You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
D2R: A Mobile App for Efficient Disposition to Reutilization
SBC: Intelligent Automation, Inc. Topic: DLA162003DLA Disposition Services is responsible for the disposal of excess DOD personal property, foreign excess personal property, scrap, hazardous waste, and property requiring demilitarization. DLA Disposition Services also offers reutilization and public sales to military, federal, state and local agencies, non-profit agencies, and US taxpayers through a marketplace. In the current process, the user d ...
SBIR Phase I 2017 Department of DefenseDefense Logistics Agency -
Precision 10 kV Programmable Voltage Source
SBC: Low Thermal Electronics, Inc. Topic: NALow Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...
SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology -
3-D Digital Image Correlation Based Non-Destructive Testing System for Qualification of Additive Manufacturing Parts
SBC: X-Wave Innovations, Inc. Topic: NANIST's seeks a high resolution DIC technology for qualification of complex AM parts. To meet this critical need, X-wave Innovations Inc. proposes to develop a 3-Dimentional Digital Image Correlation (3-D DIC) based NDT system. The proposed effort builds upon the success of XII in developing a variety of NDT technologies (including DIC system) for advanced materials evaluation. The success of the p ...
SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology -
Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon
SBC: OMEGA OPTICS, INC. Topic: NAWe propose a fiber-pigtailed strained silicon platform for tunable difference frequency generation (DFG) in mid-infrared (MIR) with tunable continuous wave near-infrared (NIR) sources. Stress exerted by silicon nitride induces second-order nonlinear susceptibility c(2) on underlying centro-symmetric silicon. NIR light is coupled into silicon and MIR light is coupled out of silicon using sub-wavele ...
SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology -
HQ-55 VTOL UAS for Ship Based Operation
SBC: L3 Latitude, LLC Topic: 832The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the gas engine gives long ...
SBIR Phase I 2017 Department of CommerceNational Oceanic and Atmospheric Administration -
High Stability Atmospheric Carbon Dioxide and Methane Analyzer
SBC: LI-COR, Inc. Topic: 832DLI-COR proposes to continue development of a next-generation CO2/CH4/H2O analyzer that will offer an unprecedented combination of high precision and stability, making it the first highperformance gas analyzer suitable for long-term unattended operation. The instrument will be smaller, lighter, and far less expensive than competing technologies. LI-COR’s approach exploits a proprietary, revolutio ...
SBIR Phase II 2017 Department of CommerceNational Oceanic and Atmospheric Administration -
SoldierBoost, Nutrient-Dense Soldier Food Supplement
SBC: Systems & Materials Research Corporation Topic: DLA163001Soldiers engaged in high intensity operations can burn up to 4,500 kcal of energy per day, which cannot be compensated for by current rationsMeals Ready to Eat (MREs) and First Strike Rations (FSRs) only provide up to 3,750 kcal/day and 2,900 kcal/day, respectively. This energy debt is further aggravated by the fact that most soldiers field strip their MREs, removing menu items that are undesirabl ...
SBIR Phase I 2017 Department of DefenseDefense Logistics Agency -
Reverse Engineering Technical Data Packages- Light Assembly, INDI 016310018
SBC: Breault Research Organization, Inc. Topic: DLA171002The trend over the last several years is fewer businesses supplying manufactured products. Thus, by supply and demand, the cost of military hardware has increased with less competition. Furthermore, amortized cost of the qualifying a new product becomes cost prohibited resulting in non-competitive bids compared to historical averages. DLAs Replenishment Parts Purchase or Borrow program supports re ...
SBIR Phase I 2017 Department of DefenseDefense Logistics Agency -
Ceramic Additive Manufacturing for Metal Castings
SBC: TECHNOLOGY ASSESSMENT AND TRANSFER, INC. Topic: DLA152003Additive manufacturing of integrally cored ceramic molds promises substantial cost savings and much shorter development cycles for the cooled blades and vanes of the high pressure turbine section of aircraft engines. AM directly prints the ceramic mold and core as a monolithic body, thereby eliminating the major steps of ceramic core and wax pattern fabrication. Based on a cost analysis conducte ...
SBIR Phase II 2017 Department of DefenseDefense Logistics Agency -
ExtruMach-Mill
SBC: FAIRMOUNT TECHNOLOGIES LLC Topic: DLA152001Fairmount Technologies (FT) has demonstrated that ExtruMach is a disruptive technology for drilling curved extrusions and proposes to further develop this during Phase II for milling extrusions. ExtruMach-PoCM (proof of concept machine) is a flow-type multi-axis CNC machine with a small footprint, which is more capable than existing machines in that it has no limit on the length of parts it can ha ...
SBIR Phase II 2017 Department of DefenseDefense Logistics Agency