You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. A Broadly Tunable Ultrashort Pulse IR OPO Pumped by a Mode-Locked

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    We propose to develop an innovative, compact ultrafast high brightness laser source, broadly tunable in the infrared for vibrationally-resolved infrared microscopy and other applications. By passive Kerr lens mode-locking of a novel diode-pumped tunable Cr:LiSAF laser, 100fs pulses will be generated at 100 MHZ repetition rate with an average power of 1W. An optical parametric oscillator (OPO) pump ...

    SBIR Phase I 1997 Department of Commerce
  2. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase I 2003 Department of DefenseOffice of the Secretary of Defense
  3. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase II 2003 Department of DefenseOffice of the Secretary of Defense
  4. Accessible Virtual Reality for Machinist Training Modules

    SBC: Microcompatibles, Inc.            Topic: N/A

    This proposal will emphasize outfitting a virtual classroom and creating a skills (CNC) oriented training program. The virtual classroom will involve contextual learning using a realistic simulation of the manufacturing environment. The simulation will have all of the characteristics of a machine shop, but will allow the learner to explore and experiment ("discover") in ways that would not be pr ...

    SBIR Phase I 1995 Department of Commerce
  5. A Computational Tool for Simulating Hydrodynamic Behavior of Multiple Vessels in a Harbor

    SBC: DYNAFLOW, INC            Topic: N/A

    The hydrodynamic characteristics of a vessel are affected in restricted waters by the proximity of nearby moving or moored vessels. Interactions can result in large motions, potential collisions and significant loads on nearby structures, banks, and sediments. In Phase 1, we developed and demonstrated feasibility of a PC-Based numerical code for the prediction of the hydrodynamics of multiple vess ...

    SBIR Phase I 2002 Department of Commerce
  6. A Computational Tool for Simulating Hydrodynamic Behavior of Multiple Vessels in a Harbor

    SBC: DYNAFLOW, INC            Topic: N/A

    The hydrodynamic characteristics of a vessel are affected in restricted waters by the proximity of nearby moving or moored vessels. Interactions can result in large motions, potential collisions and significant loads on nearby structures, banks, and sediments. In Phase 1, we developed and demonstrated feasibility of a PC-Based numerical code for the prediction of the hydrodynamics of multiple vess ...

    SBIR Phase II 2002 Department of Commerce
  7. A 3-D Machine Tool Error Modeling System

    SBC: Automated Precision Inc.            Topic: N/A

    In response to the increasing demand for better understanding of the manufacturing processes and the machining systems, a new testing standard--ASME B5.54 and a family of new testing instruments have been developed for evaluating the performances of a variety of CNC machining centers. Because of the advancement and versatility of the new instruments, test data are being collected at a much higher ...

    SBIR Phase I 1997 Department of Commerce
  8. ADVANCED FIRE DETECTION BASED ON COMBINED CONVENTIONAL SMOKE AND CO SENSORS

    SBC: HUGHES ASSOC., INC.            Topic: N/A

    CURRENT SMOKE DETECTION TECHNOLOGIES SUFFER FROM SIGNIFICANT FALSE ALARM RATES. THESE PROBLEMS ARE CURRENTLY BEING ADDRESSED BY REDUCING THE SENSITIVITY OF EXISTING PARTICULATE DETECTORS. IN THIS WORK, THE FEASIBILITY OF A COMBINED PARTICULATE AND CARBON MONOXIDE DETECTOR WILL BE EVALUATED. THE USE OF MULTIPLE FIRE SIGNATURES HAS THE POTENTIAL FOR REDUCING THE FALSE ALARM PROBLEMS WHILE INCREASING ...

    SBIR Phase II 1994 Department of Commerce
  9. ADVANCED FIRE DETECTION BASED ON COMBINED CONVENTIONAL SMOKE AND CO SENSORS

    SBC: HUGHES ASSOC., INC.            Topic: N/A

    N/A

    SBIR Phase I 1993 Department of Commerce
  10. ADVANCED SCANNING TUNNELING MICROSCOPE

    SBC: R D Young Consultants Inc            Topic: N/A

    THE SCANNING TUNNELING MICROSCOPE IS AN EVOLVING INSTRUMENT FOR MICROTOPOGRAPHIC MAPPING AND CHEMICAL ANALYSIS OF REFINED SURFACES WITH RESOLUTION ON THE ATOMIC SCALE. THE GOAL OF THIS CONTRACT IS TO PROVIDE A NEW AND INNOVATIVE DESIGN FOR THE STM, EXTENDING ITS FLEXIBILITY AND ACCURACY. MORE SPECIFICALLY, THE DESIGN GOALS ARE: 1) TO PROVIDE A COMPACT INSTRUMENT SUITABLE FOR VACUUM FLANGE MOUNTING ...

    SBIR Phase I 1987 Department of Commerce
US Flag An Official Website of the United States Government