You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Non-Marine-Based Fishmeal and Fish Oil Replacement Strategies for the Production of Aquaculture Feeds

    SBC: ABN            Topic: N/A

    If aquaculture is to become an increasing contributor to the food supply, it is critical that aquaculture feeds become less reliant on marine-derived fishmeal and fish oil as the preferred source of essential proteins and lipids. Not only is the wild fishery from which these products are extracted at maximum sustainable levels of harvest, but also there is increasing concern that these feedstocks ...

    SBIR Phase II 2005 Department of Commerce
  2. Natural and Sustainable Alternatives for Fish Meal/Oil Usage in Atlantic Salmon Feeds

    SBC: ABN            Topic: 8110

    The aquaculture industry currently consumes 70 percent of the global production of fish oil and 35 percent of total fishmeal. The salmon and trout fish farming sectors alone consume over one half of the world¿s fish oil. And if fish farming continues to grow at the current rate, then by 2010 the aquaculture industry could well be using all of the world¿s fish oil and half of its fishmeal. The ...

    SBIR Phase I 2005 Department of Commerce
  3. The Design of a Low Cost, Rapidly Deployable, Sirborne Harmful Algal Bloom Identification Technology (HABIT) Sensor

    SBC: Aethon Intelligence, LLC            Topic: 834

    The optimal design for a rapidly-deployable, airborne HAB identification sensor requires the determination of the minimum spectral, spatial, dynamic range, and deployment capabilities necessary to achieve the goal of operational detection. This sensor must be capable of rendering a positive identification, with a low false alarm rate, in optical shallow waters, where the bottom is visible in the ...

    SBIR Phase I 2005 Department of Commerce
  4. Low Noise, High Efficiency InGaAs/InAIAs Avalanche Photodiodes for Photon Counting at 1.55 Micrometer Wavelength

    SBC: COVEGA, INC.            Topic: 8312

    A large area (diameter > 200 micrometer) mesa type InGaAs/InAlAs avalanche photodiode with a novel surface passivation technique is proposed for photon counting at eye-safe wavelength of > 1.4 micrometer. The device is expected to exhibit high detection efficiency, low dark count rate with minimal afterpusling, due to the small k factor of InAlAs gain material and the unique mesa sidewall treatmen ...

    SBIR Phase I 2005 Department of Commerce
  5. Cavitating Jets for Aquaculture Wast Treatment and Recycling

    SBC: DYNAFLOW, INC.            Topic: 816

    Concentrated aquatic animal production facilities (CAAP) have recently fallen under new EPA effluent limitations. Compliance with these guidelines creates the opportunity to improve effluent and recycled water quality. Cavitation caused by our FYNAJETS and the collapse of micro-bubbles in water is a low energy, high efficiency method of applying thermal and mechanical stress and chemical oxidati ...

    SBIR Phase I 2005 Department of Commerce
  6. Head-up Vessel Navigation Using Raster/Vector Data

    SBC: GMA INDUSTRIES, INC.            Topic: 851

    This project entails a comprehensive approach to developing an innovative solution to heads-up display navigation for marine vessels that addresses the required hardware, the sources of raster and vector navigation and marine charting data, and the means to convey these data to watch standers on the bridge in a manner that enhances their performance. During Phase I we identify specific heads-up d ...

    SBIR Phase II 2005 Department of Commerce
  7. Active Mixing of Polymers in a Dispensing Head

    SBC: nScrypt, Inc.            Topic: N/A

    A method to take three polymers with varying viscosities and mixing those polymers together at the point of interest or more specifically through a micro dispensing nozzle, is being proposed. An active mixing scheme to ensure proper mixing at the pen tip is a feasible approach to this problem. The materials being mixed will not only range in viscosity but also in particle loading, which will be ha ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. Ultra-High Vacuum Compatible Wavelength Dispersive X-ray Spectrometer

    SBC: PARALLAX RESEARCH INC            Topic: N/A

    Parallax Research, Inc. proposes to build an Ultra-High Vacuum compatible Wavelength Dispersive X-ray Spectrometer (WDS) that can be used on small spot Auger, XPS, TEM and FESEM analytical instruments for elemental analysis. The effort draws upon Parallax's experience in designing WDS systems for Scanning Electron Microscopes (SEM) and for XRF. This new type of x-ray spectrometer will eliminate th ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  9. N/A

    SBC: Epitaxial Technologies, LLC            Topic: N/A

    N/A

    SBIR Phase I 2000 Department of Commerce
  10. Innovative Manufacturing Methods for Diamond Indenters

    SBC: Gilmore Diamond Tools, Inc.            Topic: N/A

    N/A

    SBIR Phase II 2000 Department of Commerce
US Flag An Official Website of the United States Government