You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Visual Ontological Language for Technical Standards (VOLTS)

    SBC: Aztera, LLC            Topic: 9010273R

    Current research shows that failures in the standardization process are often the result of a failure of the participants to communicate or organize. To this effect, NIST has developed a tool, NIST Ontological Visualization Interface for Standards (NOVIS), with an environment for visualizing, browsing, and querying standards. Aztera will create a Computer Aided Standards Development (CASD) framewo ...

    SBIR Phase I 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  2. High-Throughput Low-Cost Manufacturing of Engineered MRI Contrast Agents

    SBC: WEINBERG MEDICAL PHYSICS, INC.            Topic: 9010368R

    Scalable manufacturing of micro-engineered MRI contrast agents has the potential to increase the specificity and resolution of imaging techniques, while reducing morbidity. Currently, techniques used for making such particles are expensive and labor intensive. In Phase I, Weinberg Medical Physics will validate techniques for rapid, massively parallel fabrication of microscale contrast agents (incl ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  3. High Performance Beam Scanning Using a Resonant Scan Lens

    SBC: XSB INC            Topic: 9050140TT

    The objective of this project is to demonstrate a resonant scan lens (RSL) that increases the uniformity of beam scans projected from resonant optomechanical systems. While resonant optomechanical systems generate high-speed beam scans, large mechanical displacements, and robust operation from miniature form factors, scans projected from such systems lack uniformity across the field-of-view (FOV). ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  4. New METSAT Display Service for Weather-Ready Nation

    SBC: CARR ASTRONAUTICS CORP            Topic: 843WP

    Phase II of the New METSAT Display project will produce a working beta version of the Earth Imaging product customized for NWS/NOAA as outlined in the Phase I proof of concept. This product will ingest imagery from a data source (in this case a web service of NOAA satellite imagery) and display it accurately on a globe of the Earth. Vector data such as roads, cities, towns, counties, states, etc. ...

    SBIR Phase II 2015 Department of CommerceNational Oceanic and Atmospheric Administration
  5. DLA152-001

    SBC: Response Technologies, LLC            Topic: DLA152001

    The DoD uses flexible fuel bladders in multiple air, ground, and sea vehicles because: 1) they easily fit into almost any space, 2) they are corrosion proof, and can often be self-sealing and explosion proof, 3) they allow for customized placement of fittings and connection points, 4) they collapse as they empty, thereby eliminating the need for venting and minimizing fuel sloshing and its associa ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  6. Advanced Manufacturing Technologies

    SBC: ADVANCED CERAMICS MANUFACTURING, LLC            Topic: DLA152001

    A new approach to manufacturing is needed to streamline the logistics of maintaining legacy aircraft. Recently, Advanced Ceramics Manufacturing (ACM) developed a water soluble tooling technology (FastCore) that can reduce the cost of Fiber Reinforced Plastics (FRP) composite components. The FastCore family of products allows ACM to rapidly create water soluble mandrels for composite manufacturer ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  7. Additive Manufactured Cored Shells for Investment Casting

    SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC.            Topic: DLA152003

    In this Phase I SBIR project TA&T will use ceramic stereolithography to fabricate integrally cored shells for investment cast turbine airfoils with the goals of demonstrating dimensional accuracy specifications can be met and demonstrating castability of a legacy airfoil. The application target will be advanced high pressure turbine (HPT) airfoils cast in single crystal superalloys, the most diffi ...

    SBIR Phase I 2015 Department of DefenseDefense Logistics Agency
  8. An Automated Lapping Apparatus and Process for High-Precision Random Profile Roughness Specimen Fabrication

    SBC: X-Wave Innovations, Inc.            Topic: 9020268TT

    The measurement and quality control for smooth engineering surfaces are becoming more and more important in modern science and technology due to their important engineering functions and high production costs. NIST has frequently received requests from U.S. industry to provide Standard Reference Material (SRM) high-precision, random profile roughness specimens to support smooth surface measurement ...

    SBIR Phase II 2013 Department of CommerceNational Institute of Standards and Technology
  9. High-Sensitivity, Low-Cost, Surface-Acoustic-Wave Based Microscale Thermogravimetric Analyzer for Nanoparticle Characterization

    SBC: X-Wave Innovations, Inc.            Topic: N/A

    To meet NIST’s need for development of a new electronic system for microscale thermogravimeter nanoparticle analysis, X-wave Innovations, Inc. (XII) proposes a high-sensitivity, high-accuracy, low-cost, surface-acoustic-wave based microscale thermogravimetric analyzer (SAW-µ-TGA). The proposed approach is based on XII-developed surface acoustic wave (SAW) sensor technology, which is capable of ...

    SBIR Phase I 2013 Department of CommerceNational Institute of Standards and Technology
  10. Climate Impact Visualization Tools Using Virtual 3D City for Community Based Planning and Outreach

    SBC: Intelligent Automation, Inc.            Topic: 931RC

    Intelligent Automation, Inc. proposes an innovative visualization tool that transforms online GIS mappers into a climate impact assessment and planning tool that allows planners to visualize the impact of storm surges with sea level rise and coastal erosion using a 3D virtual city. The goal is to assist planners and emergency services to adapt to climate change at three tiers: i) Tier 3 (Long-te ...

    SBIR Phase I 2013 Department of CommerceNational Oceanic and Atmospheric Administration
US Flag An Official Website of the United States Government