Award Data

NIST's seeks a high resolution DIC technology for qualification of complex AM parts. To meet this critical need, X-wave Innovations Inc. proposes to develop a 3-Dimentional Digital Image Correlation (3-D DIC) based NDT system. The proposed effort builds upon the success of XII in developing a variety of NDT technologies (including DIC system) for advanced materials evaluation. The success of the p ...

The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the gas engine gives long ...

We propose an all-fiber approach to heat removal from devices such as IR and LWIR detectors and sensors. In our approach, the cooling fibersegment, the pump fiber laser, and the optical fiber used for photon waste removal are all integrated into a single fiber configuration. NPPhotonics' high efficiency fiber lasers are used to pump high purity doped glass fibers, which provide the cooling action ...

Physical Sciences Inc. (PSI) proposes to develop an open-path spatial ringdown spectrometer (OP-SRS) for the detection and quantification of chemical warfare agents (CWAs) and toxic industrial chemicals (TICs). This approach enables sensitive and selective detection of the chemicals of interest over a broad dynamic range down to the 10 minute negligible military exposure guideline (MEG) level. Thi ...

With the global reach of our US military and civilian population, the threat of CB warfare, and spread of deadly viruses in the world; it isnecessary to have containment options for large scale transport of hazardous/contaminated materials that meet the strict national,international and US Air Force standards for air transport. Production Products has addressed this need with the development of an ...

We propose to develop low cost extended range Short Wave Infrared (SWIR) Focal Plane Arrays (FPAs) using Colloidal Quantum Dots (CQDs) technology. We have successfully produced a SWIR FPA camera with a resolution of 640 x 512 pixels and a sensitivity from 0.4 mm to 1.7 mm at room temperature. Our first initiative will be to extend the operational wavelength range to 2.5 mm, and then 3.0 mm. We hav ...

Current research shows that failures in the standardization process are often the result of a failure of the participants to communicate or organize. To this effect, NIST has developed a tool, NIST Ontological Visualization Interface for Standards (NOVIS), with an environment for visualizing, browsing, and querying standards. Aztera will create a Computer Aided Standards Development (CASD) framewo ...

Scalable manufacturing of micro-engineered MRI contrast agents has the potential to increase the specificity and resolution of imaging techniques, while reducing morbidity. Currently, techniques used for making such particles are expensive and labor intensive. In Phase I, Weinberg Medical Physics will validate techniques for rapid, massively parallel fabrication of microscale contrast agents (incl ...

The objective of this project is to demonstrate a resonant scan lens (RSL) that increases the uniformity of beam scans projected from resonant optomechanical systems. While resonant optomechanical systems generate high-speed beam scans, large mechanical displacements, and robust operation from miniature form factors, scans projected from such systems lack uniformity across the field-of-view (FOV). ...

Phase II of the New METSAT Display project will produce a working beta version of the Earth Imaging product customized for NWS/NOAA as outlined in the Phase I proof of concept. This product will ingest imagery from a data source (in this case a web service of NOAA satellite imagery) and display it accurately on a globe of the Earth. Vector data such as roads, cities, towns, counties, states, etc. ...