You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Fabrication of ZrC, HfC, TaC-based Fibrous Monolithic Ceramics for Rocket Propulsion Systems

    SBC: Sensintel Inc.            Topic: N/A

    The goal of this program is to develop a low cost, flexible manufacturing method for the production of high temperature ceramic composites for rocket propulsion systems. The matrix materials selected for this program will be ZrC, HfC, and TaC. These-materials have good oxidation/corrosion and ablation resistance at elevated temperatures, but typically do not possess the thermal shock resistance an ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  2. Context Dependent Prognostics and Health Assessment: A New PAradigm for Condition- Based Maitenance

    SBC: 3E TECHNOLOGIES INTERNATIONAL, INC.            Topic: N/A

    In today's military environment ships, systems, and equipment are being asked to perform at levels not thought possible a decade ago. The intent is to improve process operations and equipment reliability, availability, and maintainability without costly upgrades. Of course, these gains must be achieved without impacting combat readiness. Downsizing is also taking its toll on operations. Loss o ...

    SBIR Phase I 1998 Department of DefenseNavy
  3. Titanium-Composite Body Armor Plates

    SBC: Advanced Protection Products,            Topic: N/A

    Advanced Protection Products, Inc. (APPI) will use advanced materials and processes to develop and certify Very Light Body Armor (VLBA) plates that are capable of defeating a variety of ballistic threats. The VLBA plates will be designed using a titanium allow based metallic-composite armor system to provide cost-effective, lightweight protection. Composite facing and backing materials will be u ...

    SBIR Phase I 1998 Department of DefenseSpecial Operations Command
  4. LOW INTERFERENCE CROSS POLARIZATION PHASED ARRAY RADIATING ELEMENTS

    SBC: ALPHA OMEGA ELECTROMAGNETICS, LLC            Topic: N/A

    Phased arrays are becoming increasingly desired in communication applications because of their high performance capability and relative ease of installation into mobile platforms. However, present-day phased arrays cannot maintain pure polarization characteristics over a large scan column. This polarization degradation with scan leads to cross-polarization interference in operating in an array e ...

    SBIR Phase I 1998 Department of DefenseAir Force
  5. Microwave 3DIC-Microwave Three Dimensional Integrated Circuit

    SBC: AMCOM Communications, Inc.            Topic: N/A

    The 3DIC concept is based on using multiple levels of thin film dielectric material, each having its own ground plane and microwave circuits, to stack up multiple circuit functions on top of each other. This approach reduces the IC footprint thereby reducing the usage of the semiconductor real estate, leading to substantial reduction in cost as well as improvement in performance. The phase 1 tec ...

    SBIR Phase II 1998 Department of DefenseAir Force
  6. Aluminum-Nitride Infrared Window Materials for High Heat Load Applications

    SBC: AP Materials            Topic: N/A

    Feasibility of fabricating IR window materials from aluminum nitride (AlN) will be demonstrated. Aluminum nitride windows are sought as replacements for sapphire windows on high speed seeker missiles because of their higher thermal shock resistance. Our approach is to consolidate high-purity ultrafine powders of AlN to obtain a nanocrystalline window. Small grain size is expected to minimi ...

    SBIR Phase I 1998 Department of DefenseNavy
  7. FEROELECTRIC SCANNED ARRAY (FESA)

    SBC: ATLANTIC AEROSPACE ELECTRONICS CORP.            Topic: N/A

    A novel beamforming network is proposed to electronically scan two independent beams in a conformal phase array. The beamformer utilizes ferroelectric materials in the RF distribution network to control the amplitudes and phases of the array element excitations. One beamformer board is required for each beam and four low power DC voltages per beamformer are needed to achieve total hemispherical ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  8. Flight Verified Dynamic Simulation of the LCAC

    SBC: BAND, LAVIS & ASSOC., INC.            Topic: N/A

    The LCAC Full-Mission Trainer (FMT) is providing a cost-effective tool for training LCAC operators in normal craft operation and casualty mode conditions. However, the FMT was never validated with full-scale LCAC test data. Rather, the feel of the FMT was uning coefficients in response to inputs obtained from experienced LCAC operators. The FMT training schedule combined wi ...

    SBIR Phase I 1998 Department of DefenseNavy
  9. Fiber-Optic Instrumented Garments

    SBC: BIG LIGHT TECHNOLOGY, INC.            Topic: N/A

    Big Light Technology, Inc. proposes to develop a light weight, comfortable, flexible, form fitting instrumented garment. The instrumented garment will be capable of monitoring the skin temperature at multiple localized torso locations using fiber-optic sensors incorporated on a single optical fiber. The sensors are passive and will therefore require no external power. The method for monitoring ...

    SBIR Phase I 1998 Department of DefenseOffice of the Secretary of Defense
  10. Unique Selected Area Deposition o Copper Onto Aluminum for Multichip Module Applications

    SBC: Brewer Science Incorporated            Topic: N/A

    The inability to deposit copper directly onto aluminum is a longstanding problem in microelectronic manufacturing. Presently, aluminum must be coated with a barrier layer such as TiN to promote copper adhesion and provide good electrical contact between the two metals. This work will demonstrate a nonaqueous galvanic process for selectively depositing a highly adherent copper coating directly o ...

    SBIR Phase II 1998 Department of DefenseAir Force
US Flag An Official Website of the United States Government