You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Microscopic Batteries for Use in MEMs

    SBC: BIPOLAR TECHNOLOGIES            Topic: N/A

    One of the limiting factors in the operation of MEMS is energy transmission and storage. It is often necessary to transmit energy for a MEMS from some external source into the circuit, thereby suffering power losses which can be significant. The reduction of the power losses is therefore a desirable goal. The purpose of this work is to develop and build microscopic batteries (0.0001 cm2) which can ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  2. Novel Synthesis of Fluorinated Parylenes for Low-K Interlayer Dielectric Applications in Submicron ICs

    SBC: Brewer Science Incorporated            Topic: N/A

    As IC manufacturers pursue larger wafer sizes and smaller device features (0.25 um), the interlayer dielectric material becomes critical . Current interlayer dielectric materials, inorganic oxides and spin-coated polymeric materials, have serious deficiencies (e.g.,k >3, water absorption, and spin coating defects). This has led IC manufacturers to search for low-k($6000/lb) has hampered commercial ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  3. Optical Power Limiters

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    Brimrose proposes to produce an improved material for optical power l miting at near infrared wavelengths to protect sensors against jamming and to build a prototype device. The proposed material, vanadium doped cadmium telluride, is relatively new and will be used to fabricate an electro-optic power limiter (EOPL). This approach of using a doped II-VI semiconductor for power limiting was first de ...

    SBIR Phase II 1997 Department of DefenseMissile Defense Agency
  4. Novel Photorefractive Time-Integrating Detector for the Radar Signal Processing

    SBC: BRIMROSE CORPORATION OF AMERICA            Topic: N/A

    Using newly developed II-VI photorefractive semiconductors as time integrator and high performance TeO2 acousto optic deflectors (AODs), Brimrose proposes to develop a compact RF signal processor useful in radar signal processing. The high sensitivity of this relatively new photorefractives, in the wavelength range of 0.63ym to 1.6,um, will allow signal processing using low power near infrared las ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  5. Programmable Multi-Wavelength Detector Array

    SBC: Epitaxial Technologies, LLC            Topic: N/A

    Epitaxial Technologies proposes to develop the enabling material technology for the fabrication of programmable multi-wavelength photodetector arrays. We will perform material and device design to determlne suitable material structures and epitaxial wafer growth processes. We will investigate the use of compound semiconductor structures lattice matched to InP. The main goal of this proposed Phase ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  6. A Novel Method for Manufacturing Low Cost, Large Screen, Wall-Hanging Plasma Display Panels Using a Novel Three Dimensional Camera

    SBC: TECHNEST, INC.            Topic: N/A

    Large-screen (over 35" diagonal length) wall-hanging displays have many applications in BMDO, such as flight simulation, command control center display, mission rehearsal and training, virtual reality environment development. They are also highly demanded in consumer electronics industries, such as high definition TV (HDTV), and electronic instrumentation. However, the current costs of most large ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  7. A Novel Actuator that can Produce both Linear and Rotary Motions

    SBC: TECHNEST, INC.            Topic: N/A

    This proposal presents a novel design concept to build linear and rotary uinchwormX type of actuators that can be used as active elements for static precision positioning and active strcutural dynamic control in BMDO's space structures and flight vehicles. The proposed actuator, call the Solid State Stepper Motor, exploits solid state Lead Zirconium Titanate (PZT) materials as the synchronized dri ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  8. A Novel Omnidirectional 3D Camera for Battle Field Modeling and Reconnaissance Vehicles

    SBC: TECHNEST, INC.            Topic: N/A

    To the best of our knowledge, there is no existing battle field modeling or reconnaissance technology that can provide both the real-time three dimensional (3D) range information and the omni-directional viewing capability at any cost. The primary objective of this project is to fill this gap, and to develop a high speed and low-cost 3D image sensor with an omni viewing angle (i.e., 360 degree) fo ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  9. Optimization of Cryogenic Power Switching Devices

    SBC: Hmj Corp.            Topic: N/A

    The innovative approach of operating power electronics in a crvogenic environment depends criticallv on the availabilitx of controllable semiconductor switches capable of high efficiency operation in the temperature range from about 20 K to 150 K. Thc motivation for developing this type of pouer electronics is to realize highly efficient and compact svstems with significantl! improved power/mass r ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
  10. Thermally Insulated Flexible Composite Cores for Aerospace Applications

    SBC: Infinite Materials & Products, Inc.            Topic: N/A

    Aerospace composite panels containing a core structure usually use an expanded honeycomb of either aluminum, NOMEX, or carbon fiber. These types of composite panels are often used as structure since the honey-comb core provides stiffness in the "Z" direction. However, they provide no thermal insulation value. Aerospace craft operating both inside and outside the earth's atmosphere experience envir ...

    SBIR Phase I 1997 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government