Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Promoting Responsible Drinking: An Internet-based, Interactive Computer Tailored Intervention

    SBC: Pro-Change Behavior Systems Inc            Topic: NIAAA

    DESCRIPTION provided by applicant Excessive alcohol use is associated with a range of serious and costly health social and economic consequences at the individual and societal level This program of research serves as a venue by which to produce and test an innovative science based and cost effective means to intervene in a private convenient and individualized way with employed adults wh ...

    SBIR Phase II 2012 Department of Health and Human ServicesNational Institutes of Health
  2. Novel Membrane Systems for Olefin/Paraffin Separation

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: 18a

    Ethylene and propylene are the primary feedstocks for the manufacture of polyethylene and polypropylene, respectively. These olefins represent a major component of the polymer manufacturing cost. Consequently, there is significant economic benefit in minimizing losses of unreacted olefin from the process. Some olefin loss is a result of the need to remove paraffin from the polymerization reactor ...

    SBIR Phase I 2012 Department of Energy
  3. Diamond Refractive Focusing Optics

    SBC: Delaware Diamond Knives, Inc            Topic: 16a

    Synchrotron-based science has had a great scientific impact and will continue to have great impact going forward. In spite of the large investment in the 3rd generation light sources, most beam lines do not preserve the sources phase profile or brightness all the way to the sample. For these high brightness light sources, errors are almost completely due to distortion in the front-end optics cau ...

    SBIR Phase I 2012 Department of Energy
  4. Solid Polymer Electrolytes with High Lithium Ion Conductivity and Transport Number for Hybrid Electric Power-train Systems

    SBC: HYBRID PLASTICS            Topic: 09b

    Current energy storage devices have energy densities that are barely sufficient for low cost electric-vehicles and rely on lithium ion batteries that use flammable, unsafe, liquid electrolytes. However, in order to replace liquid electrolyes in lithium batteries for hybrid electric power train systems, solid polymer electrolytes, which have the advantages of safety and flexibility, must attain con ...

    SBIR Phase I 2012 Department of Energy
  5. Real-Time Size-Distributed Measurement of Aerosol Mass Concentration

    SBC: MSP CORPORATION            Topic: 03e

    MSP is introducing in this proposal a practical approach to a family of cascade impactors capable of real-time measurement of the size-distributed mass concentration of particles in the atmosphere. Further, because of the high sensitivity of the proposed mass transducers, these impactors will also provide nearly instantaneous information about the influence of water vapor on the size distribution ...

    SBIR Phase I 2012 Department of Energy
  6. Enhanced Quantum Efficiency of Photocathodes with Polarized Emission

    SBC: SVT ASSOCIATES, INCORPORATED            Topic: 44e

    Photocathodes with spin-polarized electron emission are used in physics research. Current photocathodes offer high polarization, but low total currents, and have limited lifetime. Research involving these polarized electrons would be more productive if a higher electron current were provided. This program seeks to increase the delivered polarized electron current from the photocathodes by adding i ...

    SBIR Phase II 2012 Department of Energy
  7. Large Area GaN-Based Avalanche Photodiodes for Operation in Extreme Environments

    SBC: SVT ASSOCIATES, INCORPORATED            Topic: 31e

    For several decades photomultiplier tubes (PMTs) have been the main technology for sensitive and low noise detection of photons in many high energy physics experiments. However, compared to solid-state photodetectors, PMTs are bulky, fragile, expensive, and need to be shielded from high magnetic fields and high pressures, which severely limit their application for future DOE projects. Hence, th ...

    SBIR Phase I 2012 Department of Energy
  8. GaAsSb/AlGaAs Superlattice High-Polarization Electron Source

    SBC: SVT ASSOCIATES, INCORPORATED            Topic: 34e

    The negative-electron-affinity (NEA) photocathodes which produce polarized electrons are a vital component of electron accelerators such as that at the Stanford Linear Accelerator Center (SLAC). Future systems, such as the International Linear Collider (ILC), will require a polarized electron beam intensity at least 20 times greater than produced by strained GaAs, which is used in the current gene ...

    SBIR Phase I 2012 Department of Energy
  9. Thin Diamond for Time-of-Flight Detectors

    SBC: Applied Diamond, Inc.            Topic: 35b

    Detectors and radiation monitors for future high energy and nuclear physics experiments must be able to withstand radiation environments several orders of magnitude harsher than those of any current device. At present, most radiation detectors are based on silicon technology, however, the practical radiation hardness limit of silicon falls far short of requirements in future high ener ...

    SBIR Phase I 2012 Department of Energy
US Flag An Official Website of the United States Government