List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Submarine Sensor Environmental Inference

    SBC: High Rez Consulting, LLC            Topic: N182135

    Within the increasingly contested undersea operational arena, the Navy needs a tactical and competitive advantage in undersea sensing and detection through improved situational awareness with respect to environmental parameters, such as sound speed profile (SSP) and bottom properties, that affect overall submarine sonar sensor performance. Current approaches for enhancing environmental situational ...

    SBIR Phase I 2019 Department of DefenseNavy
  2. Seamless Knitting for Military Protective Clothing

    SBC: PROPEL, LLC            Topic: N182124

    Propel will undertake research efforts to investigate seamless knitting for U.S. Navy knitwear as compared to cut and sew assembly. Propel will develop initial concepts and swatches and evaluate their technical feasibility, comparing promising concept to traditionally sewn seams using a variety of internationally recognised standards and test methods. Propel will also develop a design brief and co ...

    SBIR Phase I 2019 Department of DefenseNavy
  3. Rapid Prototype Portable Combat and Launch System

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N95053

    SEA CORP will leverage the innovative technologies developed under the prior SBIR Phase II project and extend the Research & Development (R&D) activities to the development of critical submarine combat system payload integration efforts. In the previous effort, components were successfully developed facilitating integration of Improved Submarine Launched Mobile Mine (ISLMM) capability aboard subma ...

    SBIR Phase II 2019 Department of DefenseNavy
  4. Non-collinear Wave-front Curvature Range Measurement

    SBC: MIKEL, INC.            Topic: N02025

    The goal of this Phase II SBIR is to extract more information from existing submarine acoustic sensors through a highly innovative inter- and intra-sensor correlation algorithmic, in order to provide U.S. submarines with increased acoustic superiority over increasingly quiet adversaries. U.S. adversaries are continuously improving their acoustic quieting technologies through efforts such as marine ...

    SBIR Phase II 2019 Department of DefenseNavy
  5. Solid State Radar Emitter Identification

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: N171043

    The ultimate goal of this SBIR effort is to deliver improvements to existing Fleet electronic warfare support systems by using statistical learning techniques to aid in the classification and unique identification of modern radar emitters. Since software-defined and solid-state emitters do not have the analog features traditionally used for classification, we will use more abstract, but well-defin ...

    SBIR Phase II 2019 Department of DefenseNavy
  6. Through-the-Hull Data Transfer

    SBC: Btech Acoustics, LLC            Topic: N191038

    This Phase I proposal to Topic N191-038 describes BTechs approach to transferring data through a submarine hull with a data capacity in excess of 10k bit/sec (bps) using piezoelectric ultrasonic transducers. Some of the communication techniques include signaling to increase data packet detection at lower power levels. The Phase I baseline design of the signal schemes and the transducer system will ...

    SBIR Phase I 2019 Department of DefenseNavy
  7. High energy density radioisotope batteries for highly stable and long-term reliable power generation

    SBC: Infinity Power LLC            Topic: N191041

    Nuclear batteries have enormous potential as power sources and have many benefits over other types of portable power sources. Nuclear batteries can provide power for at least as long as the isotope half-life and the energetic nature of nuclear radiation means that only a small mass of radioisotope material is required to achieve a high power output and therefore they can have power densities that ...

    SBIR Phase I 2019 Department of DefenseNavy
  8. Advanced Heat Spreader Technology for Gallium Nitride (GaN) Monolithic Microwave Integrated Circuits (MMICs)

    SBC: Thermavant Technologies, L.L.C.            Topic: N161052

    Electrical systems are being designed with ever increasing power densities, particularly future radar and electronic warfare systems built with Gallium Nitride on Silicon Carbide Monolithic Integrated Circuits (GaN MMICs). Todays GaN MMICs use solid metal, low-coefficient of thermal expansion heat spreaders (e.g., Copper-Tungsten). But solid-state heat spreaders cannot meet the size, weight, power ...

    SBIR Phase II 2018 Department of DefenseNavy
  9. Precision Machining of Composite Structures

    SBC: Product Innovation And Engineering, LLC            Topic: N181028

    The goal of this SBIR Phase I research is to demonstrate the feasibility of developing an innovative laser-based approach as a precision machining tool to machine fastener holes of Fiber-Reinforced Polymer (FRP) composites for military aircraft use. The proposed technology is a model-based laser processing (MLP) system, with an eventual goal of the Phase II/III project to commercialize the develop ...

    SBIR Phase I 2018 Department of DefenseNavy
  10. Innovative Processing Techniques for Additive Manufacture of 7000 Series Aluminum Alloy Components

    SBC: Product Innovation And Engineering, LLC            Topic: N18AT005

    The goal of this STTR Phase I research proposal is to develop a proof of concept for a novel additive manufacturing (AM) process that will be capable of processing 7000 series AM aluminum alloys while minimizing defects, with an eventual goal of Phase II/III project to commercialize the developed technology. To achieve this goal, the technical objectives, the proposed technology includes the follo ...

    STTR Phase I 2018 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government