List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. 3D Polar Woven Deployable Skirt with Integrally Woven Attachment Features

    SBC: T.E.A.M., INC.            Topic: Z702

    T.E.A.M., Inc. proposes to develop and demonstrate a manufacturing method for a 3D woven deployable skirt structure with polar fiber orientation and integrally woven rib attachment features and trailing edge radii. The novelty of our approach comes from the combination of several unique textile manufacturing technologies that to our knowledge have never been successfully combined into a single pr ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  2. Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique

    SBC: T.E.A.M., INC.            Topic: H701

    Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating potential weak spots at the panel joints. In Pha ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  3. Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique

    SBC: T.E.A.M., INC.            Topic: H701

    Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating a potential weak spots at the panel joints. ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  4. Advancing High Energy Lithium-Sulfur Batteries

    SBC: Yardney Technical Products, Inc.            Topic: Z102

    Lithium-Ion batteries have been a main source of energy for many aerospace applications over the past decade. Future space missions are facing a number of challenging requirements, including significant increase in specific energy, approaching 500 Wh/kg, and energy density of 700 Wh/l at cell level. Compared to state-of-the-art technology today, a reduction in mass and volume are necessary, along ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  5. Novel, Low-Threshold Laser Materials As Taggants For Advanced Search And Rescue

    SBC: Spectra Science Corp.            Topic: N/A

    N/A

    SBIR Phase I 1995 National Aeronautics and Space Administration
  6. Diboride Composites Reinforced with Silicon-Carbide Platelets

    SBC: White Materials Engineering            Topic: N/A

    The addition of Sic Platelets to selected diboride material systems offers the possibilities of increased toughness and improved Thermal protection. The innovative use of single crystal silicon carbide platelets with their highly reflective crystalographic planes, could lead to increased hot wall heat fluxes due to increased reflectivity of the platelets versus the normal particulate. In addition ...

    SBIR Phase II 1995 National Aeronautics and Space Administration
  7. Photogrammetric Coprocessor

    SBC: Imagery Workmate Company            Topic: N/A

    To work efficiently, the flight crew of an extended duration spaceflight will need an on board device for manipulating and processing large scale (Megaplxel) image data in real time or "interactively". For large scale high resolution photographs, this interactive capability requires processing capabilities (greater than 1 Billion Instructions per Second) that at present can be met only by dedicate ...

    SBIR Phase I 1994 National Aeronautics and Space Administration
  8. Diboride Composites Reinforced with Silicon-Carbide Platelets

    SBC: White Materials Engineering            Topic: N/A

    N/A

    SBIR Phase I 1994 National Aeronautics and Space Administration
  9. IMPROVED CAVITY RADIOMETER FOR RADIANCE MEASUREMENTS

    SBC: The Eppley Laboratorytory I            Topic: N/A

    THIS RESEARCH IS DIRECTED TOWARD IMPROVEMENT OF PRESENT SELF CALIBRATING, THERMOPILE BASED, CAVITY RADIOMETERS FOR USE IN RADIANCE MEASUREMENTS FROM EARTH VIEWING SATELLITE INSTRUMENTS. THE PRIMARY THRUST IS TO IMPROVE THE RESPONSIVITY OF THE DEVICE, AND MINIMIZE POSSIBLE THERMAL OFFSET SIGNALS WITHIN THE SENSOR. THE APPROACH INVOLVES REDESIGN OF THE THERMAL IMPEDANCE OF THE THERMOPILE ELEMENT AND ...

    SBIR Phase II 1990 National Aeronautics and Space Administration
  10. IMPROVED CAVITY RADIOMETER FOR RADIANCE MEASUREMENTS

    SBC: The Eppley Laboratorytory I            Topic: N/A

    N/A

    SBIR Phase I 1989 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government