You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. LONG TAPER HONE

    SBC: C K Technologies LLC            Topic: N/A

    The proposed project will develop an advanced control system (software and related hardware) and adapt this control system to a well developed and commercially available honing machine. The resultant system will be capable of producing controlled inside cylinder geometries with controlled taper and cylinder size along the length of a cylinder bore on a controlled basis. The desired geometry (diame ...

    SBIR Phase I 1994 Department of DefenseAir Force
  2. Advanced Composites Recycling/Reuse Program

    SBC: ENVIRONMENTAL ENGINEERING GROUP, INC.            Topic: N/A

    Advanced composites usage has grown ever since their introduction in the l970's. Consequently, a large volume of advanced composites waste has been generated over the years because of the high scrap rate (two-to-one) in composite production. The prevalent method of disposal into landfills is becoming prohibitive due to increased cost, negative public opinion, and legislation. This project will add ...

    SBIR Phase I 1994 Department of DefenseAir Force
  3. Fast and Robust Algorithms for Process Modeling of Ceramic Matrix Composite Processing Simulation

    SBC: MO-SCI Corp.            Topic: N/A

    It is proposed to develop and validate fast and robust algorithms and computer codes to simulate the processing of ceramic matrix composites. While the processing and parameters that control the efficient manufacturing of ceramic matrix composites can be studied experimentally, a validated mathematical model that accounts for the microstructural and processing parameters is a very economical and u ...

    SBIR Phase I 1994 Department of DefenseAir Force
  4. LOW COST MAGNETIC ATTITUDE HEADING REFERENCE SYSTEMS (M-AHRS) FOR AUTONOMOUS FLIGHT VEHICLES EFFEC

    SBC: KVH INDUSTRIES, INC.            Topic: N/A

    The purpose of the Phase I work is to identify the best packaging concept for the Hall Effect device and to deterinine the feasibility of building it. KVH proposes to test and characterize the NWC Hall Effect Breadboard and to generate a packaging feasibility study. KVH will use unique, proprietary capabilities, including a free standing Triaxial Helmholtz Cage to evaluate the NWC concept. KVH wil ...

    SBIR Phase II 1994 Department of DefenseNavy
  5. Propulsion/Navigation Integrated Universal Driver's Display Unit (UDD)

    SBC: KVH INDUSTRIES, INC.            Topic: N/A

    KVH Industries proposes to develop a proof-of-principle Universal Driver's Display (UDD) for the Amphibious Assault Vehicle (AAV7A1). The UDD will comprise a flat-faced, color-capable screen with co-located electronics and integrated with engine sensors and the magnetic compass. We will use our commercial Quadro "PowerWatch"TM digital instrument system hardware for the proof-of-principle system. T ...

    SBIR Phase I 1994 Department of DefenseNavy
  6. Triaxial Fluxgate Azimuth Sensor with Three-Dimensional Autocalibration Capability

    SBC: KVH INDUSTRIES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseNavy
  7. Optimized And Low Cost Praseodymim-doped Fluoride Fiber Optical

    SBC: Optigain, Inc            Topic: N/A

    WE PROPOSE TO DEVELOP OPTIMIZED, HIGH PERFORMANCE AND LOW COST FIBER OPTICAL AMPLIFIERS FOR USE IN THE 1300 NM SIGNAL WAVELENGTH. WE PLAN TO SHOW THE FEASIBILITY OF OUR APPROACH BY CARRYING OUT MEASUREMENTS IN AN ASSEMBLED LABORATORY SET-UP. WE WILL COMPARE THESE RESULTS WITH OUR THEORETICAL PREDICTIONS WITH A COMPUTER MODEL, CALLED MEDAL. THIS MODEL HAS PROVEN ACCURATE WITH OUR WORK ON ERBIUM-DOP ...

    SBIR Phase II 1994 Department of DefenseMissile Defense Agency
  8. THULIUM DOPED FLUORIDE FIBER AMPLIFIER FOR USE IN THE 800NM SIGNAL BAND

    SBC: Optigain, Inc            Topic: N/A

    We propose to develop an optimized, high performance and low-cost fiber optical amlifier for use in the 800 nm signal wavelength band. The rare-earth dopant will be thulium (Tm) and the host fiber composition will be a heavy metal fluoride glass (ZBLAN). This amplifier, labeled TDFFOA, or a Thulium-Doped Fluoride Fiber Optical Amplifier, will become a key component in various lightwave systems, pr ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  9. ERBIUM-TERBIUM CO-DOPED FLUORIDE FIBER OPTICAL AMPLIFIER OPERATING IN 850NM SIGNAL BAND

    SBC: Optigain, Inc            Topic: N/A

    We propose to develop for the first time, a high performance, low noise amplifier in the 850 nm signal band using a Erbium-Terbium co-doped active fiber. Erbium-Terbium co-doped fiber optical amplifiers (ETCFOA) will be key components for short haul communication systems in the first telecommunication window and other dual-use technologies. This communication window is of particular interest becau ...

    SBIR Phase I 1994 Department of DefenseMissile Defense Agency
  10. Non-Invasive Communications with Embedded Sensors in Composites

    SBC: PRODUCTION PRODUCTS MANUFACTURING & SALES CO., INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government