You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. 3D Reconstruction, Visualization, and Modeling of Buildings from Multiple Image Sources

    SBC: CREARE LLC            Topic: CBD222005

    Extended reality (XR) has emerged as a crucial tool supporting JSTO-CBD’s mission to defend warfighters against chemical/biological threats. Extended reality, including augmented, mixed, and virtual reality, coupled with accurate transport and dispersion (T&D) modeling of chemical/biological hazards, can provide critical situational awareness, enhanced live training, and immersive virtual traini ...

    SBIR Phase I 2023 Department of DefenseOffice for Chemical and Biological Defense
  2. An Automated Traffic Warning Device Deployment System for Autonomous Vehicles

    SBC: CREARE LLC            Topic: 21FM1

    Over the past decade, private industry has shown a growing interest in the development of autonomous Commercial Motor Vehicles (CMVs). A successful autonomous CMV system will require that the vehicles meet both technological requirements and existing regulatory requirements for traditional CMVs. While some regulations are passive, others require drivers to take actions. Of note is the requirement ...

    SBIR Phase II 2022 Department of Transportation
  3. Robust, Field-Ready, Inline Tool for the Accurate Measurement of Pipe Bending Stresses and Crack Detection

    SBC: CREARE LLC            Topic: 20PH1

    Throughout the United States massive fuel transport pipeline networks‒thousands of kilometers long‒ inevitably cross seismically active areas while potentially experiencing severe working environments, varied geoenvironmental conditions, and significant deformations during their service life. To minimize the risk of failure, pipelines are closely monitored utilizing in-line inspection (ILI) to ...

    SBIR Phase II 2021 Department of Transportation
  4. An Automated Traffic Warning Device Deployment System for Autonomous Vehicles

    SBC: CREARE LLC            Topic: 21FM1

    Over the past decade, private industry has shown a growing interest in the development of autonomous Commercial Motor Vehicles (CMVs). A successful autonomous CMV system will require that the vehicles meet both technological requirements and existing regulatory requirements for traditional CMVs. While some regulations are passive, others require drivers to take actions. Of note is the requirement ...

    SBIR Phase I 2021 Department of Transportation
  5. Real-Time, In-Situ Measurement of Void Fraction and Specific Surface in Fresh Concrete

    SBC: CREARE LLC            Topic: 171FH2

    Water expansion during freeze-thaw cycles can cause deterioration in concrete, leading to scaling, cracking, and crumbling over a period of years. Resistance to this damage is achieved with a system of voids formed by adding surfactants to the fresh concrete to stabilize air bubbles naturally entrained during mixing. The volume fraction, size, and spacing of these voids are critical. It is importa ...

    SBIR Phase II 2021 Department of Transportation
  6. Robust, Field-Ready, Inline Tool for the Accurate Measurement of Pipe Bending Stresses and Crack Detection

    SBC: CREARE LLC            Topic: 20PH1

    Throughout the United States massive fuel transport pipeline networks‒thousands of kilometers long‒ inevitably cross seismically active areas while potentially experiencing severe working environments, varied geoenvironmental conditions, and significant deformations during their service life. To minimize the risk of failure, pipelines are closely monitored utilizing in-line inspection (ILI) to ...

    SBIR Phase I 2020 Department of Transportation
  7. A Low-SWap Powered Air Purifying Respirator (PAPR)

    SBC: CREARE LLC            Topic: CBD181002

    The proposed low-SWaP PAPR technology improves the convenience, comfort, and protection level for respirators used in low-threat hazardous environments. Creare’s PAPR technology will be applicable to a variety of respiratory protection needs, including emergency escape, laboratory and field work in low-hazard conditions, and some combat and combat support activities. The PAPR will improve user f ...

    SBIR Phase II 2020 Department of DefenseOffice for Chemical and Biological Defense
  8. Tomographic Nanoscopy for Pathogen Identification

    SBC: SOLID STATE SCIENTIFIC CORPORATION            Topic: CBD171003

    This Phase II effort prototypes a minimal volume microscope designed to allow for a 2-D digital holographic imaging concurrent with field of view spectral content at video frame rates. The use of a laser driven IR dual beam frequency comb, coincident with the optical beam path required for a digital holographic image, will allow rapid acquisition of both the spatial and the spectral content associ ...

    SBIR Phase II 2019 Department of DefenseOffice for Chemical and Biological Defense
  9. Multimodal Acoustic Tool for Inline Pipe Inspection

    SBC: CREARE LLC            Topic: 180PH1

    The United States has a vast network of pipelines used for fuel transport. This infrastructure, installed in 1950–1970, is one of the largest in the world. Yet poor/missing records of the materials used, combined with the overall age and associated environmental degradation effects, often results in unsafe operation. Current non-destructive inspection techniques are only capable of detecting mat ...

    SBIR Phase II 2019 Department of Transportation
  10. A Multimodal Acoustic Tool for Inline Pipe Inspection

    SBC: CREARE LLC            Topic: 180PH1

    A Multimodal Acoustic Tool for Inline Pipe Inspection 3/19/2018 The US energy transport pipeline system is a longstanding distribution network with most of its still standing pipes being installed between the 1950s–1970s. Due to degradation mechanisms, such as embrittlement, capable of causing a two-fold reduction in fracture toughness, pipe rupture is a major risk. Current nondestructive ins ...

    SBIR Phase I 2018 Department of Transportation
US Flag An Official Website of the United States Government