You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Multifunctional Composite Structures

    SBC: Sensintel Inc.            Topic: N/A

    Military and commercial entities desire multifunctional or

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  2. Novel Rapid Prototyping Technique for the Fabrication of Structural Components

    SBC: Sensintel Inc.            Topic: N/A

    Advanced ceramics research (ACR), has developed a simple, highly promising thruster fabrication method utilizing novel gel casting and injection molding techniques. These methods will be used for the creation of low-cost thrusters and nozzles. Thefollowing proposal details a synergistic combination of the two technologies to create a thermal protection system concept that is low-cost and innovativ ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  3. Novel Low CTE Composite Materials for Propulsion Applications

    SBC: Sensintel Inc.            Topic: N/A

    Advanced Ceramics Research, Inc. (ACR) proposes to develop novel composite systems for thermal management in propulsion applications. Traditionally, phenolic-based materials are used as insulators because of their low thermal conductivity and low cost.Unfortunately, insulating nozzle and thruster liners composed of these materials suffer from short lifetimes as a result of pyrolysis at elevated t ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  4. Integrated Power Electronics Cooling System Using EHD- Enhanced Microchannel Technology

    SBC: ATEC, Inc.            Topic: N/A

    ATEC and TA&T, in collaboration with the University of Maryland, will develop a light-weight, low-cost ceramic-based, high heat flux microchannel heat sink device suitable for power electronics cooling applications. The combination of our uniquefabrication process and the incorporation of an active heat transfer enhancement technology(electrohydrodynamics, EHD) will provide an enabling technology ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  5. Highly Monodispered MINIM Arrays for Single Electron Transistors

    SBC: AMSEN TECHNOLOGIES LLC            Topic: N/A

    As the current trends in transistor miniaturization are continued down to the molecular level ( in a dimension of tens of nanometers or less), the electronic properties of solids and solid-solid interfaces are inherently different on the nanometer level.It is becoming clear that continued increases in circuit density will require fairly dramatic changes in the way transistors are designed and ope ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  6. Versatile Interconnect Prototyping

    SBC: APPLITECH            Topic: N/A

    The objective of this proposal is to demonstrate a new means to interconnect high-density electronic circuits and systems using discrete insulated wire. This insulated wire can interconnect high-density electronic devices with impedance-controlledconnections. These methods form the component receptacle from part of the interconnect wiring, where the signal and signal complement (or return) are hom ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  7. A Novel Method for Fabricating Ultra Low-Cost Radial Gradient-Index Glass Rods for Optic Communication Networks

    SBC: BEAMTEK, INC.            Topic: N/A

    This SBIR Phase II project proposed to develop a new fabrication technology that would lead to ultra low-cost, high quality radial gradient refractive index (GRIN) rods, which are widely used in fiber optic communications. Drastic cost reduction isexpected because several cost and labor intensive manufacturing processes will be eliminated, the product yield will be increased significantly compare ...

    SBIR Phase II 2001 Department of DefenseMissile Defense Agency
  8. Bilayer 157nm Bottom Anti-Reflective Coatings

    SBC: Brewer Science Incorporated            Topic: N/A

    This SBIR Phase I will develop novel chemistry platforms for 157nm bottom anti-reflective coatings (BARC's). Recent improvements in BARC's, photoresist's, and optical processes at deep ultra-violet have enabled resolution targets approaching 0.12 microns.The semiconductor industry technology roadmap calls for the introduction of 193nm processes to 0.07 microns, and BARC's are essential in achievi ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  9. Novel Materials for IR Microbolometer Arrays

    SBC: Brewer Science Incorporated            Topic: N/A

    Ion implanted, thin polymer films exhibit a large temperature coefficient ofresistance which suggest their application in microbolometer arrays used for infrared(IR) imaging and temperature mapping. Compared to current microbolometer designswhich require a series of difficult deposition steps, an ion implanted polymer-baseddevice requires only a single layer which can be applied by spin coating a ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
  10. Advanced Regenerators for Cryocoolers Operating at 10-100 Kelvin

    SBC: Chesapeake Cryogenics, Inc.            Topic: N/A

    The performance of high speed cryocoolers is highly dependent on an effective regenerator which has high heat capacity, large surface area, and low pressure drop. These factors can increase refrigeration capacity, lower operating temperatures and improveefficency. Parallel plate regenerators have been shown to be the most effective geometry possessing most of these characteristics. However, implem ...

    SBIR Phase I 2001 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government