List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Aluminum-Nitride Infrared Window Materials for High Heat Load Applications

    SBC: AP Materials            Topic: N/A

    Feasibility of fabricating IR window materials from aluminum nitride (AlN) will be demonstrated. Aluminum nitride windows are sought as replacements for sapphire windows on high speed seeker missiles because of their higher thermal shock resistance. Our approach is to consolidate high-purity ultrafine powders of AlN to obtain a nanocrystalline window. Small grain size is expected to minimi ...

    SBIR Phase I 1998 Department of DefenseNavy
  2. Unique Selected Area Deposition o Copper Onto Aluminum for Multichip Module Applications

    SBC: Brewer Science Incorporated            Topic: N/A

    The inability to deposit copper directly onto aluminum is a longstanding problem in microelectronic manufacturing. Presently, aluminum must be coated with a barrier layer such as TiN to promote copper adhesion and provide good electrical contact between the two metals. This work will demonstrate a nonaqueous galvanic process for selectively depositing a highly adherent copper coating directly o ...

    SBIR Phase II 1998 Department of DefenseAir Force
  3. Bottom Anti-Reflective Coatings (BARCs) for 193 nm Lithography

    SBC: Brewer Science Incorporated            Topic: N/A

    A long-standing trend in the integrated circuit industry is to reduce pattern geometries on semiconductor substrates. To continue this trend, the next exposure wavelength after on-going deep-ultraviolet (248 nm) will be 193 nm. This SBIR Phase I program will identify and develop thermosetting bottom anti-reflective coatings (BARCs) meeting requirements for use with 193 nm unilayer resists. A serie ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  4. Development of Uncooled Microbolometer Arrays for IR Imaging

    SBC: Brewer Science Incorporated            Topic: N/A

    Ion-implanted, thin polymer films exhibit a large temperature coefficient of resistance which suggests their application in microbolometer arrays used for infrared ( IR) imaging and temperature mapping. Compared to current microbolometer designs which require a series of difficult deposition steps, an ion-implanted polymer-based device requires only a single layer which can be applied by spin coat ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  5. SBIR PHASE I: Plasma Deposition of Organic Antireflective Coatings

    SBC: Brewer Science Incorporated            Topic: N/A

    N/A

    SBIR Phase II 1998 National Science Foundation
  6. COMPUTERIZED OUTCOMES FOR PROGRAM EVALUATION (COPE)

    SBC: Cmty Alternatives            Topic: N/A

    N/A

    SBIR Phase I 1998 Department of Health and Human Services
  7. 355 nm Laser Design for Atmospheric Measurements

    SBC: Cutting Edge Optronics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  8. ENCAPSULATED TRANSFECTED CELLS AS A THERAPY FOR MS

    SBC: Cytotherapeutics, Inc.            Topic: N/A

    N/A

    STTR Phase I 1998 Department of Health and Human Services
  9. Chemical Chara and Monitoring System (PMCMS)

    SBC: Deposition Research Lab            Topic: N/A

    This proposal describes Phase I of a research and development program to develop and commercialize a compact, affordable Particulate Matter on-line, Real-time, Physical and Chemical Characterization and Monitoring System (PMCMS), that will quickly and accurately analyze the chemical constituents and size distribution of particulate emissions from Air Force Operations. The PMCMS will provide size ...

    SBIR Phase I 1998 Department of DefenseAir Force
  10. Development of a Low Cost Process to Provide Improved Carbon Fiber-Vinyl Ester Adhesion

    SBC: DUKE & ASSOC.            Topic: N/A

    Duke & Associates will develop a process/material modification for carbon fiber/vinyl ester composite materials which will provide enhanced fiber-matrix adhesion using a low cost, room temperature process such as resin transfer molding (RTM) or vacuum assisted RTM to manufacture high performance composite structures. The program goal is to increase the fiber to matrix strength to that of carbon e ...

    SBIR Phase I 1998 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government