You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Next-Generation Micro-chip Carrier for Cooling of Satellite Payload Electronics

    SBC: THERMAVANT TECHNOLOGIES LLC            Topic: AF112057

    ABSTRACT:A chip carrier for high power density electronics made from low CTE materials and embedded with an oscillating heat pipe will be applied to a real world satellite electronics device to transform high heat flux (e.g. 100-300W/cm2) at the device package to a lower heat flux at the heat sink areas - and do so with minimal thermal resistance. Deliverables at conclusion of two-year effort will ...

    SBIR Phase II 2015 Department of DefenseAir Force
  2. Validation Device for Cold Expanded Holes

    SBC: RESODYN CORPORATION            Topic: AF141207

    ABSTRACT: Resodyn Corporation proposes to develop a portable, cost effective, near-surface residual stress measuring tools based on electromagnetic principles. Resodyn Corporation has patented technology developed for validating cold expanded button head rivet holes.The first application in Phase I is to apply this technology to countersunk cold expanded rivet holes in 7075 aluminum. In Phase I ...

    SBIR Phase I 2015 Department of DefenseAir Force
  3. SIGMA: Speedy Imagery Geo-registration and Motion Analysis

    SBC: VISION SYSTEMS INC            Topic: AF131151

    ABSTRACT: VSI proposes the development of the SIGMA (Speedy Imagery Geo-registration and Motion Analysis) system, which will address three key requirements by the end of Phase II: (i) adapt to different type of sensors, sensor-configurations and sensor operating conditions, (ii) handle large amount of data in real-time or close to real-time using limited resources, and (iii) operate under conditi ...

    SBIR Phase II 2015 Department of DefenseAir Force
  4. Open Data Distribution Service (DDS) for use in a real time simulation laboratory environment

    SBC: Object Computing, Inc.            Topic: N08116

    The purpose of this agreement is to expand OpenDDS to be usable by all FACE application developers.OpenDDS is an open source native C++ implementation of the Object Management Group (OMG)Data Distribution Service for Real-time Systems Specification. It is also available wrapped for Java use. DDS defines a strongly typed publish-subscribe service for efficiently distributing application data betwee ...

    SBIR Phase II 2015 Department of DefenseNavy
  5. Thermally Stable High Energy Lithium-Ion Batteries for Naval Aviation Applications

    SBC: Yardney Technical Products, Inc.            Topic: N08017

    Yardney is proposing to take the technology we have previously developed in Phase 1 and move toward thinner cell designs to meet the extreme temperature and power requirements of the next generation of high power Naval Aircraft. Just as the optimum Hybrid Electric Vehicle batteries were a step towards more power and thus thinner design, the optimum battery for high power, high energy Naval aviatio ...

    SBIR Phase II 2015 Department of DefenseNavy
  6. Next Generation Boat Hull Impact and Abrasion Proofing

    SBC: RESODYN CORPORATION            Topic: N131022

    Resodyn Corporation proposes to develop a single tough thermoplastic polymer coating material and system solution for aluminum and composite boat hulls. The coating functions as an adhesive for attaching doubler plates. It encapsulates and prevents water from corroding metal substrates plus it is hydrophobic and can include corrosion inhibitors and colorant. Basic polymer components are tough ther ...

    SBIR Phase II 2015 Department of DefenseNavy
  7. Reduced-Order Model for the Prediction of Supersonic Aircraft Jet Noise

    SBC: INNOVATIVE TECH APPLICATIONS LLC            Topic: AF151065

    ABSTRACT:Innovative Technology Applications Company, LLC proposes the development of an analytical tool that predicts jet noise and engine performance for current and future generations of supersonic two- and three-stream engines. The goal is to provide robust and reliable noise predictions in minutes that can be used for design optimization. The physics-based approach will be capable of addressin ...

    SBIR Phase I 2015 Department of DefenseAir Force
  8. Multi-channel tunable ultra-stable source for all-fiber space-based atomic interactions

    SBC: ADVR, INC.            Topic: AF151080

    ABSTRACT:The development of compact, reliable inertial navigation systems is essential for applications where GPS-based systems are ineffective or unavailable. This Phase I SBIR will establish the feasibility of developing an ultra-stable, compact, robust, integrated laser source suitable for atom-based precision navigation and timing (PNT) systems. AdvRs design is enabled by capitalizing on well- ...

    SBIR Phase I 2015 Department of DefenseAir Force
  9. High Power Density Structural Heat Spreader

    SBC: THERMAVANT TECHNOLOGIES LLC            Topic: AF151094

    ABSTRACT:The proposed research effort will develop passive Oscillating Heat Pipe (OHP) structural heat spreaders to attach to small, ultra-high heat flux devices (e.g., GaN power amplifiers) and dissipate their heat loads uniformly across the spreaders' relatively large heat sinking surfaces - and do so with minimal thermal resistance. The research team will design, model, fabricate, test, and ana ...

    SBIR Phase I 2015 Department of DefenseAir Force
  10. Optical Waveguide Cross-Correlator for Attosecond Timing Synchronization

    SBC: ADVR, INC.            Topic: 32c

    This Phase II STTR will develop a precision balanced optical cross-correlator using engineered nonlinearoptical waveguides. The proposed device will be important for future advances at large scale accelerator facilities by providing a means to achieve long-term sub-femtosecond timing and synchronization of all of a facilitys optical and RF sub-systems over fiber optic links. Statement of how this ...

    STTR Phase II 2015 Department of Energy
US Flag An Official Website of the United States Government