You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Second Language Sustainment Training with the Tactical Language and Culture Training System

    SBC: ALELO TLT LIMITED LIABILITY COMPANY            Topic: OSD08CR2

    The purpose of this project is to develop new language training methods that help guard against language skill decay, and help recover from skill decay when it has occurred. It leverages previous DoD and ONR investments in language learning technology, but it focuses squarely on the language attrition problem. In addition to providing language training that is resistant to decay, it pays particula ...

    SBIR Phase II 2011 Department of DefenseOffice of the Secretary of Defense
  2. SCAP Content Editor

    SBC: G2, INC.            Topic: N/A

    NIST and G2 have been on the forefront of security automation with the development of the Security Content Automation Protocol (SCAP). However, the barrier to entry for SCAP content creation is the requirement to have in depth knowledge of the underlying specifications. This project aims to allow security experts to create SCAP content without the need to be an expert in the specification. By leve ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  3. Irradiated Environmental Chambers

    SBC: MEASUREMENT ANALYSIS CORPORATION            Topic: N/A

    Using a novel concept for humidity control, based on a proprietary saturated air source, MAC will construct and evaluate a prototype of an environmental chamber for use with NIST’s SPHERE UV source, in weathering or other UV degradation studies. The chamber will interface to the exit ports of the SPHERE, maintaining the material coupons, mounted in a standardized sample holder, at a programmed t ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  4. An Automated Lapping Apparatus and Process for High- Process for High-Precision Random Profile Roughness Specimen Fabrication

    SBC: X-Wave Innovations, Inc.            Topic: N/A

    The measurement and quality control for smooth engineering surfaces are becoming more and more important in modern science and technology due to their important engineering functions and high production costs. NIST has frequently received requests for U.S. industry to provide Standard Reference Material (SRM) high-precision, random profile roughness specimens to support smooth surface measurements ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  5. A Compact, Tamper-Resistant, Portable Fingerprint Scanner

    SBC: SBG Labs            Topic: N/A

    With the growing demand for more efficient fingerprinting techniques, live scans are rapidly displacing traditional ink-based methods. Despite improvements in detector and processing technology for capturing and digitizing fingerprints, current equipment falls well short of NIST’s goal of a small, tamper-resistant, battery-powered, handheld scanner. Incumbent equipment suppliers have little comm ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  6. High Performance Signal Processing Tools with Fluctuation-Enhanced Sensing

    SBC: Signal Processing, Inc.            Topic: 9020163R

    We propose a high performance library of signal processing tools that incorporate a newly developed technique known as fluctuation enhanced sensing (FES) to enhance the novel microsensor developed at NIST. Our goal is to improve the performance of the NIST sensor from two angles. One is to apply our existing proven algorithms to the NIST data. The other one is to incorporate advanced FES concept t ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  7. Interferometric Angle Measurement

    SBC: Optical Physics Company            Topic: 9060263R

    Optical Physics Company is proposing to implement an interferometric angle sensor for the purpose of determining the relative angle between the two diffracting crystals. Two approaches can be pursued, namely (1) the dual grating interferometer, and (2) the angle interferometer. The estimated cost of materials for building the angle sensor in quantity ranges between $2K and $12K. The expected accur ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  8. Environmental Chambers for and Integrating Sphere-based Weathering Device

    SBC: MEASUREMENT ANALYSIS CORPORATION            Topic: 9060173TT

    Using a new concept for humidity control, based on a proprietary saturated air source, MAC will develop a design for an environmental chamber for use with NIST’s SPHERE UV source, in weathering or other UV degradation studies. The chamber will interface to the exit port of the SPHERE, maintaining the material coupons, mounted in a standardized sample holder, at a programmed temperature and relat ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  9. A Versatile Microbot Fabrication Platform

    SBC: AMT Nano, LLC            Topic: 9050768R

    AMT Nano, LLC has developed innovative technology for achieving a versatile microrobot platform. The innovation relies on a unique micromolding process, which is low-cost and high-throughput, and high precison. The process achieves versatility by generating deterministic freeform shapes in polymers and nanocomposites. Several perceived benefits accompany the micromolding process. Due to the three- ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
  10. Enhanced Security Content Automation Protocol Editor

    SBC: G2, INC.            Topic: 9040577R

    G2 proposes to develop an intuitive, interactive SCAP content creation and editing utility that will provide a user-friendly operating environment. The promise of security automation offers the opportunity for great advances in software assurance, security governance/reporting, and ongoing monitoring activities. Hindering that promise is the fact that current data exchange protocols are cumbersome ...

    SBIR Phase I 2011 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government