You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Next-Generation Micro-chip Carrier for Cooling of Satellite Payload Electronics

    SBC: Thermavant Technologies, L.L.C.            Topic: AF112057

    ABSTRACT:A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink areas - and do so with minimal thermal resistance. Deliverables at conclusion of two-year effort will ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. SIGMA: Speedy Imagery Geo-registration and Motion Analysis

    SBC: VISION SYSTEMS INC.            Topic: AF131151

    ABSTRACT: VSI proposes the development of the SIGMA (Speedy Imagery Geo-registration and Motion Analysis) system, which will address three key requirements by the end of Phase II: (i) adapt to different type of sensors, sensor-configurations and sensor operating conditions, (ii) handle large amount of data in real-time or close to real-time using limited resources, and (iii) operate under conditi ...

    SBIR Phase II 2015 Department of DefenseAir Force
  3. Reduced-Order Model for the Prediction of Supersonic Aircraft Jet Noise

    SBC: INNOVATIVE TECH APPLICATIONS LLC            Topic: AF151065

    ABSTRACT:Innovative Technology Applications Company, LLC proposes the development of an analytical tool that predicts jet noise and engine performance for current and future generations of supersonic two- and three-stream engines. The goal is to provide robust and reliable noise predictions in minutes that can be used for design optimization. The physics-based approach will be capable of addressin ...

    SBIR Phase I 2015 Department of DefenseAir Force
  4. High Power Density Structural Heat Spreader

    SBC: Thermavant Technologies, L.L.C.            Topic: AF151094

    ABSTRACT:The proposed research effort will develop passive Oscillating Heat Pipe (OHP) structural heat spreaders to attach to small, ultra-high heat flux devices (e.g., GaN power amplifiers) and dissipate their heat loads uniformly across the spreaders' relatively large heat sinking surfaces - and do so with minimal thermal resistance. The research team will design, model, fabricate, test, and ana ...

    SBIR Phase I 2015 Department of DefenseAir Force
  5. Efficient shaping or reshaping of complex 3D parts using engineered residual stress

    SBC: Engineering Software Research And Development, Inc.            Topic: AF141170

    ABSTRACT:Increasing emphasis on affordability of military systems has led to a number of advances in airframe production. For example, high speed machining (HSM) has made it possible to fabricate thin structures that provide improved performance. However, near-surface plastic strains induced by HSM or surface treatments can lead to excessive component distortion such that the component requires re ...

    SBIR Phase II 2015 Department of DefenseAir Force
  6. Image Quality Indicator(s) and Software for Computed Radiography (CR)

    SBC: LICKENBROCK TECHNOLOGIES, INC.            Topic: AF131191

    ABSTRACT:This Phase II project will include the research, development, implementation and deployment of a method, new image quality indicators (IQIs) and software algorithms to automatically assist in the verification of computed radiography (CR) image quality for nondestructive testing (NDT) of military airframes.Compared to existing IQIs and methods, the new approaches will more comprehensively, ...

    SBIR Phase II 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government