You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Next-Generation Micro-chip Carrier for Cooling of Satellite Payload Electronics
SBC: THERMAVANT TECHNOLOGIES LLC Topic: AF112057ABSTRACT:A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink areas - and do so with minimal thermal resistance. Deliverables at conclusion of two-year effort will ...
SBIR Phase II 2015 Department of DefenseAir Force -
SIGMA: Speedy Imagery Geo-registration and Motion Analysis
SBC: VISION SYSTEMS INC Topic: AF131151ABSTRACT: VSI proposes the development of the SIGMA (Speedy Imagery Geo-registration and Motion Analysis) system, which will address three key requirements by the end of Phase II: (i) adapt to different type of sensors, sensor-configurations and sensor operating conditions, (ii) handle large amount of data in real-time or close to real-time using limited resources, and (iii) operate under conditi ...
SBIR Phase II 2015 Department of DefenseAir Force -
Reduced-Order Model for the Prediction of Supersonic Aircraft Jet Noise
SBC: INNOVATIVE TECH APPLICATIONS LLC Topic: AF151065ABSTRACT:Innovative Technology Applications Company, LLC proposes the development of an analytical tool that predicts jet noise and engine performance for current and future generations of supersonic two- and three-stream engines. The goal is to provide robust and reliable noise predictions in minutes that can be used for design optimization. The physics-based approach will be capable of addressin ...
SBIR Phase I 2015 Department of DefenseAir Force -
High Power Density Structural Heat Spreader
SBC: THERMAVANT TECHNOLOGIES LLC Topic: AF151094ABSTRACT:The proposed research effort will develop passive Oscillating Heat Pipe (OHP) structural heat spreaders to attach to small, ultra-high heat flux devices (e.g., GaN power amplifiers) and dissipate their heat loads uniformly across the spreaders' relatively large heat sinking surfaces - and do so with minimal thermal resistance. The research team will design, model, fabricate, test, and ana ...
SBIR Phase I 2015 Department of DefenseAir Force -
Efficient shaping or reshaping of complex 3D parts using engineered residual stress
SBC: Engineering Software Research And Development, Inc. Topic: AF141170ABSTRACT:Increasing emphasis on affordability of military systems has led to a number of advances in airframe production. For example, high speed machining (HSM) has made it possible to fabricate thin structures that provide improved performance. However, near-surface plastic strains induced by HSM or surface treatments can lead to excessive component distortion such that the component requires re ...
SBIR Phase II 2015 Department of DefenseAir Force -
Image Quality Indicator(s) and Software for Computed Radiography (CR)
SBC: LICKENBROCK TECHNOLOGIES, INC. Topic: AF131191ABSTRACT:This Phase II project will include the research, development, implementation and deployment of a method, new image quality indicators (IQIs) and software algorithms to automatically assist in the verification of computed radiography (CR) image quality for nondestructive testing (NDT) of military airframes.Compared to existing IQIs and methods, the new approaches will more comprehensively, ...
SBIR Phase II 2015 Department of DefenseAir Force -
Unique Selected Area Deposition o Copper Onto Aluminum for Multichip Module Applications
SBC: Brewer Science Incorporated Topic: N/AThe inability to deposit copper directly onto aluminum is a longstanding problem in microelectronic manufacturing. Presently, aluminum must be coated with a barrier layer such as TiN to promote copper adhesion and provide good electrical contact between the two metals. This work will demonstrate a nonaqueous galvanic process for selectively depositing a highly adherent copper coating directly o ...
SBIR Phase I 1997 Department of DefenseAir Force -
Portable Auditory Diagnostic System
SBC: Kedly, Inc. Topic: N/AKedley Incorporated proposes to develop a prototype portable auditory diagnostic device capable of implementing 5 major auditory diagnostic tests including pure-tone audiometry, speech audiometry, tympanometry, distortion product otoacoustic emissions, and evoked auditory brainstem potentials. These tests are now implemented with 4 separate, large and combersome devices that often share the same ...
SBIR Phase I 1997 Department of DefenseAir Force -
Intelligent Semantic Integration of Graphics Objects and Text
SBC: VAN HOUTEN TECHNOLOGIES, INC. Topic: N/AThe objective of this research is to significantly reduce the human intervention required to link text and graphics. Many current research efforts have focused on linking text to graphics objects by: (1) developing textual graphics descriptors which can be used to identify graphics objects and (2) developing methods for linking, interpreting, and integrating text to graphics. This effort prop ...
SBIR Phase I 1997 Department of DefenseAir Force