverage the innovative technologies developed under the prior SBIR Phase II project and extend the Research & Development (R&D) activities to the development of critical submarine combat system payload integration efforts. In the previous effort, components were successfully developed facilitating integration of Improved Submarine Launched Mobile Mine (ISLMM) capability aboard subma ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. Solid State Radar Emitter Identification

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N171043

    The ultimate goal of this SBIR effort is to deliver improvements to existing Fleet electronic warfare support systems by using statistical learning techniques to aid in the classification and unique identification of modern radar emitters. Since software-defined and solid-state emitters do not have the analog features traditionally used for classification, we will use more abstract, but well-defin ...

    SBIR Phase II 2019 Department of DefenseNavy
  4. Seamless Knitting for Military Protective Clothing

    SBC: PROPEL, LLC            Topic: N182124

    Propel will undertake research efforts to investigate seamless knitting for U.S. Navy knitwear as compared to cut and sew assembly. Propel will develop initial concepts and swatches and evaluate their technical feasibility, comparing promising concept to traditionally sewn seams using a variety of internationally recognised standards and test methods. Propel will also develop a design brief and co ...

    SBIR Phase I 2019 Department of DefenseNavy
  5. Non-collinear Wave-front Curvature Range Measurement

    SBC: MIKEL, INC.            Topic: N02025

    The goal of this Phase II SBIR is to extract more information from existing submarine acoustic sensors through a highly innovative inter- and intra-sensor correlation algorithmic, in order to provide U.S. submarines with increased acoustic superiority over increasingly quiet adversaries. U.S. adversaries are continuously improving their acoustic quieting technologies through efforts such as marine ...

    SBIR Phase II 2019 Department of DefenseNavy
  6. Submarine Sensor Environmental Inference

    SBC: High Rez Consulting, LLC            Topic: N182135

    Within the increasingly contested undersea operational arena, the Navy needs a tactical and competitive advantage in undersea sensing and detection through improved situational awareness with respect to environmental parameters, such as sound speed profile (SSP) and bottom properties, that affect overall submarine sonar sensor performance. Current approaches for enhancing environmental situational ...

    SBIR Phase I 2019 Department of DefenseNavy
  7. Low-Density, Low-Volume Explosion Suppression Material for Aircraft Fuel Tanks

    SBC: Response Technologies, LLC            Topic: N182121

    Response Technologies (RT) seeks to determine the technical feasibility of a: scalable, economical, repeatable, and optimized polymeric matrix (RTPM). RTPM shall have universal fuel compatibility and could replace incumbent reticulated polyurethane foams in explosion suppression fuel tanks. RTs process utilizes additive manufacturing to produce polymeric parts from 0.5 to 20 PCF. This will be furt ...

    SBIR Phase I 2018 Department of DefenseNavy
  8. Application of a Low-Cost, Flame-Resistant Treatment to the Marine Corps Combat Utility Uniform that Provides Durable, Flame-Resistant Properties

    SBC: PROPEL, LLC            Topic: N181004

    Propel LLC will develop novel and innovative low cost fire resistant (FR) polymers and yarns. These FR materials will be spun with cotton, and new innovative low cost FR NYCO textiles produced. The performance objective will be to meet the physical performance requirements for the USMCs Marine Corps Combat Utility Uniform, with FR properties based on those for the USMCs Fire Resistant Organization ...

    SBIR Phase I 2018 Department of DefenseNavy
  9. All Solid-State Batteries for Navy Applications

    SBC: NanoCoatings, Inc.            Topic: N162092

    The U.S. Navy requires reliable all-solid-state batteries (ASSB) with solid electrolytes to enhance their performance and safety. The novelty of the proposed study by NanoCoatings, Inc. (NCI) is the use of Magnetron Sputtering Physical Vapor Deposition (MS PVD) to manufacture thin, dense electrolyte layers of lithium-ion conductor and multiple cathode layers to provide high levels of ionic and ele ...

    SBIR Phase II 2018 Department of DefenseNavy
  10. Reduced Cost Fabrication of Optical Sapphire Hyper-hemispheres for Submarine Masts

    SBC: ADOLF MELLER COMPANY            Topic: N161036

    The objective of the proposal is to reduce the cost of fabrication of sapphire optical hyper-hemispheres for submarine masts. Due to the nature of sapphire, deriving complex geometries from grown boules using current conventional fabrication techniques is one of the major contributors to cost. Removing excess material requires long diamond tool grinding cycles. New advances in ultrasonic technolog ...

    SBIR Phase II 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government