List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase I 2003 Department of DefenseOffice of the Secretary of Defense
  2. A CAD-Programmable Environment for Developing CBM Systems for Rotorcraft

    SBC: ADVANCED STRUCTURAL TECHNOLOGY, INC.            Topic: N/A

    The objective of the Phase II research is to utilize the lessons learned from the Phase I risk reduction work to develop a prototype CAD-programmable environment for the development of condition-based maintenance systems for rotorcraft. This developmentenvironment features a CAD scenario modeler for constructing, via click n' drag modeling, fault-to-failure damage models which can account for the ...

    SBIR Phase II 2003 Department of DefenseOffice of the Secretary of Defense
  3. Cascaded Injection Locked Diode Laser Transmitter For Lidar Measurements

    SBC: ADVR, Inc            Topic: N/A

    A lidar laser transmitter useful for profiling of clouds, aerosols, and differential absorption measurements of atmospheric trace constituents such as carbon dioxide, water vapor, and ozone is proposed. The proposed laser transmitter is based on a master tunable external cavity diode laser (ECDL) used to injection lock a series of free running laser diodes (FRLD's). The FRDL's amplify the injected ...

    STTR Phase I 2003 National Aeronautics and Space Administration
  4. High-Efficiency Electro-Optic Modulators in Potassium Titanyl Phosphate Using Advanced Mode-Shaping Structures

    SBC: ADVR, Inc            Topic: N/A

    This SBIR effort will develop advanced mode-matching structures for highly efficient electro-optic amplitude modulators in potassium titanyl phosphate (KTP). The intended application for these modulators is in intra-satellite fiber-optic data buses andother satellite communication and data-handling systems. The overall goal of this effort is the fabrication of electro-optic modulators featuring l ...

    SBIR Phase I 2003 Department of DefenseMissile Defense Agency
  5. SBIR Phase I: Large Aperture, Periodically Poled, Hydrothermal Potassium Titanyl Phosphate for Highly Efficient Frequency Conversion of High-Power Solid-State and Fiber Lasers.

    SBC: ADVR, Inc            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project proposes to investigate the feasibility of fabricating large-aperture, periodic ferroelectric domain gratings for quasi-phase matched laser frequency conversion. The key innovation in this effort is the use of low temperature hydrothermally grown potassium titanyl phosphate (LTH-KTP) as the nonlinear optical substrate material. Using L ...

    SBIR Phase I 2003 National Science Foundation
  6. Enhancing Elderly Balance & Gait Using Mechanical Noise

    SBC: AFFERENT CORPORATION            Topic: N/A

    DESCRIPTION (provided by applicant): EIderly falls constitute one of the most costly health problems in the U.S., both in terms of expense to the healthcare system and in individual suffering. Fully one-third of people over age 65 fall each year, many incurring significant injuries that strongly impact their long-term health prospects and productivity. Although many factors contribute to the prop ...

    SBIR Phase I 2003 Department of Health and Human Services
  7. Enhancing Elderly Balance & Gait Using Mechanical Noise

    SBC: AFFERENT CORPORATION            Topic: N/A

    DESCRIPTION (provided by applicant): EIderly falls constitute one of the most costly health problems in the U.S., both in terms of expense to the healthcare system and in individual suffering. Fully one-third of people over age 65 fall each year, many incurring significant injuries that strongly impact their long-term health prospects and productivity. Although many factors contribute to the prop ...

    SBIR Phase II 2003 Department of Health and Human Services
  8. SBIR Phase I: Miniature NOx Sensor for Small Airborne Platforms

    SBC: Anasphere, Inc            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project is intended to develop a new type of NOx sensor for use on Unmanned Aerial Vehicles (UAVs) and other small aerial platforms. Many of these vehicles are quite small, and therefore have very limited space and weight allowances for instrument payloads - in fact, most traditional instruments used for real-time measurement of trace gas spe ...

    SBIR Phase I 2003 National Science Foundation
  9. SBIR Phase I: Nano-Aluminum Production for Lithium Ion Battery Electrodes

    SBC: AP Materials            Topic: N/A

    This Small Business Innovation Research Phase I project will develop low-oxygen, nanometer-sized aluminum powders with a narrow particle size distribution to be employed in the anodes of lithium ion batteries. Specifically, this research addresses the need to process nanometer sized aluminum particles such that they do not spontaneously oxidize on contact with air or moisture so the particles may ...

    SBIR Phase I 2003 National Science Foundation
  10. SBIR Phase II: High Surface Area Tantalum Powder for Capacitor Applications

    SBC: AP Materials            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will scale-up a new technology for producing high-surface area tantalum powders for the electronic capacitor industry. The existing technology is over 30 years old and cannot keep pace with the needs of smaller electronics, which require tantalum particles in the nanometer size range. In addition, environmental factors are driving t ...

    SBIR Phase I 2003 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government