You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optimum Control of Induction Generators for Water Current Energy Harnessing

    SBC: Electro Standards Laboratory, Inc.            Topic: 815

    Optimization of generator performance and maximization of output power are difficult to attain in the generation of hydro-power. This is due to the changing water conditions and corresponding changes in the form of available energy. ESL proposes to use self-tuning controls in combination with a suitably chosen and optimized generator driven by hydro-energy and condition it for distribution to then ...

    SBIR Phase I 2010 Department of Commerce
  2. Efficient Processing Using New Cell Disruption Method

    SBC: ENIGMATICS, INC.            Topic: 815

    The proposed effort is aimed at the development of a new low-cost technique for extracting the fuel precursor components from marine alga cells. The effort is aimed at reducing the total production costs of alga-derived fuels, up to one-half of which may be attributed to the recovery/extraction process alone. Development of advanced processing technologies such as that proposed here is necessary i ...

    SBIR Phase I 2010 Department of Commerce
  3. Photoacoustic Sensor for High-sensitivity Measurement of Water Vapor

    SBC: MASSTECH, INC.            Topic: 824

    We propose to build a compact, rugged airborne laser photoacoustic spectrometric (LPAS) sensor based on a tunable mid-IR diode laser for continuous, real-time measurements of water vapor, and perform field tests to qualify it for dynamic airborne in situ monitoring of upper troposphere water vapor. An innovative diode laser frequency locking technique developed by us will be utilized for tunable d ...

    SBIR Phase I 2010 Department of Commerce
  4. Non-Marine-Based Fishmeal and Fish Oil Replacement Strategies for the Production of Aquaculture Feed

    SBC: ABN            Topic: 841

    If aquaculture is to become an increasing contributor to the food supply, it is critical that aquaculture feeds become less reliant on marine-derived fishmeal and fish oil as the preferred source of essential proteins and lipids. Not only is the wild fishery from which these products are extracted at maximum sustainable levels of harvest, but also there is increasing concern that these feedstocks ...

    SBIR Phase I 2004 Department of Commerce
  5. Non-Marine-Based Fishmeal and Fish Oil Replacement Strategies for the Production of Aquaculture Feeds

    SBC: ABN            Topic: N/A

    If aquaculture is to become an increasing contributor to the food supply, it is critical that aquaculture feeds become less reliant on marine-derived fishmeal and fish oil as the preferred source of essential proteins and lipids. Not only is the wild fishery from which these products are extracted at maximum sustainable levels of harvest, but also there is increasing concern that these feedstocks ...

    SBIR Phase II 2005 Department of Commerce
  6. Natural and Sustainable Alternatives for Fish Meal/Oil Usage in Atlantic Salmon Feeds

    SBC: ABN            Topic: 8110

    The aquaculture industry currently consumes 70 percent of the global production of fish oil and 35 percent of total fishmeal. The salmon and trout fish farming sectors alone consume over one half of the world¿s fish oil. And if fish farming continues to grow at the current rate, then by 2010 the aquaculture industry could well be using all of the world¿s fish oil and half of its fishmeal. The ...

    SBIR Phase I 2005 Department of Commerce
  7. Reuse Support Tools for Automated Constructino of Software Systems

    SBC: Advanced Systems Technology, Inc.            Topic: N/A

    Reuse in software engineering is an exciting concept that has yet to be reliably implemented. The number of program subroutines that are truly generic (and therefore applicable across all applications) is limited. However, there are specific applications that are required by many organizations, albeit with a set of constraints specific to each organization. This project proposes to design a too ...

    SBIR Phase I 1995 Department of Commerce
  8. Vessel Launched Unmanned Aircraft System for Marine Debris Detection and Tracking

    SBC: Airborne Technologies, Inc.            Topic: 843

    Airborne Technologies, Inc. Phase II effort will be to build and demonstrate a low-cost marinized Unmanned Aircraft System (UAS) that can be operated easily from small or large vessels and is capable of reliable and repeatable operations in an ocean environment. The UAS will be utilized for the detecting and tracking of marine debris, sea-life or other objects in the open ocean. The system inclu ...

    SBIR Phase II 2009 Department of Commerce
  9. Vessel Launched Unmanned Aerial System for Marien Debris Detection and Tracking

    SBC: Airborne Technologies, Inc.            Topic: 843

    Airborne Technologies, Inc. Phase I effort will be to design and demonstrate the feasibility of developing a low-cost, marinized Unmanned Aerial System (UAS) that can be operated easily from small or large vessels and is capable of reliable and repeatable operations in an ocean environment. The UAS will be utilized for the detecting and tracking of marine debris, sea-life or other objects in the ...

    SBIR Phase I 2008 Department of Commerce
  10. A 3-D Machine Tool Error Modeling System

    SBC: AUTOMATED PRECISION, INC.            Topic: N/A

    In response to the increasing demand for better understanding of the manufacturing processes and the machining systems, a new testing standard--ASME B5.54 and a family of new testing instruments have been developed for evaluating the performances of a variety of CNC machining centers. Because of the advancement and versatility of the new instruments, test data are being collected at a much higher ...

    SBIR Phase I 1997 Department of Commerce
US Flag An Official Website of the United States Government