You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Efficient Adaptive Beamforming for Missile Defense Radars

    SBC: Applied Radar, Inc.            Topic: MDA06033

    The detection and classification of reentry vehicles in the presence of jammers and clutter is a very important missile defense radar problem. High resolution, wideband adaptive beamforming (ADBF) is an important solution component in which both the transmit and receive beamforming weight vectors are dynamically updated to optimize performance in a time varying jammer and clutter environment. An i ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  2. Development of Digital Receiver/Exciters for Missile Defense Radars

    SBC: Applied Radar, Inc.            Topic: MDA06032

    This proposal will address the development of digital receivers and exciters capable of supporting > 1 GHz of instantaneous bandwidth (IBW). The technology will be used in large scalable BMD radar arrays employing a digital waveform generator and digital receiver at the analog input/output of each subarray panel. The receivers/exciters include the necessary up/downconversion and local oscillator c ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  3. Wideband Digital Beamforming for SPEAR

    SBC: Applied Radar, Inc.            Topic: MDA05034

    In the proposed Phase II effort, Applied Radar, Inc. will develop a wideband scaleable digital beamforming (DBF) processor capable of supporting > 1 GHz of instantaneous bandwidth (IBW). The new patented hardware architecture paradigm developed in Phase I is scaleable in the number of input channels, the number of output beams, and bandwidth. Hence, it is directly applicable to large BMD radars su ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  4. Coherent Distributed Aperture Enabled Active Electronically Steered Array (CDA-AESA)

    SBC: Applied Radar, Inc.            Topic: MDA07T011

    Our missile defense capability crucially depends on radar performance to detect, track and discriminate hostile targets. New radar designs being developed offer enhanced capability. However, a significant impediment to the deployment of these new radars is the high cost of active electronically scanned arrays (AESAs) and in particular the antennas upon which they are based. Together with our inter ...

    STTR Phase I 2007 Department of DefenseMissile Defense Agency
  5. Miniaturization of Thermoacoustic Expander for 50 mW Recuperative Coolers Run Below 40 K

    SBC: CRYOWAVE ADVANCED TECHNOLGIES INC            Topic: MDA06023

    The objective of this program is to demonstrate and miniaturize a new type of cryogenic expander, thermoacoustic expander (TAE), for space cryocoolers which provide the cooling power less than 50 mW and operate in the low temperature range between 40K and 10K for cooling SWIR, MWIR, and LWIR surveillance and interceptor systems. TAEs employ high energy acoustic waves generated with absolutely no m ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  6. Developing Solid Rocket Motor Insensitive Munitions Solutions for Impact and Rocket Propelled

    SBC: ENERCHEM LLC            Topic: MDA06038

    Enerchem proposes to develop and demonstrate innovative concepts to protect solid rocket motors from impact events. Specifically our ignition delay concept has the potential to mitigate the overpressure, fragmentation and collateral damage that is usually incurred upon bullet or fragment impact on large motors. This concept is part of a systems approach to meeting the IM requirements and is integ ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  7. Optimized Thermal Battery Heat Regulation

    SBC: Erigo Technologies LLC            Topic: MDA05022

    Thermal batteries are a power source for many MDA programs. As mission requirements push the limits of battery lifetime, optimizing the thermal insulation used in the batteries becomes increasingly important. Another design challenge is to create batteries with unconventional configurations for more efficient space utilization. Designers need flexible tools to assist them to meet these challeng ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
  8. Linear-mode, Wide FOV, Single Photon Counting APD Ladar Array

    SBC: Epitaxial Technologies, LLC            Topic: MDA06013

    The overall objective of the proposed SBIR program is to develop compact, low-cost, low power and ultra-high sensitivity semiconductor ladar photoreceivers with linear mode photon counting capabilities that will be at once capable of high image, range and angular resolution. Specifically, we will model, design, analyze, fabricate and test and demonstrate high sensitivity, high bandwidth, (1.0 GHz) ...

    SBIR Phase I 2007 Department of DefenseMissile Defense Agency
  9. Development of Dilute Nitride SL Technology for VLWIR Detectors

    SBC: Epitaxial Technologies, LLC            Topic: MDA06T011

    Epitaxial Technologies' overall objective is to develop innovative detector technologies that can be used to produce enhanced quantum efficiency and high detectivity VLWIR sensors that can operate at high temperatures. The goal of Phase II will be to improve the quality of the dilute nitride SL material structures and enhance the performance of the dilute Nitride IR detectors developed in Phase I ...

    STTR Phase II 2007 Department of DefenseMissile Defense Agency
  10. Highly Affordable Net- and Near-Net Forming of Fully Dense TaC for Boost Nozzle Applications

    SBC: EXOTHERMICS, INC.            Topic: MDA05068

    This Phase 2 SBIR proposal addresses the technical and manufacturing challenges associated with development of cost-effective materials solutions for ultrahigh temperature solid rocket motor throat components ¡V particularly those associated with boost nozzle solid rocket motor (SRM) or solid divert/attitude control SDACS components for vehicles such as KEI and SM-3. Exothermics and their Phase ...

    SBIR Phase II 2007 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government