List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. 3-D Digital Image Correlation Based Non-Destructive Testing System for Qualification of Additive Manufacturing Parts

    SBC: X-Wave Innovations, Inc.            Topic: NA

    NIST's seeks a high resolution DIC technology for qualification of complex AM parts. To meet this critical need, X-wave Innovations Inc. proposes to develop a 3-Dimentional Digital Image Correlation (3-D DIC) based NDT system. The proposed effort builds upon the success of XII in developing a variety of NDT technologies (including DIC system) for advanced materials evaluation. The success of the p ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  2. 300 mm High Density Temperature Probe Card for Wafer- Level Reliability Testing

    SBC: Celadon Systems Inc.            Topic: N/A

    Historical methods of reliability assessment are less and less effective as device sizes shrink. Already researchers are unable to package the many advanced devices because the act of cutting the wafer and the packaging operation pre-stresses or destroys the devices resulting in unreliable test results. Additionally the increasing cost of fabricating a wafer with advanced integrated circuit techno ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  3. A 3-D Machine Tool Error Modeling System

    SBC: AUTOMATED PRECISION INC.            Topic: N/A

    In response to the increasing demand for better understanding of the manufacturing processes and the machining systems, a new testing standard--ASME B5.54 and a family of new testing instruments have been developed for evaluating the performances of a variety of CNC machining centers. Because of the advancement and versatility of the new instruments, test data are being collected at a much higher ...

    SBIR Phase I 1997 Department of Commerce
  4. A Broadly Tunable Ultrashort Pulse IR OPO Pumped by a Mode-Locked

    SBC: SCIENCE & ENGINEERING ASSOC., INC.            Topic: N/A

    We propose to develop an innovative, compact ultrafast high brightness laser source, broadly tunable in the infrared for vibrationally-resolved infrared microscopy and other applications. By passive Kerr lens mode-locking of a novel diode-pumped tunable Cr:LiSAF laser, 100fs pulses will be generated at 100 MHZ repetition rate with an average power of 1W. An optical parametric oscillator (OPO) pump ...

    SBIR Phase I 1997 Department of Commerce
  5. A Computational Tool for Simulating Hydrodynamic Behavior of Multiple Vessels in a Harbor

    SBC: DYNAFLOW, INC            Topic: N/A

    The hydrodynamic characteristics of a vessel are affected in restricted waters by the proximity of nearby moving or moored vessels. Interactions can result in large motions, potential collisions and significant loads on nearby structures, banks, and sediments. In Phase 1, we developed and demonstrated feasibility of a PC-Based numerical code for the prediction of the hydrodynamics of multiple vess ...

    SBIR Phase I 2002 Department of Commerce
  6. A Computational Tool for Simulating Hydrodynamic Behavior of Multiple Vessels in a Harbor

    SBC: DYNAFLOW, INC            Topic: N/A

    The hydrodynamic characteristics of a vessel are affected in restricted waters by the proximity of nearby moving or moored vessels. Interactions can result in large motions, potential collisions and significant loads on nearby structures, banks, and sediments. In Phase 1, we developed and demonstrated feasibility of a PC-Based numerical code for the prediction of the hydrodynamics of multiple vess ...

    SBIR Phase II 2002 Department of Commerce
  7. A Dynamic Bulk Modulus/PVT Apparatus for Characterization of Polymers

    SBC: Radix Systems, Inc.            Topic: N/A

    Currently, advanced tools for modeling injection modeling of thermoplastics and predicting formed part dimensional stability and residual stress content use the static bulk modulus of the polymer at the temperatures and pressures associated with the molding process. The short cycle times associated with injection molding, however, could be more accurately modeled if dynamic bulk modulus data were ...

    SBIR Phase I 1996 Department of Commerce
  8. A Gated LFMCW TDMA MIMO SAR based Hidden Chamber Detector

    SBC: INTELLIGENT FUSION TECHNOLOGY, INC.            Topic: SOCOM173004

    This proposal presents a gated LFMCW TDMA MIMO SAR based hidden chamber detector. The proposed system is constructed with (1) a gated linear frequency modulated continuous wave (LFMCW) time division multiple access (TDMA) multiple input multiple output (MIMO) synthetic aperture radar (SAR), (2) an inertial measurement unit (IMU), (3) a data processor, (4) a set of laser indicators, and (5) a monit ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  9. A High Sensitivity, High Resolution Imaging Detector for Alpha Particles

    SBC: NewTek            Topic: N/A

    The storage photostimulable phosphor (SPP) technique has been demonstrated to be sensitive to ionization radiation. It is especially suited for detecting alpha particles since the efficiency is practically 100%. In addition to being able to quantify total ionization deposited in a SPP sensor, it also captures the radiation source distribution information in a digital image which can be readily ana ...

    SBIR Phase I 1997 Department of Commerce
  10. A Micro-Electroformed Cross Capacitor (MECC)

    SBC: RESEARCH SUPPORT INSTRUMENTS, INC.            Topic: N/A

    Utilizing new hard, etch resistant photoresists derived from epoxy formulations such as SU-8 to serve as the mold for electroless metaldeposition for MEMS electroforming techniques, a fully micro-miniaturized cross capacitor can be realized. A Micro-Electroformed Cross Capacitor (MECC) is built by electroforming high aspect metals atop the substrate. A Phase 1 effort would model MECC performance, ...

    SBIR Phase I 2002 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government