List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 3D Polar Woven Deployable Skirt with Integrally Woven Attachment Features

    SBC: T.E.A.M., INC.            Topic: Z702

    T.E.A.M., Inc. proposes to develop and demonstrate a manufacturing method for a 3D woven deployable skirt structure with polar fiber orientation and integrally woven rib attachment features and trailing edge radii. The novelty of our approach comes from the combination of several unique textile manufacturing technologies that to our knowledge have never been successfully combined into a single pr ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  2. A Compact Submersible Trace Chemical Analyzer for Tracking Plumes of Chemical Explosives with Autonomous Underwater Vehicles

    SBC: SUBCHEM SYSTEMS, INC.            Topic: N/A

    "This SBIR Phase II project involves the development, testing and integration of a submersible solvent extraction module (SubSEM), tested in an SBIR Phase I feasibility study, with a miniature optical analytical detection system for the continuous sampling,pre-concentration, and chemical analysis of TNT present at ultra-trace concentration levels in seawater. The integrated underwater sampling and ...

    SBIR Phase II 2002 Department of DefenseNavy
  3. A COMPACT, LOW-POWER SUBMERSIBLE CHEMICAL ANALYZER PAYLOAD FOR AUTONOMOUS UNDERWATER VEHICLES

    SBC: SUBCHEM SYSTEMS, INC.            Topic: N03223

    SubChem Systems proposes to design and develop a compact, low power submersible chemical analyzer payload for deployment on autonomous underwater vehicles (AUV). The primary objective of this proposal is to demonstrate the feasibility of developing a Micro AUV Ready Chemical (MARCHEM) Analyzer. This device will be capable of performing real-time, rapid response measurements of trace chemicals in ...

    SBIR Phase I 2004 Department of DefenseNavy
  4. A Discrete-Element Method for Reactive Particle Transport and Adhesion in a Gas Turbine Engine

    SBC: New England Research & Development, LLC            Topic: N171034

    There are numerous conditions where gas turbine engines ingest small particulates. Of particular concern are the particles (~1-10 micrometer) that are ejected into the atmosphere as volcanic ash. Ingestion of these particles has numerous detrimental effects. Particle collisions cause abrasion of compressor blades, leading to loss of efficiency. Ingested particles that partially or completely melt ...

    SBIR Phase I 2017 Department of DefenseNavy
  5. A NEW METHOD FOR LINEAR SEQUENCE GENERATOR CONFIGURATION ESTIMATION

    SBC: Cynetics Corp.            Topic: N/A

    THERE IS A NEED TO IMPROVE RECEPTION OF AND SYNCHRONIZATION OF WIDEBAND SIGNALS OF UNKNOWN PARAMETERS. FURTHER DEVELOPMENT OF THE MATHEMATICAL THEORY OF THE ESTIMATION OF GENERATOR CONFIGURATIONS FROM THEIR OUTPUTS WILL HELP TO ACCOMPLISH THIS GOAL. A PROMISING APPROACH IS TO APPLY SHIFT-AND-ADD AND OTHER PROPERTIES OF LINEAR SEQUENCES TO THE DETERMINATION OF THE GENERATOR CONFIGURATION. A PROPOSE ...

    SBIR Phase I 1989 Department of DefenseAir Force
  6. Acoustic Band Gap Materials and Devices

    SBC: LASER FARE ADVANCED TECHNOLOGY GROUP            Topic: N/A

    Laser Fare, working with Triton Systems, the Naval Undersea Weapons Center, and the Electric Boat Division of General Dynamics, recently completed the DARPA

    SBIR Phase II 2001 Department of DefenseDefense Advanced Research Projects Agency
  7. Acoustic Band Gap Materials and Devices

    SBC: LASER FARE ADVANCED TECHNOLOGY GROUP            Topic: N/A

    Laser Fare, working with Triton Systems, the Naval Undersea Weapons Center, and the Electric Boat Division of General Dynamics, recently completed the DARPA

    SBIR Phase I 2001 Department of DefenseDefense Advanced Research Projects Agency
  8. Acoustic Bandgap Materials and Devices

    SBC: LASER FARE ADVANCED TECHNOLOGY GROUP            Topic: N/A

    N/A

    SBIR Phase I 1999 Department of DefenseDefense Advanced Research Projects Agency
  9. Acoustic Buoy Release for Locating Underwater Instruments

    SBC: KVH INDUSTRIES, INC.            Topic: N/A

    KVH Industries proposes to design and demonstrate a low cost short range acoustic buoy release system designed to locate and retrieve underwater instruments. The proposed design effort will address the problems of search rate, identification, homing, slant range measurement, localization and buoy acknowledgement. The focus of the Phase I effort will be optimization of correct response to address a ...

    SBIR Phase II 1993 Department of DefenseArmy
  10. Acoustic Buoy Release for Locating Underwater Instruments

    SBC: KVH INDUSTRIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government