List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. 100 mJ, 100 Hz Conductively-cooled High Brightness Laser

    SBC: Cutting Edge Optronics, Inc.            Topic: N/A

    N/A

    STTR Phase I 1999 National Aeronautics and Space Administration
  2. 3 kW High Performance Permanent Magnet Alternator

    SBC: QM Power, Inc.            Topic: A11096

    The objective of this proposed SBIR Phase I effort is to design, analyze, and demonstrate a high performance 3kW alternator that has no rare earth content and simultaneously is smaller, lighter, quieter and more efficient than alternators based on induction machines currently in the Armys inventory. QM Powers Parallel Path Magnetic Technology (PPMT) is a breakthrough magnetic circuit design that c ...

    SBIR Phase I 2012 Department of DefenseArmy
  3. 3 kW High Performance Permanent Magnet Alternator

    SBC: QM Power, Inc.            Topic: A11096

    QM Power will design, build and test a high performance 3kW alternator using Parallel Path Magnetic Technology (PPMT) with no at risk rare earth magnet materials that is smaller, lighter and more efficient than the existing alternator that uses rare earth magnets. The Parallel Path Magnetic Technology combines magnets in parallel to drive high flux densities allowing high power density and high ...

    SBIR Phase II 2013 Department of DefenseArmy
  4. 3-D Woven Conformal Antenna Structures

    SBC: APPLIED RADAR, INC.            Topic: AF05238

    Applied Radar proposes to investigate a new method of incorporating microwave antenna and feed components directly into airframe structural members. This method is based on the 3-D weaving of a resin transfer molded (RTM) fiber reinforcement preform that meets both RF and structural requirements. The result will be lighter weight, higher performance radar and communications antenna arrays for both ...

    SBIR Phase I 2005 Department of DefenseAir Force
  5. 3-D Woven Conformal Antenna Structures

    SBC: APPLIED RADAR, INC.            Topic: AF05238

    New missions require that airborne radars operate at increasing ranges with higher target resolution. This combination necessitates the cost-effective deployment of large apertures while maintaining aerodynamic performance. Externally mounted antenna arrays are not a satisfactory solution due to the large size at low frequencies, for example with UHF foliage penetration radar. Another approach emp ...

    SBIR Phase II 2006 Department of DefenseAir Force
  6. 355 nm Laser Design for Atmospheric Measurements

    SBC: Cutting Edge Optronics, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1998 National Aeronautics and Space Administration
  7. 3D Acoustic Model for Geometrically Constrained Environments

    SBC: High Rez Consulting, LLC            Topic: N16AT018

    Geometrically constrained underwater environments abrogate the simplifying acoustic modeling assumption that energy can be modeled in a two-dimensional vertical plane. In these environments, current tools to perform navigation and passive and/or active sonar mission planning are inadequate. Furthermore, channel complexity makes it difficult to model acoustic communications. HRC proposes to upgrade ...

    STTR Phase I 2016 Department of DefenseNavy
  8. 3D Polar Woven Deployable Skirt with Integrally Woven Attachment Features

    SBC: T.E.A.M., INC.            Topic: Z702

    T.E.A.M., Inc. proposes to develop and demonstrate a manufacturing method for a 3D woven deployable skirt structure with polar fiber orientation and integrally woven rib attachment features and trailing edge radii. The novelty of our approach comes from the combination of several unique textile manufacturing technologies that to our knowledge have never been successfully combined into a single pr ...

    SBIR Phase I 2017 National Aeronautics and Space Administration
  9. 50- 100 Watt Wind Energy Harvesting in Light Tactical Applications

    SBC: Pine Ridge Products LLC            Topic: A09092

    Pine Ridge Products LLC will introduce a tactical micro wind turbine that is highly efficient, robust, easy to use, maintain and transport. The Army is requesting a renewable energy system to reduce the amount of fuel used for small power loads. A vehicle mounted, efficient wind turbine system would improve self sufficiency on site by decreasing the need for fossil fuels. This will increase reliab ...

    SBIR Phase I 2010 Department of DefenseArmy
  10. 50- 100 Watt Wind Energy Harvesting in Light Tactical Applications

    SBC: Pine Ridge Products LLC            Topic: A09092

    Pine Ridge Products, LLC will introduce a tactical wind turbine that is highly efficient, robust, easy to use, maintain and transport. The Army is requesting a renewable energy system to reduce the amount of fuel used for small power loads. A vehicle mounted wind turbine system would improve self sufficiency on site by decreasing the need for fossil fuels. This will increase reliability of communi ...

    SBIR Phase II 2011 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government